Thread: Boldenone Cypionate recipe??

Check the homebrew forum.

Originally Posted by zmastiff

I see airseal2 has boldenone cypionate on there site now. I searched the web not finding much about the proper procedure to homebrew this compound. If anyone has a successful recipe they would like to share I would greatly appreciate it.

Used 2BA and 18BB- grapeseed oil held at 200 mg

this was as much as I could get to hold. Admittedly I'm not a great cook. I'm ok. Tried 300 and it did not hold.
Note this cames as a powder. Not a liquid

The above post is accurate.. I have been using this comp for almost 4 weeks. It is AMAZING!!! It is pretty much painless at 200mg/ml and it will hold at room temp at 200mg/ml. I'm HIGHLY experienced and I won't try over 200mg/ml(it has crashed a couple times at 200 because it got colder than room temp(approx 54 degrees), so I wouldn't advise higher potencies....

I am much more impressed with bold cyp than bold undecyclenate! and I DO like bold UD A LOT!

Originally Posted by overburdened

The above post is accurate.. I have been using this comp for almost 4 weeks. It is AMAZING!!! It is pretty much painless at 200mg/ml and it will hold at room temp at 200mg/ml. I'm HIGHLY experienced and I won't try over 200mg/ml(it has crashed a couple times at 200 because it got colder than room temp(approx 54 degrees), so I wouldn't advise higher potencies....

I am much more impressed with bold cyp than bold undecyclenate! and I DO like bold UD A LOT!

I got my hands on some bold ace... It stung like 200 mg winstrol. I do not recommend. Bold cyp is superior to bold ud.

Keep us posted how you like it... I am LOVING it!!! always like to hear feedback from others though.. some people consider other's opinion more reliable than a rep's... though I would tell you if I thought it was subpar, regardless... I feel it is not right to misadvise people, regardless that I am a rep for the sponsor... and AS2 is well aware of this... He waited til I tried the bold cyp to make it available, much like he did with another product, because he knows I will be honest about the results and my honest opinion of the products...

anyone that tries it, please chime in also and let us know what you think!

Thanks guys!

Thanks deiseljimmh, I appreciate the info. I think 200 mg is good enough for me. I'll be stacking it with test-c and deca so I'm looking forward to some great results.

Overburdened, thanks. I've been reading here for a while now and I can tell you I trust and appreciate all the great info you provide us. You are the one that got me interested in the boldenone cypionate I just couldn't find any good solid info on the homebrewing procedures. Again many thanks.

Originally Posted by zmastiff

Thanks deiseljimmh, I appreciate the info. I think 200 mg is good enough for me. I'll be stacking it with test-c and deca so I'm looking forward to some great results.

Good luck...sounds like a nice cycle...drink so much water that your slightly uncomforable.

Hey all got all the goodies from as2. Brewed up the test-c and the bold-c. I pinned the test-c(250mg/mL) yesterday and it was like silk, with no ill affects(pain) today. and Just pinned the bold-c(200mg/mL) and it was like silk as well, I'll let you all know how tomorrow goes for pain. I brewed it to the specs Deiseljimmy recommended. Still have to Deca to brew probably tomorrow.
Here is the cycle
Test-c 250 mg/w Monday morning and Thursday evening 125 mg per pin IM
bold-c 300 mg/w Monday morning and Thursday evening 150 mg per pin IM
deca 200mg/w Monday morning and Thursday evening 100 mg per pin IM
Hcg 750mg/w Monday, Wednesday and friday 250 mg per pin SQ
Adex .5 mg Tuesday and Friday.

Originally Posted by zmastiff

Hey all got all the goodies from as2. Brewed up the test-c and the bold-c. I pinned the test-c(250mg/mL) yesterday and it was like silk, with no ill affects(pain) today. and Just pinned the bold-c(200mg/mL) and it was like silk as well, I'll let you all know how tomorrow goes for pain. I brewed it to the specs Deiseljimmy recommended. Still have to Deca to brew probably tomorrow.
Here is the cycle
Test-c 250 mg/w Monday morning and Thursday evening 125 mg per pin IM
bold-c 300 mg/w Monday morning and Thursday evening 150 mg per pin IM
deca 200mg/w Monday morning and Thursday evening 100 mg per pin IM
Hcg 750mg/w Monday, Wednesday and friday 250 mg per pin SQ
Adex .5 mg Tuesday and Friday.

What's your past cycle experience?

What's up overburdened,
I've be on TRT for about a year now. This will be my second cycle. My first was 500 mg's of test c a week along with 750 mg's of hcg and adex to control estriol.

Adex to control estradiol not estriol. sorry for the typo.

Also its been 24hrs sense I pinned the Bold-c. All day long while working the pain was the same as the pain I get from Test-c which isn't bad. But, at around the 24hr mark from first pin the pain started creeping in and now I can't walk without a limp.ouch! I pinned it in my thigh, mistake. For now on I'll be pinning the bold-c in the gluteus.

That's a lot of comps for a second cycle... but the doses aren't outrageous so you should be good.... thigh injections suck... I'd stick with glutes and shoulders....

Now its been over 36hrs sense the first injection of Bold-c and the injection sight is swollen and so painful I can barely walk. I hope overburdened can shed some light on if the body gets uses't to the bold-c compound or not. If this is typical I'm not sure if this is a compound that is worth putting in my cycle. Has anyone here tried SQ injections with Bold-c?
Just to be clear I injected 100 mg's/.05 mLs of Boldenone cypionate in my left thigh.

I wouldn't put it in my thigh bro... try sticking with glutes and shoulders.. Mine is 200+mg/ml, haven't had any issues with pip... also, if you use cottonseed oil instead of GSO, it is FAR smoother!!!!

Yeah it'll definitely be gluts from here on, I'm a little afraid to pin the shoulders after what it did to my thigh. So cotton seed oil is smoother? Didn't know that, I used GSO. The injection it's self was very smooth, it was at around the 24hr mark that it started hurting like a hell. My thigh swelled up about a total of 4"biger then normal, iced it all day yesterday and it is much better today. Thanks overburdened

Originally Posted by zmastiff

Yeah it'll definitely be gluts from here on, I'm a little afraid to pin the shoulders after what it did to my thigh. So cotton seed oil is smoother? Didn't know that, I used GSO. The injection it's self was very smooth, it was at around the 24hr mark that it started hurting like a hell. My thigh swelled up about a total of 4"biger then normal, iced it all day yesterday and it is much better today. Thanks overburdened

Just for future info, heat is better than ice for that type thing... Heat draws blood to the area, so that the oil can be drawn out(as the blood is drawn out, when the heat is discontinued).. Also, being that bold cyp crashes at about 55 degrees(at 200mg/ml), ice could easily cool the oil at the site wnough to make it start crystalizing.... That's where you will have some severe pain(if you end up with little crystals in the oil pocket.... they'll irritate the hell out of the muscle around it...

as far as the shoulders, if you normally use them as an injection site, the bold isn't bad on them.... One way you can try it out is to only put .5-1ml in a syringe, then put test cyp or enanth(1ml) in with the bold.... that will lessen the pain, if it is going to cause pain(because it's not straight bold, and test cyp or enanth is generally well tolerated pretty much anywhere).. and you can gauge whether or not to stick it there (and how much is enough to where it is still not too uncomfortable) at a later date.... I don't have any problem putting 3ml of bold cyp(at 220mg/ml... always 10% overdosed)) in each delt... but I have a pretty high tolerance for most aas in my shoulders.... deca is about the only one I don't like in my shoulders, in any quantity....

Originally Posted by overburdened

Just for future info, heat is better than ice for that type thing... Heat draws blood to the area, so that the oil can be drawn out(as the blood is drawn out, when the heat is discontinued).. Also, being that bold cyp crashes at about 55 degrees(at 200mg/ml), ice could easily cool the oil at the site wnough to make it start crystalizing.... That's where you will have some severe pain(if you end up with little crystals in the oil pocket.... they'll irritate the hell out of the muscle around it...

as far as the shoulders, if you normally use them as an injection site, the bold isn't bad on them.... One way you can try it out is to only put .5-1ml in a syringe, then put test cyp or enanth(1ml) in with the bold.... that will lessen the pain, if it is going to cause pain(because it's not straight bold, and test cyp or enanth is generally well tolerated pretty much anywhere).. and you can gauge whether or not to stick it there (and how much is enough to where it is still not too uncomfortable) at a later date.... I don't have any problem putting 3ml of bold cyp(at 220mg/ml... always 10% overdosed)) in each delt... but I have a pretty high tolerance for most aas in my shoulders.... deca is about the only one I don't like in my shoulders, in any quantity....

Overburdened, thanks for the great info. Heat make sense, I have been doing heat also and it seem to be loosening up a bit yesterday but when I woke up this morning it was sore as hell again. I guess its just going to take some time.
So do you just not like deca or do you have certain areas you pin it?

Well here is the update. The first pin in the quad was a major mistake I couldn't walk for about 5 days and still have some swelling. The swelling now is a 2"circle around pinned area,it's hard and only hurts if I apply pressure. yeah I know dont apply pressure.lol
Well sense that first pin I wasn't sure if I would contenue use of the bold-c. But, I went ahead as with overburdened's recommendations and my second and third pin has been in the gluts with minimal to no pain. So lesson learned the hard way.lol Everything I have brewed up for as2 is g2g. I hope this helps some other poor fool before he makes the same mistake I did.
If your going to use the boldenone cypionate it is g2g but as suggested by overburdened and sorely verified by me do not I repeat DO NOT pin in the quads!

Originally Posted by zmastiff

Overburdened, thanks for the great info. Heat make sense, I have been doing heat also and it seem to be loosening up a bit yesterday but when I woke up this morning it was sore as hell again. I guess its just going to take some time.
So do you just not like deca or do you have certain areas you pin it?

I like it.. It's just one of those things that doesn't agree with my shoulders... For some reason it will make my shoulders HURT at 200mg/ml, but glutes are fine, even beyond 300+mg/ml


You'll get used to the bold after about 3 shots it shouldn't hurt anymore at all...

dont know much about brewing but everyone i know who carries it carries it at 200mg/ml doses if that helps at all

Originally Posted by sofargone561

dont know much about brewing but everyone i know who carries it carries it at 200mg/ml doses if that helps at all

I'd say it needs at least 50/50 EO/GSO for it not to crash below room temp.

Originally Posted by colochine

I'd say it needs at least 50/50 EO/GSO for it not to crash below room temp.

I used GSO and it held at 200 mgs for me. The coldest it has been in my house is about 70 degrees and I haven't had a problem at all. The only problem I had is making the mistake of injecting in the quad and that hurt like a MF! I have sense moved to the gluts. The second shot in the gluts a day after injection hurt pretty good but tolerable. Third shot and it seems my body is finally getting used to the new compound.
More to come, good day fellas.

Originally Posted by zmastiff

I used GSO and it held at 200 mgs for me. The coldest it has been in my house is about 70 degrees and I haven't had a problem at all. The only problem I had is making the mistake of injecting in the quad and that hurt like a MF! I have sense moved to the gluts. The second shot in the gluts a day after injection hurt pretty good but tolerable. Third shot and it seems my body is finally getting used to the new compound.
More to come, good day fellas.

It got down into the 50's and mine crashed

Originally Posted by colochine

It got down into the 50's and mine crashed

Damn that sucks. I live in south florida so it really doesn't get that cold down here. Turn on the heat bro.lol

Update: Okay, so I'm on my fourth pin of bold-c the first of which was in the quad(terrible mistake)and the last three have been in the gluts. The first pin in the gluts was 100mgs and not much pain so I bumped up the second and third pin to 150mgs trying to get my mgs up to 300mgs/week. Unfortunately 150mgs per pin has resulted in more uncomfortable pain. Looks like for me anyways I'm gonna have to do a max of 100mgs per pin. With this in mind I'm thinking of dropping the bold-c to 200mg/w and bumping the test-c up from 250mgs/w to 350mgs/w to make up for the defferance. I'm also doing 200mgs of deca per/w and 500mgs of HCG per/w.

Originally Posted by zmastiff

Update: Okay, so I'm on my fourth pin of bold-c the first of which was in the quad(terrible mistake)and the last three have been in the gluts. The first pin in the gluts was 100mgs and not much pain so I bumped up the second and third pin to 150mgs trying to get my mgs up to 300mgs/week. Unfortunately 150mgs per pin has resulted in more uncomfortable pain. Looks like for me anyways I'm gonna have to do a max of 100mgs per pin. With this in mind I'm thinking of dropping the bold-c to 200mg/w and bumping the test-c up from 250mgs/w to 350mgs/w to make up for the defferance. I'm also doing 200mgs of deca per/w and 500mgs of HCG per/w.

I think you are sensitive to the bold cyp if you are still having pain in the glutes... how much BA did you use?(too much can cause pip)

If you are having issues at 200mg/ml I would drop your bold down to 150mg/ml so it has less reaction when you inject it.... I haven't had any issues with it at over 200mg/ml, but I'm not sensitive to most aas, as far as pip goes....

You can drop the mg/ml of what you have already made by simply adding filtered oil to the bold in your vials.... Do the math to bring it down from 200 to 150.... see if that helps..