Thread: advice on price?

its 600.00 for 100gr of prop so i dont know unless you divide and i dont but thats ok i guess. itll make about 4-5 10ml vials of gear.

all depends on how effective your pct chems are, and if the are legit or not.

How do you know its 100% legit?

OP- depending on your gear and if its good, you didnt do too bad.

Originally Posted by World-Pharma.org

How do you know its 100% legit?

Oh the irony...

well can you buy 4-5 vials of test prop for 96 usd? so u made out well. just cook it right or your probably not a beginer if your ordering that much. i can cook good but its time consuming and iam to impatient. but you save alot of cash that way. how many grams are u using per vial and ba/ bb? unless you cook it all at once?

Originally Posted by Mike09100

Oh the irony...

Dear friend,

Buy only THAI FDA approved powder then powder be legit 100% !

Originally Posted by World-Pharma.org

How do you know its 100% legit?

WP and you wonder why people bust your balls, no disrespect but thats not in your sponsor thread brother. and again iam not being disrespectful just giving you a heads up bro.

This is my first time homebrewing and my recipe calls for
5 grams powder
36.25 ml grapeseed oil
2.5ml Benzyl Alcohol = 5%
7.5ml Benzyl Benzoate =15%
it will make 50 ml @ 100mg/ml

I know the BA is probably a bit high but I could not find a recipe that calls for less. If anybody has a recipe I would appreciate it. If not I will stick with my recipe and deal with the pain.

winni recipe is (suspension):

-2 grams stanozolol powder X 0.75 displacement volume = 1.5mL
-24% BB = 4.8mL
-3% BA = 0.6mL
- 3% Polysorbate 80 = 0.6mL
-DISTILLED Water (ONLY use Distilled Water!) 12.5mL
makes 20ml @ 100mg/mL

Originally Posted by unclem

well can you buy 4-5 vials of test prop for 96 usd? so u made out well. just cook it right or your probably not a beginer if your ordering that much. i can cook good but its time consuming and iam to impatient. but you save alot of cash that way. how many grams are u using per vial and ba/ bb? unless you cook it all at once?

Originally Posted by World-Pharma.org

How do you know its 100% legit?

ARGH!





/V

As far as being legit gear. I am pretty sure it is legit. I have been scoping the source for 2 years now with occasional emails to which they replied back everytime within 24 hours. The website looks as if it has a ton on money invested and not just a throw-it-up-cookie-cutter-template. I have the powder but waiting on pct and anti-estro. Powder appears to be legit as far as visual confirmation.
I bought .22 whatmans...will this do the trick? I could not find a recipe that said whether or not it was .22 or 45 whatmans. Also I could not find 18g pins, will my 25g work? Agian thanx in advance. I always rep

Originally Posted by pyes

This is my first time homebrewing and my recipe calls for
5 grams powder
36.25 ml grapeseed oil
2.5ml Benzyl Alcohol = 5%
7.5ml Benzyl Benzoate =15%
it will make 50 ml @ 100mg/ml

I know the BA is probably a bit high but I could not find a recipe that calls for less. If anybody has a recipe I would appreciate it. If not I will stick with my recipe and deal with the pain.

winni recipe is (suspension):

-2 grams stanozolol powder X 0.75 displacement volume = 1.5mL
-24% BB = 4.8mL
-3% BA = 0.6mL
- 3% Polysorbate 80 = 0.6mL
-DISTILLED Water (ONLY use Distilled Water!) 12.5mL
makes 20ml @ 100mg/mL

i dont fuck with the winni or susp test. i thought it was 2grams of powder for 10ml of prop. thats wat i used on mine. but go by wat you were told. no your ba/ bb r right on no worries. its your first time so go through the motions before you start it going. its real easy but the winni and test susp is fucking hard brother because you got to get it just right. i get mine cheap so i dont try it anymore i fucked up the crystals the first time on both. what temp are you cooking it till? . it looks good bro dont worry about your solutions there right on. i just question the powder used. but maybe mine was overdosed but it didnt crash or nothing. dont listen to me it looks great brother good luck and hope it works out for you just do a run through first then cook. i just looked at my pictures i took step by step it was enanthate i cooked. i cooked it at 175 f in oven no troulble bro. if i were you i would doulble check the powder your using its going to lose some in the brewing process. i used 13 grams for 50ml vial of test e i think you should google around and find a place to doulble check your powder measurements. i checked a site but it didnt have the prop. it had shit but you could try basskilleronline.com he shows how to i dont know if your cooking prop is on there. just trying to help ya out but the powder seems way way to low for 50ml. but its the best that fits you. your right on with your ba/bb and oil. just account for evaporation loss. but i dont know about prop it was test e i brewed.

Originally Posted by unclem

i dont fuck with the winni or susp test. i thought it was 2grams of powder for 10ml of prop. thats wat i used on mine. but go by wat you were told. no your ba/ bb r right on no worries. its your first time so go through the motions before you start it going. its real easy but the winni and test susp is fucking hard brother because you got to get it just right. i get mine cheap so i dont try it anymore i fucked up the crystals the first time on both. what temp are you cooking it till? i used a hot plate. it looks good bro dont worry about your solutions there right on. i just question the powder used. but maybe mine was overdosed but it didnt crash or nothing. dont listen to me it looks great brother good luck and hope it works out for you just do a run through first then cook.

My prop recipe says anywhere between 212F and 275F is good!?!
and the winni says just heat and swirl until solution is clear

Originally Posted by unclem

i dont fuck with the winni or susp test. i thought it was 2grams of powder for 10ml of prop. thats wat i used on mine. but go by wat you were told. no your ba/ bb r right on no worries. its your first time so go through the motions before you start it going. its real easy but the winni and test susp is fucking hard brother because you got to get it just right. i get mine cheap so i dont try it anymore i fucked up the crystals the first time on both. what temp are you cooking it till? i used a hot plate. it looks good bro dont worry about your solutions there right on. i just question the powder used. but maybe mine was overdosed but it didnt crash or nothing. dont listen to me it looks great brother good luck and hope it works out for you just do a run through first then cook.

correct me if I am wrong but I thought 2 grams is 2000mg...if you make it at 10 ml...then you have 200mg/ml @ 10ml right?

How will I know if it crashes? what does it look like? Sorry for all the questions bro.

Originally Posted by VictorZ06

ARGH!





/V

I share your frustration my friend.

Originally Posted by pyes

correct me if I am wrong but I thought 2 grams is 2000mg...if you make it at 10 ml...then you have 200mg/ml @ 10ml right?

yeah your right there but i used 13 grams of test e for, oh 300mg ml oh ok your right but are you counting on the loss part but i guess cooking prop is different, fuck i couldnt find anything on pro. but did this recipe come with its all made instructions if so then its right. just curious thats all. ive done eq, deca, tren e , tren ace pellets well you can do that blindfolded. yeah do it the way u found the recipe. it just seems so low of powder concentration. dont pay no mind and let you get all screwed up do it the way u got it i shouldnt of said nothing. good luck bro let me know how it works for ya i wish ya all the best brother.

Originally Posted by pyes

How will I know if it crashes? what does it look like? Sorry for all the questions bro.

youll have crystals that wont melt when you pull it out of the oven after it cools and your ready to try and filter it, there be like pieces of glass in it that just settle in the bottle. wat you do in the case is take all crystals out or try and bake for another 15 minutes at lower temps if that fails just get all the remaining crystals out and then put on hot plate on high until its all oil get it off hot plate then your ok. then let cool and filter as u know how. it wont do that if the correct amount of ba/bb with the powder is right. which i think your ok with the ba/bb.

hey brother why not after you get a few brewings under your belt , why dont we sell s, no iam just fucking around i dont have the patience no more even though its alot cheaper especially the eq , deca, the tren e is raws are very expensive.

Originally Posted by unclem

youll have crystals that wont melt when you pull it out of the oven after it cools and your ready to try and filter it wont there be like pieces of glass in it that just settle in the bottle. wat you do in the case is take all crystals out or try and bake for another 15 minutes at lower temps if that fails just get all the remaining crystals out and then put on hot plate on high until its all oil get it off hot plate then your ok. then let cool and filter as u know how. it wont do that if the correct amount of ba/bb with the powder is right. which i think your ok with the ba/bb.

cool ty bro, I hope all goes well as I do not have a lot to play with. If it crashes and i follow your advice, can I still use the solution and what will the concentration be as far as actual test left in it?

Originally Posted by unclem

yeah your right there but i used 13 grams of test e for, oh 300mg ml oh ok your right but are you counting on the loss part but i guess cooking prop is different, fuck i couldnt find anything on pro. but did this recipe come with its all made instructions if so then its right. just curious thats all. ive done eq, deca, tren e , tren ace pellets well you can do that blindfolded. yeah do it the way u found the recipe. it just seems so low of powder concentration. dont pay no mind and let you get all screwed up do it the way u got it i shouldnt of said nothing. good luck bro let me know how it works for ya i wish ya all the best brother.

Test Prop for 5 grams
Needed
5 grams powder
36.25 ml sesame oil
2.5ml Benzyl Alcohol = 5%
7.5ml Benzyl Benzoate =15%
Syringes 3cc & 5/10cc
18 or 20 gauge needles
mixing Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA & BB to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though Whatman filter.
10. Take other syringe with 2ml oil, run through Whatman into solution.
Makes 50 ml @ 100mg/ml

I am sorry as I do not know who is the originator of the recipe to give credit due. but I got it here basskilleronline dot com/powder-instructions dot shtml
Also I am smart enough to not use muffin pans lol wtf? I got a set of pyrex beakers ^_^

Dear friends,

To sure 100% rel, you must buy THAI 3rd world country FDA approve WHO powder. (spelled like 3rd would country englash)

Originally Posted by GymRat707

Dear friend,

Buy only THAI FDA approved powder then powder be legit 100% !

Originally Posted by pyes

Test Prop for 5 grams
Needed
5 grams powder
36.25 ml sesame oil
2.5ml Benzyl Alcohol = 5%
7.5ml Benzyl Benzoate =15%
Syringes 3cc & 5/10cc
18 or 20 gauge needles
mixing Vial
Sterile Vial
Whatman sterile filter

1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA & BB to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach Whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though Whatman filter.
10. Take other syringe with 2ml oil, run through Whatman into solution.
Makes 50 ml @ 100mg/ml

I am sorry as I do not know who is the originator of the recipe to give credit due. but I got it here basskilleronline dot com/powder-instructions dot shtml
Also I am smart enough to not use muffin pans lol wtf? I got a set of pyrex beakers ^_^

looks good it wont crash because it has the right ratios. just cook away. boy then thats cheap for prop. if it does crash just reheat on a oven again then if no change then get the crystals out and continue you wont lose much. but if the recipe called for that then its right. i got mine off basskilleronline.com but he added pictures since i cooked mine. i looked. ill still pay the price for the already made stuff i dont have patients no more its fun the first 5 times then it gets frustrating pulling that fucking 10g syringe then trying to filter it through the whatman. sometimes i would get lucky and get all the air out. but its a bitch if theres air trapped in the filter. so now i just do tren, and even now i might go back to dmso and 3 pellets and apply to skin, iam getting sick of brewing the pellets into oil now. but i always add about 4 xtra pellets to the 20ml vial its nice and gold then and its strong as hell.and i only use 2ml of ba, 3ml bb to the cottonseed oil, or seseamee seed oil which ever is the cheapest they have at the time.