Thread: Preloading pins

How far ahead are you preloading them? I would say there is more a risk preloading water based gear than oil based.

If you have a very sterile technique and no air in the barrel you should be good. But I probably wouldn't preload a month out, maybe a week max if you're doing ED pins.

Originally Posted by colochine

How far ahead are you preloading them? I would say there is more a risk preloading water based gear than oil based.

If you have a very sterile technique and no air in the barrel you should be good. But I probably wouldn't preload a month out, maybe a week max if you're doing ED pins.

Yeah that's similar to what I was thinking more of risk. If it is ok what's the window? 2 days worth? 20 days worth? I'm not preloading any,just more for discussion and knowledge cause I'm not sure

Bumped for input ....

I preload my trt pins for the week, but Im using oil based gear.

Originally Posted by Dath

So my question is would there be any concern for bacteria growth in preloading say a weeks worth of Water based compounds such as test suspension, winny?
What about hgh, or hcg?

I wouldn't think so with the suspension or winstrol, but why chance it? I would just wait to use it until you need it. If something comes up and you have to stop, the gear in the pin is wasted, unless you pin it back into the vial, but then you wasted a pin.

I am not a fan of pre-loading anything.

I'd do a week ahead max. I think some purpose of preloading is that slin pins take so damn long to draw back oil so if you load em at the beginning of the week you won't be rushed when it comes time to pin. Just my 0.02...

Originally Posted by colochine

I'd do a week ahead max. I think some purpose of preloading is that slin pins take so damn long to draw back oil so if you load em at the beginning of the week you won't be rushed when it comes time to pin. Just my 0.02...

You actually draw oil with a slin pin?

You're supposed to pull the plunger out and use an 18g 1.5" needle to fill it attached to a 5 or 3cc syringe.

Originally Posted by XYZ

I wouldn't think so with the suspension or winstrol, but why chance it? I would just wait to use it until you need it. If something comes up and you have to stop, the gear in the pin is wasted, unless you pin it back into the vial, but then you wasted a pin.

I am not a fan of pre-loading anything.

Yeah I'm not planning to find out the hard way XYZ lol.
I'll preload 2-3 days worth of oil sometimes though.
Gonna be adding in test suspension couple times a week and the thought of preloading it came to mine, hence the thread here.
Thanks for the input bro.

I have seen research that say's you can pre-load HCG and keep it in the fridg and you could use them for up to a month, but then after that the potency may start to drop.

Many pre-load peps like IFG-1 LR3 with BA Water and freeze it; that way you have it all out of the vial and it will not degrade if frozen. You just take it out 10-15 minutes before and you are good to go.

Originally Posted by XYZ

You actually draw oil with a slin pin?

I just preloaded 3 weeks worth of oil so if I get an infection and my shoulder falls off, i'll let you guys know

Originally Posted by pieguy

I just preloaded 3 weeks worth of oil so if I get an infection and my shoulder falls off, i'll let you guys know

keep us updated

What about water based Winny that is not preloaded? In other words, at the end of a cycle you still have most of a vial of winny left over. Will that still be good months later for your next cycle, or is there a concern for bacteria because of the water base?

Originally Posted by malfeasance

What about water based Winny that is not preloaded? In other words, at the end of a cycle you still have most of a vial of winny left over. Will that still be good months later for your next cycle, or is there a concern for bacteria because of the water base?

There's a higher risk with H2o based products, but as long as you now and trust your source from the start, there should be no issue with leftover gear still in its sterile vial.

Originally Posted by XYZ

You actually draw oil with a slin pin?

You're supposed to pull the plunger out and use an 18g 1.5" needle to fill it attached to a 5 or 3cc syringe.

I've done it once, then I backfilled them the next time which was easier. If you don't mind sitting there and waiting for like 5 minutes for each slin pin I don't see a problem with drawing oil in them. Its also more sterile in the sense that the open barrel never comes into contact with air.

To each his own though.

Drawing in a slin pin dulls the needles so I backload them. I load about a months worth of pins to save on needles. I'm not really concerned with the time used for loading them .I haven't had any problems yet.

Originally Posted by colochine

I've done it once, then I backfilled them the next time which was easier. If you don't mind sitting there and waiting for like 5 minutes for each slin pin I don't see a problem with drawing oil in them. Its also more sterile in the sense that the open barrel never comes into contact with air.

To each his own though.

Screw that. 5 minutes?

As far as contamination, I don't buy it. I've done it that way for at least 3-4 years now and have never had any type of problem at all.

Originally Posted by colochine

I've done it once, then I backfilled them the next time which was easier. If you don't mind sitting there and waiting for like 5 minutes for each slin pin I don't see a problem with drawing oil in them. Its also more sterile in the sense that the open barrel never comes into contact with air.

To each his own though.

Air will not contaminate your gear to the point where you will have infection issues. Backloading is the ONLY way to slin pin. Who the fuck wants to wait 5 mins?

I tried drawing oil with a slin pin once, as far as I could tell it wasn't going to draw anything. I pulled the plunger all the way til it was damn near about to pop out and it still wasn't enough pressure for more than a drop of oil to go in. Maybe it's the oil or the gauge I'm using or maybe I just didn't wait long enough lol

I work offshore everyone who uses gear I work with which is a good many people all preload. We all work a 21 on 21 off schedule. Have never had any issues.

Originally Posted by Dath

So my question is would there be any concern for bacteria growth in preloading say a weeks worth of Water based compounds such as test suspension, winny?
What about hgh, or hcg?

As long as you use sterile techniques no worries.

Refrigerate the GH and HCG after pre-loading the pins.

Originally Posted by heavyiron

As long as you use sterile techniques no worries.

Refrigerate the GH and HCG after pre-loading the pins.

Thanks for weighing in Heavy,

Oils that's a no brainer, same with the refrigerating GH hcg.
Just hadn't seen many threads regarding waterbased compounds.
Thanks again sir

Originally Posted by heavyiron

As long as you use sterile techniques no worries.

Refrigerate the GH and HCG after pre-loading the pins.

^^what he said. No one mentioned refrigeration up until this point.

I take a few minutes on a saturday or sunday and do the weeks supply. When i do it on a sunday I dont waste any pins, on a saturday i only sacrifice the pin for back filling.