-->
Pages: 1

Injection question


(Click here to view the original thread with full colors/images)



Posted by: Copia

What is recommended for one to inject all parts or can one inject the same spot? If I wanted to inject in my thigh could I continue to do that or should I mix it up?

Also what size pins are ideal?


Posted by: kicka19

Quote:
Originally Posted by Copia View Post
What is recommended for one to inject all parts or can one inject the same spot? If I wanted to inject in my thigh could I continue to do that or should I mix it up?

Also what size pins are ideal?
do some research, what are you using


Posted by: Copia

Quote:
Originally Posted by kicka19 View Post
do some research, what are you using
My apologies I did my research, spotinjections =

25 G 1"


Posted by: Pirate!

Rotate various sites. Glutes, quads, and delts are good options. Most oil is too thick to move through 25 g smoothly. When you have to push hard, you end up wiggling the needle around. This causes more damage than using a larger needle. I use 22 g on glutes and 23 g elswhere.

For quad shots, stick the side. Spot injections has some good and some bad shots. Don't stick the front of your quad.


Posted by: Copia

Thanks for the post man, as far sustanon 250 and deca are concerned are they too thick to go through 25?


Posted by: Fitgirl70

Here's a tip for using oil based injectibles -- especially if it's as thick as say, a progesterone. Take a paper towel and fold it up so that it's about 1 inch wide (you can use only half a paper towel if you like), run hot water on it and then wrap your syringe in the hot towel. It will thin out the oil a little and make it easier to inject. It won't hurt as much going in as they are IM as normal.

Also, use an ice cube to numb the inj. site a little. This should make it much more comfortable to inject...


Posted by: Fitgirl70

PS, I have a lot of 30, 23, and 22's if anyone wants them. Lots of alcohol preps too.


Posted by: BigDyl

Quote:
Originally Posted by Fitgirl70 View Post
PS, I have a lot of 30, 23, and 22's if anyone wants them. Lots of alcohol preps too.
Are you a nurse?


Posted by: Fitgirl70

Damn well should be! No, just have had to do plenty of Sub Q and IM injectibles, had plenty of classes and have plenty of loot leftover.


Posted by: Pirate!

Quote:
Originally Posted by Copia View Post
Thanks for the post man, as far sustanon 250 and deca are concerned are they too thick to go through 25?
It varies by brand, but I haven't seen any that I'd want to push through a 25 g. I used to have to heat my sustanon amps to get the sustanon to go through. Much better to use 23 g.


Posted by: microtel

Quote:
Originally Posted by Pirate! View Post
Rotate various sites. Glutes, quads, and delts are good options. Most oil is too thick to move through 25 g smoothly. When you have to push hard, you end up wiggling the needle around. This causes more damage than using a larger needle. I use 22 g on glutes and 23 g elswhere.

For quad shots, stick the side. Spot injections has some good and some bad shots. Don't stick the front of your quad.

Don't stick the front of ur quad? why not?

I prefer a 21 Guage, 1" --it's very easy to
inject but just go straight in w/o hesitation.
if u hesitate you hurt...I never do any other
area except the quads both side and front,
I let a nurse do my glutes...;-))


Posted by: Pirate!

See the colorless band that runs across the top of the thigh? You don't want to hit this. Muscle 1 (red) has a long tendon, which you don't want to hit, either. Coming from the top, you would have to hit the muscle between the band and your tendon, which isn't much room, and you don't know exactly where that is. Now, look at Muscle 2 (pink). Coming in from the side, you have lots of room to work with and mimimal obstructions.


Posted by: VMSEddieF

i'll tell you its hard using 26g for just .5 cc of Cyp. thats what i used in bi's and it takes 5 seconds for that little. the wiggling thing or not i should say is a good tip. i vote 24g. gonna try 1 when these run out.


Posted by: Copia

Testing...


Posted by: Copia

I found the needles i need from tipz they are 23G 1" x 3cc, what is the correlation of the 3cc I am guessing it show much content it can hold? and if so will it hold 250ml?


Posted by: VMSEddieF

1cc =1ml
3cc = 3ml


Posted by: Tommy_M

one CC (cubic centimeter) is same as 1 ml (mililiter)


Posted by: dg806

Quote:
Originally Posted by Copia View Post
I found the needles i need from tipz they are 23G 1" x 3cc, what is the correlation of the 3cc I am guessing it show much content it can hold? and if so will it hold 250ml?
That would be (25) 10ml bottles of gear!


Posted by: microtel

Quote:
Originally Posted by VMSEddieF View Post
1cc =1ml
3cc = 3ml




1cc= 200mg


Posted by: VMSEddieF

Quote:
Originally Posted by microtel View Post
1cc= 200mg
He asked volume not dose. 200mg is correct if its 200mg per cc, ml whatever.



(Click here to view the original thread with full colors/images)





vBulletin Copyright ©2000 - 2008, Jelsoft Enterprises Limited.


Content Relevant URLs by vBSEO 3.1.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40