Thread: Sarms S-4

Research it........

Originally Posted by CEM Store

Research it........

I will..........

The question is: comparing to testosterone results, S4 is weaker or stronger, and how much?

I've tried ostarine (osta-rx), and the gains were comparable to a very mild test cycle. (I'd say equivocal to 250 mg/week). Decent strength gains (10-20 lbs on lifts) and I'd say 5 lbs. Difficult to say since weight fluctuates dramatically for me.

Its nothing mind blowing, but it should be stronger than S-4, and probably would work best over the course of 2-3 months cycle.
I've heard of it causing mild supression, but nonetheless- I can see it being a very viable PCT solution for coming off a heavy cycle. (nolva/clomid/ostarine)

It could help you hold on to alot more muscle mass and strength post cycle, while your test levels are being brought back up.

Bump for more research....

I have used it during pct with pretty fair results. S-4, igf, clomid and clen has been a pretty consistant pct protocol for me for the last couple of years. It's mild but it keeps the pump going gives you some gym motivation...
Careful at night when you get up to piss. It's hard to explain but you will know it when you see it or don't see it depending on how you "look" at it.

Keep it at the top.....

Click here to get your quality SARMs S4

Go here >> Sarms S4

Interesting research chem......

Good info here for a quick read :-)

Great research product >> Sarms S4

Originally Posted by CEM Store

S4 sounds too good to be true ? but it isn?t. The trick is that S4 is very difficult to manufacture, thus hard to find in a quality form. Our S4 is manufactured to the highest standard, allowing for the highest bioavailibility. Its made to 99% purity and dosed appropriately to ensure a true 50mg/ml dosage.

What is a SARM anyway?

A SARM (Selective Androgen Receptor Modulator) selectively binds to androgen receptors, allowing it to exert the benefits of an androgen in the absence of many of the undesired effects. To better understand this, one must look at a traditional androgen ? which binds in indiscriminately to androgen receptors. The primary example of a traditional androgen would be testosterone. Testosterone is non selective in its binding activity (it will bind to androgen receptors anywhere), so all the effects an androgen will exert would be observed in your research. Some examples of this would be testicular atrophy, hpta ?shut down?, decrease in bone mineral density, etc.

S4 , on the other hand , primarily (selectively) binds to androgen receptors in muscle tissue , allowing for increases in muscle mass and decreases in body fat comparable to a traditional androgen (testosterone), without the other effects mentioned above being observed. Its gets better. While S4 when manufactured properly is highly bioavaiable when taken orally, the traditional liver toxicity associated with oral steroids will not be observed.


Refs:
Gao W, Kim J, Dalton JT. Pharmacokinetics and pharmacodynamics of nonsteroidal androgen receptor ligands. Pharmaceutical Research. 2006 Aug;23(8):1641-58.

Yin D, Gao W, Kearbey JD, Xu H, Chung K, He Y, Marhefka CA, Veverka KA, Miller DD, Dalton JT. Pharmacodynamics of selective androgen receptor modulators. Journal of Pharmacology and Experimental Therapeutics. 2003 Mar;304(3):1334-40


Check it out Liquid S4 30mL 50mg/mL

Read about it ^^^

Originally Posted by CEM Store

Great research product >> Sarms S4

Then research it ^^^

Bump for a truly astounding compound !

bump for research....

Keep on researching and learning.

Originally Posted by CEM Store

S4 sounds too good to be true ? but it isn?t. The trick is that S4 is very difficult to manufacture, thus hard to find in a quality form. Our S4 is manufactured to the highest standard, allowing for the highest bioavailibility. Its made to 99% purity and dosed appropriately to ensure a true 50mg/ml dosage.

What is a SARM anyway?

A SARM (Selective Androgen Receptor Modulator) selectively binds to androgen receptors, allowing it to exert the benefits of an androgen in the absence of many of the undesired effects. To better understand this, one must look at a traditional androgen ? which binds in indiscriminately to androgen receptors. The primary example of a traditional androgen would be testosterone. Testosterone is non selective in its binding activity (it will bind to androgen receptors anywhere), so all the effects an androgen will exert would be observed in your research. Some examples of this would be testicular atrophy, hpta ?shut down?, decrease in bone mineral density, etc.

S4 , on the other hand , primarily (selectively) binds to androgen receptors in muscle tissue , allowing for increases in muscle mass and decreases in body fat comparable to a traditional androgen (testosterone), without the other effects mentioned above being observed. Its gets better. While S4 when manufactured properly is highly bioavaiable when taken orally, the traditional liver toxicity associated with oral steroids will not be observed.


Refs:
Gao W, Kim J, Dalton JT. Pharmacokinetics and pharmacodynamics of nonsteroidal androgen receptor ligands. Pharmaceutical Research. 2006 Aug;23(8):1641-58.

Yin D, Gao W, Kearbey JD, Xu H, Chung K, He Y, Marhefka CA, Veverka KA, Miller DD, Dalton JT. Pharmacodynamics of selective androgen receptor modulators. Journal of Pharmacology and Experimental Therapeutics. 2003 Mar;304(3):1334-40


Check it out Liquid S4 30mL 50mg/mL

Incredible product ^^

Interesting research product.

Originally Posted by CEM Store

S4 sounds too good to be true ? but it isn?t. The trick is that S4 is very difficult to manufacture, thus hard to find in a quality form. Our S4 is manufactured to the highest standard, allowing for the highest bioavailibility. Its made to 99% purity and dosed appropriately to ensure a true 50mg/ml dosage.

What is a SARM anyway?

A SARM (Selective Androgen Receptor Modulator) selectively binds to androgen receptors, allowing it to exert the benefits of an androgen in the absence of many of the undesired effects. To better understand this, one must look at a traditional androgen ? which binds in indiscriminately to androgen receptors. The primary example of a traditional androgen would be testosterone. Testosterone is non selective in its binding activity (it will bind to androgen receptors anywhere), so all the effects an androgen will exert would be observed in your research. Some examples of this would be testicular atrophy, hpta ?shut down?, decrease in bone mineral density, etc.

S4 , on the other hand , primarily (selectively) binds to androgen receptors in muscle tissue , allowing for increases in muscle mass and decreases in body fat comparable to a traditional androgen (testosterone), without the other effects mentioned above being observed. Its gets better. While S4 when manufactured properly is highly bioavaiable when taken orally, the traditional liver toxicity associated with oral steroids will not be observed.


Refs:
Gao W, Kim J, Dalton JT. Pharmacokinetics and pharmacodynamics of nonsteroidal androgen receptor ligands. Pharmaceutical Research. 2006 Aug;23(8):1641-58.

Yin D, Gao W, Kearbey JD, Xu H, Chung K, He Y, Marhefka CA, Veverka KA, Miller DD, Dalton JT. Pharmacodynamics of selective androgen receptor modulators. Journal of Pharmacology and Experimental Therapeutics. 2003 Mar;304(3):1334-40


Check it out Liquid S4 30mL 50mg/mL

Research it ^^

Sign up for our newsletter to get the latest product articles, sales and promotions.