IronMag Research Chems


test cyp looks like a gel in vail?

Results 1 to 25 of 25
  1. #1
    Registered User


    Join Date
    Mar 2012
    Gender
    Male
    Location
    usa
    Posts
    13
    Rep Points
    10

    test cyp looks like a gel in vail?

    Has anybody ever gotten a vial like this? it looks like a gel inside the vial almost pasty. If so has anybody still used it? i would think that its bunk gear cause looks a little sketchy.... the other vial i got was fine. (oily liquid)

  2. #2
    DRSE
    SUPER MODERATOR
    dieseljimmy's Avatar


    Join Date
    Oct 2011
    Gender
    Male
    Location
    chicagoland
    Posts
    6,931
    Rep Points
    2147483647

    Nope. Would not recommend injecting

  3. #3
    Registered User


    Join Date
    Mar 2006
    Posts
    52
    Rep Points
    358498

    Quote Originally Posted by zeus77 View Post
    Has anybody ever gotten a vial like this? it looks like a gel inside the vial almost pasty. If so has anybody still used it? i would think that its bunk gear cause looks a little sketchy.... the other vial i got was fine. (oily liquid)
    Can you post a pic? The cyp may have crashed. The way you describe it sounds different but it may be this. I could tell be looking. If it did indeed crash, all you need to do is carefully heat the vial and all will be good.

  4. #4
    Registered User


    Join Date
    Mar 2006
    Posts
    52
    Rep Points
    358498

    The more I think about this the more I believe it did crash. We only see cyp at 200 and 250mg/ml. This is because the test c won't hold at a higher mg/ml. Test E does as do many other types of gear. I'm not sure if there is a home brew or lab forum here....if there is those guys will back up what I'm telling you. Good luck. Don't chuck it till u know.

  5. #5
    Registered User


    Join Date
    Mar 2012
    Gender
    Male
    Location
    usa
    Posts
    13
    Rep Points
    10

    ya ill try put up a picture. What do you mean by crashed? Ive never hurd of that to be honest. ya its 200mg. if it did crash how would i go about heating it up

  6. #6
    Registered User


    Join Date
    Mar 2011
    Gender
    Male
    Location
    USA
    Posts
    516
    Rep Points
    21156996

    Set the oven to 250. Insert a syringe needle but keep the tip above the product, and insert it at an angle. Bake it for 30.

  7. #7
    Registered User


    Join Date
    Mar 2012
    Gender
    Male
    Location
    usa
    Posts
    13
    Rep Points
    10

    alright ill try it out an see what what it looks like i put a picture on. still has to be approved

  8. #8
    Registered User


    Join Date
    May 2011
    Gender
    Male
    Location
    United States
    Posts
    687
    Rep Points
    17153104

    It's straight man, it's not just test cyp, it's a blend. 250 mgs test cyp + 250 mgs of your sources semen.

  9. #9
    Registered User


    Join Date
    Mar 2006
    Posts
    52
    Rep Points
    358498

    Quote Originally Posted by dieseljimmy View Post
    Nope. Would not recommend injecting
    I would agree if its not something as simple and easy/safe to correct. Test is so affordable these days. However, I'm an older fella. My grandparents grew up during the depression. No need to waste it. Your test may have been exposed to cold temps during shipping. What happens is that the raw powder won't hold in the solution it was brewed in. The test separates from the solvent its brewed with. All you need to do is heat her up and like magic the test is mixed back with the solution. I had a friend just a month or so ago just bring some crashed gear in from the outside to room temp and it mixed. I used to brew my own gear. The prices are so wonderful these days its not worth my time anymore.
    I've not used the oven to do so as kuvinny proposes...but that would work also. I heat a pan on the stove to med high and warm her up.Keep an eye on her whilst you do this. No danger to you my friend. Respect.

  10. #10
    SuperHuman
    ELITE MEMBER
    superman39's Avatar


    Join Date
    Apr 2011
    Gender
    Male
    Location
    USA
    Posts
    144
    Rep Points
    719189

    It may be sperm in there. Lmao! All jokes aside, where did u get it from?

  11. #11
    Registered User


    Join Date
    Oct 2011
    Gender
    Male
    Location
    Persevering to Succeed
    Posts
    380
    Rep Points
    9971446

    If it were me I would scrap the vial and not use the brand again. Even though one vial looks ok and one doesn't, I wouldn't use either (unless you know the brands reputation is solid and you truly trust them).
    Especially if its gelled up inside the vial! THROW IT AWAY!
    I'm not 100% sure with cyp, but crashing wouldn't cause it to gel up, heating a crashed vial is fine to do if it is actually indeed just crashed .
    This could have been caused by bad raw materials. If bad raw powders are mixed with oil it could gel up, I have read that sometimes these raws are cut with polymers and I'm not saying it is but, if that's the case, i would steer clear of any more products from this lab.
    I'm not meaning to knock a brand but just giving my .02 on the info you gave.
    Sometimes life can be a bitch, that's why I take a step back, re-evaluate, move forward, and always look toward "The Future".

  12. #12
    Registered User


    Join Date
    Mar 2006
    Posts
    52
    Rep Points
    358498

    I didn't get the gel thing but then he said it looked like a paste. I can't say for certain based on his description. The OP says he has a pic that is waiting to be approved. It will be easy to tell by seeing a pic as long as the pic isn't a complete blurr...agreed? You've seen crashed gear before, yes?

    Quote Originally Posted by "TheFuture" View Post
    If it were me I would scrap the vial and not use the brand again. Even though one vial looks ok and one doesn't, I wouldn't use either (unless you know the brands reputation is solid and you truly trust them).
    Especially if its gelled up inside the vial! THROW IT AWAY!
    I'm not 100% sure with cyp, but crashing wouldn't cause it to gel up, heating a crashed vial is fine to do if it is actually indeed just crashed .
    This could have been caused by bad raw materials. If bad raw powders are mixed with oil it could gel up, I have read that sometimes these raws are cut with polymers and I'm not saying it is but, if that's the case, i would steer clear of any more products from this lab.
    I'm not meaning to knock a brand but just giving my .02 on the info you gave.

  13. #13
    Registered User


    Join Date
    Oct 2011
    Gender
    Male
    Location
    Persevering to Succeed
    Posts
    380
    Rep Points
    9971446

    Quote Originally Posted by biggerben69 View Post
    I didn't get the gel thing but then he said it looked like a paste. I can't say for certain based on his description. The OP says he has a pic that is waiting to be approved. It will be easy to tell by seeing a pic as long as the pic isn't a complete blurr...agreed? You've seen crashed gear before, yes?

    Yes, and if the picture is clear enough you should be able to tell whether its crashed or bad. If its just cloudy it might be ok to heat up and use. But the thing that worried me was the fact that he said it was gelled up. Guess we'll wait and see if he can post a few pics.
    Sometimes life can be a bitch, that's why I take a step back, re-evaluate, move forward, and always look toward "The Future".

  14. #14
    DRSE
    SUPER MODERATOR
    dieseljimmy's Avatar


    Join Date
    Oct 2011
    Gender
    Male
    Location
    chicagoland
    Posts
    6,931
    Rep Points
    2147483647

    guys I have brewed my own shit for years... like already mentioned prices now make it hardly worth brewing yourself... anyways, I have never seen crashed gear gel up... crashed gear looks like glass shards floating in product or settled at the bottom...usually a result of a unbalanced ba/bs/oil/product ratios...

    this is coming from a dude who has been doing this for years(and have made every possible mistake) DO NOT inject anything into your body without a reasonable asurrance you know what the product is. You have common sense and if your think "hey wait a minute, something is wrong" your most likely right...

    I know how tight money can be, how upsetting it can be to fuck up your cycle or timing, and I know how much it hurts to throw away product. but dont risk your health for a bottle of test... and be very very careful with anything coming out of china...

  15. #15
    Registered User


    Join Date
    Mar 2011
    Gender
    Male
    Location
    USA
    Posts
    516
    Rep Points
    21156996

    More info can be found here:

    http://www.ironmagazineforums.com/pa...cyp-250-a.html

    Refer to post # 24

  16. #16
    Registered User
    bulldogz's Avatar


    Join Date
    Nov 2010
    Gender
    Male
    Location
    Right Here
    Posts
    1,790
    Rep Points
    112842786

    Is the gear from a sponsor?
    ~bulldogz~

  17. #17
    Registered User


    Join Date
    Mar 2012
    Gender
    Male
    Location
    usa
    Posts
    13
    Rep Points
    10

    oki heated it up an the vial looks just fine now. im pretty sure it crashed cause now it looks exactly how it should. thanks again for the information everybody. and no it was not from a sponsor.

  18. #18
    Registered User


    Join Date
    Feb 2011
    Gender
    Male
    Location
    Whitby, Ontario, Canada
    Posts
    37
    Rep Points
    2147602

    Mine crashed, it was from Tiger Steroid or legend pharmaceutical...white substance at bottom of vial clumped together I shook one up and it had floaters, injected fine. Will try the warm water.

  19. #19
    Head Pooh Bear
    Big Puppy's Avatar


    Join Date
    Apr 2012
    Gender
    Male
    Location
    Uzbekistan
    Posts
    490
    Rep Points
    181464256

    My Watson cyp is gelled up

  20. #20
    Member
    BOARD REP
    rclabwholesale's Avatar


    Join Date
    Mar 2014
    Gender
    Male
    Location
    USA
    Posts
    272
    Rep Points
    14222315

    cyp has a tendancy to crash, if you have used the lab before with no problems then i wouldnt be afraid to use.. the bottle has only crashed.. heat up a small cup of water in microwave. then take the cup out and put the bottle in it for about 5 mins occasionally swirling the solution until all the crystals have re suspended themselves... this is a common thing especially with cyp. you should be good to go after that ... there is a chance it may crash again if the amount of solvent used in production is off

  21. #21
    Registered User
    Lost Grizzly's Avatar


    Join Date
    Jan 2006
    Location
    Near Food
    Posts
    317
    Rep Points
    15908374

    Quote Originally Posted by Big Puppy View Post
    My Watson cyp is gelled up
    My very first bottle of Watson Test C crashed yesterday or maybe a few weeks ago. Hard to tell with out looking at in very close and in the light. Mine looked like spiderwebs in the form of a rats nest. I did some quick internet searching and found the answer as stated above. I put mine in a small pan with water about 1/3 of the way up the bottle. Heated the water to a slight boil and removed the pan from the heat. Within a min after removing it from the heat it was clear again.

    I got my Watson from CVS so it can happen to any brand.

  22. #22
    Registered User


    Join Date
    Feb 2014
    Gender
    Male
    Location
    United States of America
    Posts
    30
    Rep Points
    6872546

    I had some tren that did the same. heated it up and was good.

  23. #23
    Super Moderator
    SUPER MODERATOR
    Mudge's Avatar


    Join Date
    Jun 2002
    Gender
    Male
    Location
    Bay Area
    Posts
    24,484
    Rep Points
    121800058

    This was an old thread, but I've had cypionate, propionate and tren enanthate that have crashed. Reheating will do the trick, obviously you don't want something so hot it damages your plunger, or cooks your insides. :-D

  24. #24
    Crimson Rep
    BOARD REP
    jay_steel's Avatar


    Join Date
    Oct 2011
    Gender
    Male
    Location
    CA
    Posts
    3,825
    Rep Points
    602230632

    it also depends on the oil as well. Research your gear guys and talk to the sources. I have ran gear with MCT oil and if it cools barely it turns into something like butter. But it reconstructs just from body temp only because its the properties of the oil and not the gear. There can be tons of variables but in the future even though this is old. Post pics with no lables of the bottles.

  25. #25
    Moderator
    MODERATOR
    blergs.'s Avatar


    Join Date
    Jul 2010
    Gender
    Male
    Location
    E.U.
    Posts
    2,719
    Rep Points
    213458404

    Iv had it happen before and was fine. need to know your lab though.

    An AWESOME Place for HARD CORE REAL Bodybuilding Supplements:


    Save an additional 15% with code: blergs15

    Need the "REAL STUFF" ? NO B.S. Here, Only QUALITY:

    Also save an extra 10% with code: blergs10

Similar Threads

  1. Replies: 8
    Last Post: 02-27-2012, 09:09 PM
  2. question on 230mg/ml test e &110mg/ml test prop blend
    By ROCK STEADY in forum Anabolic Zone
    Replies: 8
    Last Post: 02-01-2012, 02:58 PM
  3. 18 Years Old Blood Test (RESULTS) LH,Prolactin,Test
    By BigBuck in forum Anabolic Zone
    Replies: 21
    Last Post: 12-05-2011, 05:59 PM
  4. Test E VS Test Prop First Cycle benefits?? Guidance needed
    By ragingbulldog in forum Anabolic Zone
    Replies: 9
    Last Post: 06-30-2011, 12:25 AM
  5. New HGH blood test could hurt urine test research
    By Prince in forum Bodybuilding Gossip
    Replies: 0
    Last Post: 07-10-2010, 11:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
-->