• 🛑Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community! 💪
  • 🔥Check Out Muscle Gelz HEAL® - A Topical Peptide Repair Formula with BPC-157 & TB-500! 🏥

Capping orals a pictoral guide!

brundel

brundel

Registered
Joined
Aug 22, 2008
Messages
2,602
Reaction score
414
Points
0
Location
Pedal to the metal
IML Gear Cream!
This guide to manufacturing your own capsules is brought to you by Black Lion Research.
blacklion728.jpg


Here we will make caps with 100mg active ingredient each.
Ill give you a supply list and show you how to use a hand capsule press.
In addition Ill show you how to use geometric dilution to measure and mix your ingredients properly. Failure to do this can result in severe dosage issues.
Some caps will have 100 mg...some 2mg some 500mg unless geometric dilution is employed.
Lets get started.
 
Supplies needed:

Active ingredient 40g
filler ingredient 180g
Capping machine *
Mortar and pestle
400 gelatin caps-empty size -00-
Digital scale

* you will more than likely be using a 25 or 50 cap machine. Simply adjust accordingly.
Each -00- cap will hold roughly 550mg of a dense powder. In this case we needed 220grams for 400 caps. You can estimate the total volume needed by hand filling one capsule, pouring out the contents and weighing it. From there multiply that number x the number of caps in your machine.

======================

FILLING THE MACHINE WITH CAPS

Attach the fill tray to the bottom portion of the machine. This is where the larger half of the caps go.

1-1_zpsf2a85a6f.jpg


Then pour in bottoms, cover the space on the bottom right with the pal of your hand and shake. The caps will fall into place.
2-1_zps5118800e.jpg
 
Last edited:
WEIGHING AND MIXING

Geometric dilution. In order to be certain our active ingredient is evenly distributed throughout the mixture and to ensure consistent dosing in every capsule, geometric dilution must be employed. Watch this short video explaining and demonstrating geometric dilution.

video


40g active ingredient:
6_zps413e3746.jpg


Equal amount filler:
7_zps02404cc0.jpg


I always go just a hair over in weight. I always did this with my gear and I pass on this rule of thumb to my supplements. Black Lion Products are ALWAYS just a tad overdosed.


As seen in the video youll use a mortar and pestle to mix equal amounts of active and filler.
8_zps80bd227f.jpg


Here is the final mix after performing geometric dilution.
9_zpsf0463de2.jpg
 
Last edited:
FILLING THE CAPS

Attach the rim guide.
Pour the mixed powder onto the tray. This is the same technique for every cap machine 15 cap and 600 cap.
20130118_141809_zps28dd12cd.jpg


Spread the powder out and fill the cap evenly.
20130118_141843_zpsba040f76.jpg


Use the tamp to pack the capsules.
20130118_141913_zpsae0d8916.jpg
 
PRESSING THE CAPS


Once the caps are evenly filled.
20130118_142114_zps429d215b.jpg


Press the portion with the tops onto the bottom portion and apply pressure. You will then have this:
20130118_142233_zps16a1e523.jpg


And we are finished. Dump them into a bin for counting and dispensing.
20130118_142326_zps307a5f78.jpg


And we are done ;)
20130118_142326_zps307a5f78.jpg
 
Nice work!
 
Great post. Should be helpful to those thinking about buying bulk powders or bulk supplements.
 
Hey brundel. Im stuck. I got the caps size 0 cap machine and tengrams of cialis powder. They are usudd ally 20mg caps. I didnt know if i had to dilute and i defenitely didnt yeild 500. caps. Are these things overdosed? They arre pretty powerful. My dick is a machine rigjt
 
This is by far the best example of capping I have seen illistrated.Thank you very much
 
IML Gear Cream!
First rate as usual thanks!
 
great idea of posting pics. makes it very easy
 
Hey bud,

thank you for the great post. How much did the capping station cost you if you don't mind me asking?
 
Good info
 
You must log in or register to reply here.
Back
Top