• 🛑Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community! 💪
  • 💪Muscle Gelz® 30% Off Easter Sale👉www.musclegelz.com Coupon code: EASTER30🐰

Pharmaceutical Grade PROOF - GMP Lab - HPLC - SIMEC

Status
Not open for further replies.

Steroidify

Board Rep
Joined
Aug 13, 2014
Messages
179
Reaction score
3
Points
18
Location
http://steroidify.com
IML Gear Cream!
We'll continue sending our samples to an independent GMP certified lab Simec to test our products regularly! Both raws and final products!

As we advertise on several other boards, we also pay for each blood test, labmax or chromotography made by our customers, if they share it online. We can send you cash or you can have the expense covered as store credit.

In fact we are doing this only for you, our potential customers, to provide reliable and verifiable results! We have our internal tests and chromotography, but we prefer an objective result for a maximum of transparency.

From now we are going to provide you all results! Regularly and independent on good or bad they are! If Simec shows that raws are bad you will see it as well!

A while ago we have already sent into an independent GMP certified lab Simec 20 samples of raws which we use in our products. All raws were chosen from a new batch, which we received from our supplier. We have not performed our own testing of these raws yet. So in fact we did not know which exactly results to expect. However we just knew that results will be good in any case, cause we use one and the same supplier within all the time and never changed it. Except a couple of specific compounds.

Several days ago we received the first result namely nandrolone decanoate. We ordered test of purity! Qualitative analysis, not quantitative as Anaboliclab performed with our oxandrolone a while ago. Which result is also perfect by the way. Exact 10 mg as manifested. Back to our qualitative analysis. Y

HPLC RESULT PERFORMED BY AN INDEPENDENT GMP CERTIFIED LAB SIMEC SHOWED PURITY 100.7%!!!

fbHGaFxy.png


For those who don't trust this result or think that we could've changed it, please address Simec, provide them individual number of the essay and they'll confirm it!

Here you find contact data of Simec:
Company

Don`t hesitate to contact them by email or phone and ask for confirmation if you have any doubts!

You for sure ask yourself how 100.7% purity is possible?

It is due to the testing technology. Simec is puchasing a reference sample. This is a certified sample of a reference drug. In other words this is the ideal compound, pharma grade purity.
By the way such a sample costs 100 EUR because of certification, etc. And we paid them additionally to get a proper reliable result. After testing this sample by HPLC Simec tested also our sample and compared. Based on comparison is calculated the purity of a drug, how good or bad it is. Reference sample is an ideal drug.

Our sample is by 0.7% purer as certified reference sample! I specially asked Simec about what does it mean and they confirmed it!

Official reply from Simec specialist:

A content of 100.7% means, that in relation to the reference substance your sample is a bit more pure (this is not a very strange thing, it happens, depends also on water content of the substances which can vary within a percent, maybe more).
So a content of 100.7% means, that perhaps your sample is very dry (water content less 0.1%), on the other hand the reference standard may contain some tenths of a percent of water. And because the reference standard is named as 100%, the sample is above 100%.
It is not explicit purity - because there may be some impurities which can not be detected with this HPLC-method. It means extended work with determination of linearity, accuracy, recovery, robustness, range, repeatability, precision etc.
Such validations have to be performed for each product separately. Costs for one validation are between 7000 and 15000 EUR (sometimes more, depends very much on the method and sample)

But it is most likely your sample is very pure, a content of >100% really is a very very good result.


As you see this is not explicit pureness. This is pureness based on comparison with a reference drug. Important is that this reference drug is also used to check for quality pharmaceutical grade products. The reference sample itself is it. Here is what Simec employee said about it:

The reference standard we use is a official certified standard substance, so we can be quite sure, that no relevant impurities are present. Results are calculated with this official standard substance, so there is no doubt that result of content is valid. With a content of 100.7% it is almost evident that there are no impurities in significant amounts.

Nevertheless we cannot make a statement about purity so easy. The content of the sample we determine with an HPLC method which is usable for this substance. But there may be impurities, which cannot be detected with this special method. To be 100% sure, we would have to know all possible impurities and test each of them separately, in worst case each of them with a separate analytical method. There is no global method which can detect all substances at all. And testing for unknown impurities is extremely expensive and time consuming (surely some thousands of EUR or USD).
 
Last edited:
Last results from Simec, more to follow:

testosterone propionate - 100.1%

hqRuq119.png


Boldenone (EQ) - 102.7 %

5JfRbtm5.png


Testosterone Decanoate - 98.9%

ir3OLbdN.png
 
Pharmacom Labs PHARMA Tren H100 Lab Test Results

Pharmacom Labs Tren H100 is presented in a 10-milliliter multidose vial and reportedly contains 100 milligrams of trenbolone hexahydrobenzylcarbonate per milliliter according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of February 1, 2016 and March 15, 2016.
The samples were forwarded and received by the analytical laboratory SIMEC AG on March 24, 2016. SIMEC performed HPLC-UV quantitative dosage testing, total aerobial microbiological count (TAMC) testing and total yeast and mold count (TYMC) testing. The report was completed on May 27, 2016.
The product was identified with code number ?604331? and the expiration date of March 2017. The quality code ?25a7j3exuu? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.
Label claim: Pharmacom Labs Tren H100 has a label claim of 100 mg/ml trenbolone hexahydrobenzylcarbonate .
Actual content: Pharmacom Labs Tren H100 was determined to have actual content of 94.8 mg/ml trenbolone hexahydrobenzylcarbonate.
No microbiological contamination was detected.
Discuss the Pharmacom Labs Tren H100 lab test results on the AnabolicLab Forum.
(The following images are photographs of the actual product that was submitted for testing.)


D8l2kBoz.png
 
This time a purity report of our Tren-H raws, sample sent by us to Simec before starting the manufacturing process.
The result from above is from AnabolicLab, concentration of final product.

gCSI3ab1.png
 
Pharmacom Labs PHARMA Nan D300 Lab Test Results

Pharmacom Labs PHARMA Nan D300 is presented in a 10-milliliter multidose vial and reportedly contains 300 milligrams of nandrolone decanoate (aka Deca Durabolin) per milliliter according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of February 1, 2016 and March 15, 2016.
The samples were forwarded and received by the analytical laboratory SIMEC AG on March 24, 2016. SIMEC performed HPLC-UV quantitative dosage testing, total aerobial microbiological count (TAMC) testing and total yeast and mold count (TYMC) testing. The report was completed on April 22, 2016.
The product was identified with code number ?604331? and the expiration date of March 2017. The quality code ?1r2ghr8kwz? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.
Label claim: Pharmacom Labs PHARMA Nan D300 has a label claim of 300 mg/ml nandrolone decanoate .
Actual content: Pharmacom Labs PHARMA Nan D300 was determined to have actual content of 308.2 mg/ml nandrolone decanoate.

No microbiological contamination was detected.

pharmacom-pharma-nan-d300-09-300x225.jpg
pharmacom-pharma-nan-d300-05-300x225.jpg

6a7480d07ad54f85d150ae973dd25489.jpg
 
Pharmacom Labs PHARMA Bold 300 Lab Test Results

Pharmacom Labs PHARMA Bold 300 is presented in a 10-milliliter multidose vial and reportedly contains 300 milligrams of boldenone undecylenate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of August 1, 2016 and September 15, 2016.
The samples were forwarded and received by the analytical laboratory SIMEC AG on September 29, 2016. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing. The report was completed on October 31, 2016.


The product was identified with code number ?604331? and the expiration date of July 2017. The quality code ?a8wm70jc2d? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.


Label claim: Pharmacom Labs PHARMA Bold 300 has a label claim of 300 mg/ml boldenone undecylenate.


Actual content: Pharmacom Labs PHARMA Bold 300 was determined to have an actual content of 314.4 mg/ml boldenone undecylenate.


No microbiological contamination was detected.
pharmacom-pharma-bold-300-lab-report-2016-10-31.jpg




(The following images are photographs of the actual product that was submitted for testing.)

pharmacom-pharma-bold-300-05-300x169.jpg
pharmacom-pharma-bold-300-07-300x169.jpg
pharmacom-pharma-bold-300-08-300x169.jpg
pharmacom-pharma-bold-300-12-300x169.jpg
 
IML Gear Cream!
Pharmacom Labs PHARMA Prim 100 is presented in a 10-milliliter multidose vial and reportedly contains 100 milligrams of methenolone enanthate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of August 1, 2016 and September 15, 2016.


The samples were forwarded and received by the analytical laboratory SIMEC AG on September 29, 2016. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing. The report was completed on November 17, 2016.


The product was identified with code number ?604331? and an expiration date of June 2017. The quality code ?6z8yan9a2l? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.


Label claim: Pharmacom Labs PHARMA Prim 100 has a label claim of 100 mg/ml methenolone enanthate.


Actual content: Pharmacom Labs PHARMA Prim 100 was determined to have an actual content of 101.3 mg/ml methenolone enanthate.


No microbiological contamination was detected.
pharmacom-pharma-prim-100-lab-report-2016-11-17.jpg



(The following images are photographs of the actual product that was submitted for testing.)
pharmacom-labs-pharma-prim-100-03-300x169.jpg
pharmacom-labs-pharma-prim-100-10-300x169.jpg
 
Most recent lab results:


Simec AG - www.simec.ch is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.


Each report has an individual number and all results are verifiable. E.g. if you would like to verify this TEST-P lab test, contact Simec AG and and request an authenticity check for the report C55119. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.


more results on: http://pharmacomstore.ws/labtests/




 
100.7 percent.

Lol. Damn . I got bigger just reading that
 
- EXEMESTANE + LETROZOLE + PRIMOBOLAN 200mg - New reports released.

Some reports may have +/-10% deviations ...they are normal and considered as a pass.

Simec AG - www.simec.ch - is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.


Each report has an individual number and all results are verifiable. E.g. if you would like to verify these lab results, contact Simec AG and and request an authenticity check for the report C55108. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.





 
August 4, 2017 By Anabolic Lab:


Pharmacom Labs PHARMA Bold 500 Lab Test Results

Pharmacom Labs PHARMA Bold 500 is presented in a 10-milliliter multidose vial and reportedly contains 500 milligrams of boldenone undecylenate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of May 15, 2017 and June 23, 2017.


The samples were forwarded and received by the analytical laboratory SIMEC AG on June 23, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing. The report was completed on July 24, 2017.


The product was identified with code number ?604331? and an expiration date of July 2017. The quality code ?czurnd4izs? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.
Label claim: Pharmacom Labs PHARMA Bold 500 has a label claim of 500 mg/ml boldenone undecylenate.


Actual content: Pharmacom Labs PHARMA Bold 500 was determined to have an actual content of 581.2 mg/ml boldenone undecylenate.

No microbiological contamination was detected.



Discuss the Pharmacom Labs PHARMA Bold 500 lab test results on the AnabolicLab Forum.


(The following images are photographs of the actual product that was submitted for testing.)




 
[h=1]Pharmacom PHARMA Stan 50 Lab Test Results[/h] Pharmacom Labs PHARMA Stan 50 is presented in a ten-milliliter multi-dose vial and reportedly contains 50 milligrams of stanozolol per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.


The samples were forwarded and received by the analytical laboratory SIMEC AG on August 14, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing. The report was completed on September 18, 2017.


The product was identified with a product number ?604331?, an expiration date of June 2017. The verification code ?4i0tkxim0s? was successfully used to verify the authenticity of the product on pharmacomlabs.com/code.
Label claim: Pharmacom Labs PHARMA Stan 50 has a label claim of 50 mg/ml stanozolol.


Actual content: Pharmacom Labs PHARMA Stan 50 was determined to have an actual content of 56.5 mg/ml stanozolol.
No microbiological contamination was detected.



Discuss the Pharmacom Labs PHARMA Stan 50 lab test results on the AnabolicLab Forum.


(The following images are photographs of the actual product that was submitted for testing.)


pharmacom-pharma-stan-50-winstrol-lab-report-c60243.jpg
 
Latest SIMEC reports - More results at: http://pharmacomstore.ws/labtests/









Simec AG [web] is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.

Each report has an individual number and all results are verifiable. E.g. if you would like to verify this TEST-E 300 lab test, contact Simec AG and and request an authenticity check for the report C64442. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.


http://www.simec.ch/en/kontakt-us.html








 
Pharmacom Labs Pharma Mix 3 Lab Test Results

Pharmacom Labs Pharma Mix 3 is presented in a ten-milliliter multi-dose vial and reportedly contains the following three steroid compounds: 200 milligrams of testosterone enanthate, 200 milligrams of nandrolone decanoate and 100 milligrams of trenbolone enanthate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of October 15, 2017 and December 1, 2017.
The samples were forwarded and received by the analytical laboratory SIMEC AG on December 1, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing. The report was completed on January 16, 2018.
The product was identified with a product number ?604331? and an expiration date of June 2020.


Label claim: Pharmacom Labs Pharma Mix 3 has a label claim of 200 mg/ml testosterone enanthate, 200 mg/ml nandrolone decanoate and 100 mg/ml trenbolone enanthate.


Actual content: Pharmacom Labs Pharma Mix 3 was determined to have an actual content of 206.9 mg/ml testosterone enanthate, 250.0 mg/ml nandrolone decanoate and 99.6 mg/ml trenbolone enanthate..



No microbiological contamination was detected.



Discuss the Pharmacom Labs Pharma Mix 3 lab test results on the AnabolicLab Forum.


(The following images are photographs of the actual product that was submitted for testing.)

pharmacom-labs-pharma-mix-3-06-300x225.jpg
pharmacom-labs-pharma-mix-3-07-300x225.jpg

pharmacom-labs-pharma-mix-3-09-300x225.jpg
pharmacom-labs-pharma-mix-3-10-300x225.jpg

pharmacom-pharma-mix-3-lab-report-c64175.jpg
 
Pharmacom Labs PHARMA Sust 250 is presented in a box containing ten 1-milliliter ammpules. Each ampule reportedly contains 250 milligrams of a blend of four testosterone esters per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing on March 9, 2018. The report was completed on March 27, 2018.
The product was identified with batch number of PHSU00001TA, a manufacture date of September 2016 and an expiration date of September 2020. The product code 7Lbhg9zXsK was verified as an authentic product at pharmacomlabs.com/code.


Label claim: Pharmacom Labs PHARMA Sust 250 has a label claim of 30 mg/ml testosterone propionate, 60 mg/ml testosterone phenylpropionate, 60 mg/ml testosterone isocaproate and 100 mg/ml testosterone decanoate.


Actual content: Pharmacom Labs PHARMA Sust 250 was determined to have an actual content of 31.0 mg/ml testosterone propionate, 61.0 mg/ml testosterone phenylpropionate, 61.7 mg/ml testosterone isocaproate and 99.9 mg/ml testosterone decanoate.



No microbiological contamination was detected.



Discuss the Pharmacom Labs PHARMA Sust 250 lab test results on the AnabolicLab Forum.


(The following images are photographs of the actual product that was submitted for testing.)

pharmacom-labs-pharma-sust-250-01-300x225.jpg
pharmacom-labs-pharma-sust-250-02-300x225.jpg


pharmacom-labs-pharma-sust-250-03-300x225.jpg
pharmacom-labs-pharma-sust-250-04-300x225.jpg


pharmacom-labs-sust-250-lab-report-c67096.jpg
 
Hello Guys ,

Starting today we'll be adding lab tests for different products provided by all our current partners in this thread ....We'll be adding lab tests made to those products starting a few years ago because we want our customers to see clearly that the quality of the products that we sell is well established on the market and it was constant over the years.

Even though Pharmacom Labs products are not available anymore in our store we still sell only top quality products so we are still your trusted source for anything you need in this market.We have an impeccable reputation to keep up with and we cannot sell anything of lower quality than our previous and current standards.

Stay tuned.

Thank you
 
Dragon Pharma Oxymetholon Lab Test Results

Dragon Pharma Oxymetholon is presented in a 100-tablet pouch and reportedly contains 50 milligrams of oxymetholone per tablet according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG for HPLC-UV testing on August 14, 2017. The quantitative dosage test report was completed on September 28, 2017.
The product was identified with a lot number of ?DPOXY-1701? and an expiration date of January 2020.


Label claim: Dragon Pharma Oxymetholon has a label claim of 50 mg oxymetholone per tablet.

Actual content: Dragon Pharma Oxymetholon was determined to have actual content of 48.3 mg oxymetholone per tablet.


Discuss the Dragon Pharma Oxymetholon lab test results on the AnabolicLab Forum.

dragon-pharma-oxymetholon-01-300x169.jpg
dragon-pharma-oxymetholon-02-300x169.jpg


full
 
Dragon Pharma Anavar Lab Test Results

Dragon Pharma Anavar is presented in a 100-tablet pouch and reportedly contains 10 milligrams of oxandrolone per tablet according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG for HPLC-UV testing on August 14, 2017. The quantitative dosage test report was completed on September 25, 2017.

The product was identified with a lot number of ?DPAN-1705? and an expiration date of May 2020.

Label claim: Dragon Pharma Anavar has a label claim of 10 mg oxandrolone per tablet.

Actual content: Dragon Pharma Anavar was determined to have actual content of 12.1 mg oxandrolone per tablet.

Discuss the Dragon Pharma Anavar lab test results on the AnabolicLab Forum.

dragon-pharma-anavar-01-300x169.jpg
dragon-pharma-anavar-04-300x169.jpg


dragon-pharma-anavar-lab-report-c60251.jpg
 
ParaPharma Susta 350 Lab Test Results

ParaPharma Susta 350 is presented in a 10-milliliter multidose vial and reportedly contains 350 milligrams of a blend of three testosterone esters per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ?total aerobial microbiological count? (TAMC) testing and ?total yeast and mold count? (TYMC) testing on March 9, 2018. The report was completed on March 27, 2018.

The product was identified with batch number of PARA002 and an expiration date of August 2022.

Label claim: ParaPharma Susta 350 has a label claim of 200 mg/ml testosterone enanthate, 100 mg/ml testosterone cypionate and 50 mg/ml testosterone propionate.

Actual content: ParaPharma Susta 350 was determined to have an actual content of 192.0 mg/ml testosterone enanthate, 112.1 mg/ml testosterone cypionate and 58.2 mg/ml testosterone propionate.

No microbiological contamination was detected.

Discuss the ParaPharma Susta 350 lab test results on the AnabolicLab Forum.

More lab tests can be seen on our website , LAB TEST section.

parapharm-susta-350-01-300x225.jpg
parapharm-susta-350-02-300x225.jpg


parapharm-susta-350-03-300x225.jpg
parapharm-susta-350-04-300x225.jpg


parapharma-susta-350-lab-report-c67087.jpg
 
Alpha Pharma Oxanabol Lab Test Results

Alpha Pharma Oxanabol is presented in a 50 tablet box with 5 blister packs of 10 tablets each. Each tablet reportedly contains 10 milligrams of oxandrolone according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of October 15, 2017 and December 1, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG on December 1, 2017. SIMEC performed HPLC-UV quantitative dosage testing. The report was completed on March 13 2018.

The product was identified with a manufacture date of October 2016, an expiration date of September 2019, a batch number as OX16004, the serial number as HSBC1N859F and the authentication code as D5sbdpkbh. The authenticity of the product was verified using the ?Check Alpha? Android app.

Label claim: Alpha Pharma Oxanabol has a label claim of 10 mg/tablet oxandrolone.

Actual content: Alpha Pharma Oxanabol was determined to have actual content of 10.3 mg/tablet oxandrolone.

Discuss the Alpha Pharma Oxanabol lab test results on the AnabolicLab Forum.

More lab tests can be found on our website ,LAB TEST section .

alpha-pharma-oxanabol-01-300x225.jpg
alpha-pharma-oxanabol-08-300x225.jpg


alpha-pharma-oxanabol-10-300x225.jpg
alpha-pharma-oxanabol-15-300x225.jpg


alpha-pharma-oxanabol-lab-report-c64171.jpg
 
Status
Not open for further replies.
Back
Top