Thread: Weird gear crash

Never got zzz test cyp.but I'm on sandoz cyp from cvs pharmacy and that never happened to mine .I'm sure z will pop in and leave a comment.is your milligrams 200 or 250 milligrams ?sometimes you might get crystals at the bottom of your bottle so just shake it .just keep it in room temperature outer direct sunlight.but then again I'm sure you know this.try to keep the bottle in your room at 68 to 77 'f

It's 250mg/ml

Hey- I have a boat load of this from Z and have never seen this ? Maybe something in shipping ? I can tell you that all of his oils ( Zline-Euro-intl-Dom) are absolutely awesome and potent to say the least. I also have cyp from many other places including pharm watson and teva. I have never seen this- so haven't a clue on what to say. I would pobably heat it with water and pin it.Maybe somebody will know- I sure don't ( sorry)

Originally Posted by ordawg1

I would pobably heat it with water and pin it.Maybe somebody will know- I sure don't ( sorry)

Oh ya, I absolutely melted it back into suspension and pinned it. I'm just wondering what is up? Trying to learn as much as possible, ya know?

Originally Posted by G3

Oh ya, I absolutely melted it back into suspension and pinned it. I'm just wondering what is up? Trying to learn as much as possible, ya know?

You bet- I am wanting to know also. At least we know it was still gtg and didn't kill you (LOL) you are still with us ? JK

Strange I dont know Test to be cloudy at room temp, crashed? even stranger.

Just my .02

P.S. currently awaiting my Test E from the Uncle.

Originally Posted by G3

Oh ya, I absolutely melted it back into suspension and pinned it. I'm just wondering what is up? Trying to learn as much as possible, ya know?

if it has Crystal floating you may want to place ur gear in boiling water with a needle in the topper of the vial to vent boil for a few min should come back into suspension.

This is odd - I have run a ton of Z line test cyp international and haven't seen this - I'm in Florida so it's never been cold as far as I know...

It seems like I've heard of this a long time ago but I forget whet the outcome was?

The one I heard of wasn't Z's test - and it might not have even been test for that matter.

I'm sure Z will catch this and be able to tell you what to do?

@ G3 - don't worry - your not being disrespectful what so ever - it's actually very nice to see someone have a concern and approach it with this much maturity - I'm sure Z will appreciate your respectful way of handling this.

Originally Posted by Repo

This is odd - I have run a ton of Z line test cyp international and haven't seen this - I'm in Florida so it's never been cold as far as I know...

It seems like I've heard of this a long time ago but I forget whet the outcome was?

The one I heard of wasn't Z's test - and it might not have even been test for that matter.

I'm sure Z will catch this and be able to tell you what to do?

@ G3 - don't worry - your not being disrespectful what so ever - it's actually very nice to see someone have a concern and approach it with this much maturity - I'm sure Z will appreciate your respectful way of handling this.

I also am glad to see how he posted info. Not like some guy complaining because he filled his paperwork out wrong and his order didn't go through. This was a very legit post. We will await and see what the Big Z has to say-Thanks

Hi
it may happen when you keep gear in cold place (like fridge) or when it's very
cold in your state and gear can crash even before it gets to you

Best way is to put it in oven and set it for 250 F and keep it there for 15 min (BUT WATCH IT ALL THE TIME)

Anyway I'll PM you and we'll sort it out - trust me you'll be happy

z.

Originally Posted by Darkcity

if it has Crystal floating you may want to place ur gear in boiling water with a needle in the topper of the vial to vent boil for a few min should come back into suspension.

to be clear DO NOT PLACE IT BOILING WATER ON THE BURNER!!!
bring the water to a boil then remove it from hot burner before placeing it in ther and yes with the vent needle in it and make sur the water isnt so full that the vial starts to float around and tip over. take out after 15 min and let it cool at room temp slowly, should be g2g. i at times will put my gear in the fridg to make it crash to see if its real gear. and then have to warm it back up like this. Now the good new is its real gear!!!! ok now for bad news, wen doing this make sure everything is steryl and super clean cause of house hold bacteria's that can contaminate the gear and can cause infections from within the body.
good luck

Originally Posted by littlemon

to be clear DO NOT PLACE IT BOILING WATER ON THE BURNER!!!
bring the water to a boil then remove it from hot burner before placeing it in ther and yes with the vent needle in it and make sur the water isnt so full that the vial starts to float around and tip over. take out after 15 min and let it cool at room temp slowly, should be g2g. i at times will put my gear in the fridg to make it crash to see if its real gear. and then have to warm it back up like this. Now the good new is its real gear!!!! ok now for bad news, wen doing this make sure everything is steryl and super clean cause of house hold bacteria's that can contaminate the gear and can cause infections from within the body.
good luck

Very solid advice. Whenever I am handling my gear-I wash EVERYHING with achohol and make absolutely sure the sufaces I am working around are clean. I have never placed my gear in the fridge- so is nice to know-Thanks littlemon

Ya guys, I got it to go back into suspension just by using hot tap water in a glass and then putting the vial in the glass for about 3 minutes. I've had gear crash before but it was cold out. It was MUCH colder here 3 weeks ago when I got the gear and it was fine. Strange. I just went down and checked and it has crashed out some again. It's about 45-50 degrees where I store it. All the other gear EQ-NPP- other vial of TestCyp are normal looking. Thanks for all the kind words, guys. So everyone knows, Z has Pm'd me and is offering to sort things out.

Originally Posted by G3

Ya guys, I got it to go back into suspension just by using hot tap water in a glass and then putting the vial in the glass for about 3 minutes. I've had gear crash before but it was cold out. It was MUCH colder here 3 weeks ago when I got the gear and it was fine. Strange. I just went down and checked and it has crashed out some again. It's about 45-50 degrees where I store it. All the other gear EQ-NPP- other vial of TestCyp are normal looking. Thanks for all the kind words, guys. So everyone knows, Z has Pm'd me and is offering to sort things out.

That is good news- that is what happens when we all communicate !! Is also what is great about the Z Board- guys try to help each other which is a good thing. Also - very positive when you have a source that takes care of things. Thanks for keeping us posted

Originally Posted by Uncle Z.

Hi
it may happen when you keep gear in cold place (like fridge) or when it's very
cold in your state and gear can crash even before it gets to you

Best way is to put it in oven and set it for 250 F and keep it there for 15 min (BUT WATCH IT ALL THE TIME)

Anyway I'll PM you and we'll sort it out - trust me you'll be happy

z.

also, put a pin in it to relieve the pressure!!

Still has me scratching my head... could the bottle of Test in question have more gear per ml than the one that didnt crash causing it to come out of suspension at a higher temp ?

-Scagnetti

Originally Posted by SCAGNETTI

Still has me scratching my head... could the bottle of Test in question have more gear per ml than the one that didnt crash causing it to come out of suspension at a higher temp ?

-Scagnetti

Me too. If it had crashed when I first got it, I would understand but not when the weather warms up.