• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

HCG injection swapping needles

easymoney11

Registered
Joined
May 15, 2011
Messages
18
Reaction score
3
Points
0
Location
U
Is there a need to swap needles with the injections? I've wandered this because the needles do not detach
 
Ahh...since you would be using a slin pin you can't swap the needle. I find this to be a dumb question...


Not really a dumb question, you could draw with one syringe and back fill another to pin with. I do that a lot too.. just depends on the situation. Sometimes I'll pre load a few days worth at a time.
 
What's the point? Shoot your hCG with a slin pin. Why not get consistently accurate measurements? I pin like four times a day, only one of which is sub-q. It's no big deal. They don't get dull enough to make a difference with one poke through a stopper on a peptide/GH vial.


BTW, he's talking about hCG, not oil. I totally understand backfilling a slin pin for oil, but not with hCG.
 
What's the point? Shoot your hCG with a slin pin. Why not get consistently accurate measurements? I pin like four times a day, only one of which is sub-q. It's no big deal. They don't get dull enough to make a difference with one poke through a stopper on a peptide/GH vial.


I do it sometimes when my schedule is crazy.. I'll pre load a few pins at a time, rather than draw and pin everytime.
 
I backfill gh peps cause I hit 2 stoppers= DULL!

1 stopper....depends on how cheap I'm feeling lol. Usually just draw and shoot
 
I guess needles just don't bother me. I have punctured up to 4 stoppers with one 31ga needle and shot it with the same one. Hell, I pull my GH out of the vial with those 31s and IV that shit, no swapping or backfilling or whatever.
 
I guess needles just don't bother me. I have punctured up to 4 stoppers with one 31ga needle and shot it with the same one. Hell, I pull my GH out of the vial with those 31s and IV that shit, no swapping or backfilling or whatever.

how?? u fall on to them like a pogo stick lol? After 2 stoppers it seems like it will never pierce the skin.
 
I've pierced 3 and still pin no problems. I pin after 2 ed 3 x a day.
 
What brand of slin pins do you guys have? My monojects will hardly pierce skin after once through a small vial stopper. I don't care that they are dull but shit mine would never go through three and still work lol I'd have to stab with it!
 
What brand of slin pins do you guys have? My monojects will hardly pierce skin after once through a small vial stopper. I don't care that they are dull but shit mine would never go through three and still work lol I'd have to stab with it!

I use Easy Touch Slin Pins.
 
I draw and shoot my hcg with same pin and feel like I have to press hard as fuck to pierce my skin....damn little 5ml vial stoppers dull the shit out of slin pins

Same here.

What brand of slin pins do you guys have? My monojects will hardly pierce skin after once through a small vial stopper. I don't care that they are dull but shit mine would never go through three and still work lol I'd have to stab with it!

bd ultrafine.
 
I draw 1 ml worth of hcg (usually 250iu/10units) and pin with the same needle until it's empty.

As for peptides, I reuse the same pin forever lol, well I would say at least a dozen of times until I feel it's really dull.

Point is, stop worrying about infections etc... Using a new slin pin once is a fucking waste, especially if you gonna pin 2-3 times a day. I have been doing it like this forever, at least pinned myself a few hundreds time, and never an issue.

As for AAS, it's a different subject. I use a fresh needle for every injection.
 
I draw 1 ml worth of hcg (usually 250iu/10units) and pin with the same needle until it's empty.

As for peptides, I reuse the same pin forever lol, well I would say at least a dozen of times until I feel it's really dull.

Point is, stop worrying about infections etc... Using a new slin pin once is a fucking waste, especially if you gonna pin 2-3 times a day. I have been doing it like this forever, at least pinned myself a few hundreds time, and never an issue.

As for AAS, it's a different subject. I use a fresh needle for every injection.

Are you Kidding Me!!! You shouldn't ever ever ever re-use a pin. We are discussing drawing and pinning with the same needle. This is the worst practice I have ever seen anyone post in the open forum, and advise that NO ONE COPY THIS USERS TERRIBLE PROCEDURE.
 
Are you Kidding Me!!! You shouldn't ever ever ever re-use a pin. We are discussing drawing and pinning with the same needle. This is the worst practice I have ever seen anyone post in the open forum, and advise that NO ONE COPY THIS USERS TERRIBLE PROCEDURE.

LOL. Yea make it sound like I committed murder! Dude I am not advising people to copy my way of doing things, but if you think everyone use a fresh slin pin for every hcg/peptide injection, you are in denial.

A lot of people do it like me on other boards and here as well I'm sure, but most won't admit it in the open so they don't get flamed from people like you.

Dude it's 1/10th of a ml of bac water, you think that will make you get an infection if you are using sterile technique?!
 
It has nothing to do with the volume or solution that you are injecting.. You are puncturing your skin with a bacteria ridden needle. It's retarded. Pins are soooo cheap brother. It's not worth risking your health over a few cents.
 
It has nothing to do with the volume or solution that you are injecting.. You are puncturing your skin with a bacteria ridden needle. It's retarded. Pins are soooo cheap brother. It's not worth risking your health over a few cents.

I understand that and I respect your opinion. But for me, the volume and solution makes a difference if you are talking scientifically, that's why we use bac water and not sterile water, cause bacteria won't grow in the solution. And as long as you swab the skin before injecting, you are reducing the chance of contamination.
As for what's under the skin, it's just your own body, the needle won't get bacteria from the fat tissue, cause if there were any, you would have an infection already.

But I agree, FOR ALL READERS, if you want maximum safety and sterility, go with what Pittsburgh63 is suggesting.

I accept that we agree to dissagree :)
 
pins.jpg


I can't imagine what an insulin syringe would look like.
 
It has nothing to do with the volume or solution that you are injecting.. You are puncturing your skin with a bacteria ridden needle. It's retarded. Pins are soooo cheap brother. It's not worth risking your health over a few cents.



x2 so cheap why mess around .....
 
x2 so cheap why mess around .....

Cause to me, it's like the "save a tree" concept. Why throw away 3 syringes a day when I don't have to. Too much waste of plastic. Save a plastic tree people! :roflmao:
 
Cause to me, it's like the "save a tree" concept. Why throw away 3 syringes a day when I don't have to. Too much waste of plastic. Save a plastic tree people! :roflmao:

Lol you can recycle plastic....wood not so much unless you plant another. Did you not see that picture I posted? All those little crevices just invite bacteria, not to mention its dull as shit.
 
The thought just came to my mind and I said it without out a lot of thinking. I was just wandering why they don't make slin pins so you can swap the needles? I thought there might be a reason for this or maybe because you don't have to swap. Its dumb to me to take chances with the an infection and I'm just going to put the hcg into the slin pins plunger from a another needle. Thanks to everybody for the feedback
 
Back
Top