• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

propionyltrenbolone

OverB Could you start a new thread in research / homebrew section post some recipes for Ptren oral solution?
I will later today, after work bro!
 
fuck it im goin for it, overburdened can you PM me the details for making it? also where do i get the glycol and everclear?

Everclear aka grain alky can be had at any decent liquor store. My state only has 151 proof grain alky vs some states it's 192 iirc.

Glycerin can be had a Walmart in the pharmacy area. It's like $4 for 30 ml which is plenty.

Dump 120 mg of p tren into a bottle then dump15 ml (1 tablespoon) of Everclear. Keep swirling and shaking until totally dissolved. Then add 15 ml of glycerin. U can also add a small amount of coolaid for flavor.

Bam. 4 mg/ml suspension in 5 minutes. Shake well before dosing. Use 2mg every 6 hours.
 
Judging by goldenera's post, I assume 151 will work. Ptren doesn't sound like it's particularly difficult to get into solution.
 
^^ 151 will work It just takes a lot more. dissolve the ptren in it first then add glycerin.
 
Everclear is 190 proof. We have it here and its pretty cheap...Rarely a good thing to drink. I dont see why 151 wouldn't work. I've looked into making tinctures and you can extract oils from a plant with less than 151.
 
does the everclear need to be 190 proof or does 151 proof work?

I use 151 proof Everclear. It's all we can get in my state is the 151 proof grain alcohol. It's grain alky it is not 151 rum as some idiots like to argue with me lol.

The 151 is what the above recipe is for I don't see any issue with 191 proof it will just taste worse lol.
 
someone do the math for me, you will be rewarded with my gratitude
 
^^ I made 800mg at 4mg/ml.

had to use 90ml of 151 to dissolve the ptren. then added in glycerin till i reached 200ml.

so for 2g or ptren that would be about 225ml of 151.
 
^^ I made 800mg at 4mg/ml.

had to use 90ml of 151 to dissolve the ptren. then added in glycerin till i reached 200ml.

so for 2g or ptren that would be about 225ml of 151.


and how much glycerin? thank you btw
 
Can this also be made by dissolving it in peg 300?
 
Can this also be made by dissolving it in peg 300?
I would NOT advise dissolving it in PEG 300... pga(either 151 or 190 proof) and glycerin seems to be the most effective way to take it...

BTW, I just added it into my current cycle... and it has offset the lethargy of 200mg ed of drol..(nice side effect!)... This is the first time I've been able to actually use drol since I was 26 years old(every time I've tried, I've had to kick it after 5 days or so cause I'm so tired I can't keep my eyes open!)
 
does the glycerin need to be heated and the powder mixed into it or is this just a cold mix?
 
does the glycerin need to be heated and the powder mixed into it or is this just a cold mix?

It mixes fine cold. dissolve it in the pga first. then add glycerin to your desired total amount and concentration.

I just had to swirl mine a bit, i wouldn't put it in the microwave as glycerin gets retarded hot extremely quickly. Maybe warm a cup of water and place the entire bottle of solution into it,, to help speed the process.
 
does the glycerin need to be heated and the powder mixed into it or is this just a cold mix?

This is all done very easily at room temp... You don't need to heat anything when making oral solutions... You just have to do it in the correct order(pga and raw first, til dissolved.. then add glycerin and shake well...)
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
got mine today and the suspension was fairly easy to make and is VERY stable. I used 30ml 191 proof and 20ml glycerin. Stable at 4mg a ML so my 50ml vials have 100 doses in them. If anyone is interested in trying this stuff out send me a PM.
 
got mine today and the suspension was fairly easy to make and is VERY stable. I used 30ml 191 proof and 20ml glycerin. Stable at 4mg a ML so my 50ml vials have 100 doses in them. If anyone is interested in trying this stuff out send me a PM.

Bro, you are not allowed to advertise steroids for sale, unless you pay, and become a sponsor!!!!
Not only that, but you want people to buy this stuff from you when you don't even know the difference between a solution and a suspension... come on bro.. You are going to get yourself popped for being stupid!
Whether or not there is even ptren in the 'suspension' you so easily made, is beside the point.... You are NOT allowed to sell on this(or most any other board)without becoming a sponsor.... I would rethink what you are doing.... It is NOT something you even have a clue as to what you are getting yourself in to...

Riddler.. you haven't been here long enough to see what happens to people that do what you are doing.. but it's not pretty!!! A guy that decided he was going to make up compounds, and sell them on here... got too deep, and (as far as I can tell) got in over his head, with too many orders, and not enough raws to back the orders up(yet he still took orders, without letting people know he didn't have the product in hand).... He ended up getting his personal info, pics, home address, and everything else posted up on the board(as well as many death threats!).. This isn't something you want to get in the middle of...
 
got mine today and the suspension was fairly easy to make and is VERY stable. I used 30ml 191 proof and 20ml glycerin. Stable at 4mg a ML so my 50ml vials have 100 doses in them. If anyone is interested in trying this stuff out send me a PM.

I hope you're giving it away dick bag!
 
Why are the people on this forum so childish? If your definition of a dick bag is someone who fights for your country and spends time away from his family to go to war to support people like you then I guess I am a dick bag. It just so happens that I am giving it away. I am very dissapointed that people in this country jump so quickly to conclusions and become so negative so quickly without any reason at all. I hope one day you grow up and realize that it is in fact you that is the "dick bag" my friend.
 
Overburdened, I did not realize I advertised that I was selling anything. I said to e-mail me for more information, IE: how to properly secure the materials and mix them. However, you are wrong in the fact that I do not know what I am talking about. A "solution" is the end result of two of more things being permanantly added together while a suspension will eventually seperate over time due to the fact that no permanent bonds were made. When you add altrenagist to pure grain alcohol it can not be reseperated. Even if you were to burn the alcohol off using heat the altrenagist would burn along with it and leave no residue due to it's dp being much lower than the 500* F of the burning PGA. Therefore, this is a solution and not a suspension. I am not an idiot, I am actually a very well educated man that happens to know EXACTLY what he is doing, saying, going and not going to get away with. I would never "sell" steroids over an open forum like you suggest I am doing. I am here purely to educate people on how to make this solution and provide it free for research purposes because I find the compound very interesting and very different from any other trenbolone based products. However, if people like this are the people researching this solution then I don't beleive I even want to supply it.
 
Gentlemen, before this thread turns into a sledging match, please remember the rules :paddle:
 
Overburdened, I did not realize I advertised that I was selling anything. I said to e-mail me for more information, IE: how to properly secure the materials and mix them. However, you are wrong in the fact that I do not know what I am talking about. A "solution" is the end result of two of more things being permanantly added together while a suspension will eventually seperate over time due to the fact that no permanent bonds were made. When you add altrenagist to pure grain alcohol it can not be reseperated. Even if you were to burn the alcohol off using heat the altrenagist would burn along with it and leave no residue due to it's dp being much lower than the 500* F of the burning PGA. Therefore, this is a solution and not a suspension. I am not an idiot, I am actually a very well educated man that happens to know EXACTLY what he is doing, saying, going and not going to get away with. I would never "sell" steroids over an open forum like you suggest I am doing. I am here purely to educate people on how to make this solution and provide it free for research purposes because I find the compound very interesting and very different from any other trenbolone based products. However, if people like this are the people researching this solution then I don't beleive I even want to supply it.

you said 'suspension'.. it is a solution..

It sounded to me, and others, that you were 'selling' this... which is not allowed... if this is not the case, fine.. I was bringing it to your attn that you should not(not to mention , it is against the rules) be selling anything on open forum...

telling someone how to make it in pm is perfectly fine(as far as I'm aware)... I've told people how in PM, myself.. so I hope it isn't against the rules...

It sounded as if you were alluding to 'selling' it, as well as your posts in airsealed2's section sounded the exact same way.... If I am wrong in how I understood that, I'm sorry....
 
fyi ptren is not illegal yet. But after only four days of using this stuff I can honestly say it is "different". It seems to change my physique noticeably every day.
 
fyi ptren is not illegal yet. But after only four days of using this stuff I can honestly say it is "different". It seems to change my physique noticeably every day.

It is illegal bro... and, yes, it is quite noticeable in a very short period of time...
 
FWIW giving steroids/altrenogest is just as illegal as selling them
 
Back
Top