• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

RNM"S Touchdown Thread

Still wanting answers to my questions about the DVDs he sent me......

Also my tracker for my 600ius!
 
He's a fuckin cock sucker..!!

I doubt he'll keep up his end with the dead line heavy spoke about...just my .02
 
I placed an order with RNM in the beginning of October. This is the same story as a lot of you on here. Communication was there in the beginning until he got my $$. I sat back patiently waiting until I saw a bunch of people on here starting to complain. At that point I sent a couple emails with no reply for a couple weeks. I didn't push too hard cause there were a bunch of guys on here saying he was the man and to be patient he would come through. I read a post on here by Raws asking for an email with "late" for the subject line. So i wrote that email. Another week or two goes by with no response then like a miracle he finally emails asking to write back with "outstanding" for the sub-line. Well It's almost two more weeks and no answer to that email. I've kept private up til now following this situation and watching to see some get resolution. Maybe this gets me some resolution too maybe not but I figured after hearing about this "deadline" I had to say something.
 
He has a deadline to fill back orders.

Please post if he has not taken care of you guys


I didn't want to put this out in the open, but I've been pm'ing RAWS about this issue for the past 2 weeks now and it looks as though I'm just going to get the run around on it.

2 out of the 3 vials of EQ I received appear to have crashed before ever even opening or pinning.(Still haven't started my cycle) The reason I say that they appear to have crashed is that they both have a white crystaline milky substance that settles to the bottom of the vial. If I shake them up real well it will mix in, but falls out of the oil and back to the bottom in about a minute or two.

He keeps insisting that there is no way for EQ to crash, because his is made with a liquid and not a powder. So I ask him then what is the substance at the bottom of these two vials. This goes back and forth for several pm's at which point as of yesterday he tells me to reheat the vials in very warm water for about a minute or so.

I sent a pm back asking if there was anyway he would just consider replacing the two vials and to no surprise....I've gotten no response.

I'm not sure what this post will accomplish, if anything, but at least HeavyIron and Prince will know of the issue.
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
I didn't want to put this out in the open, but I've been pm'ing RAWS about this issue for the past 2 weeks now and it looks as though I'm just going to get the run around on it.

2 out of the 3 vials of EQ I received appear to have crashed before ever even opening or pinning.(Still haven't started my cycle) The reason I say that they appear to have crashed is that they both have a white crystaline milky substance that settles to the bottom of the vial. If I shake them up real well it will mix in, but falls out of the oil and back to the bottom in about a minute or two.

He keeps insisting that there is no way for EQ to crash, because his is made with a liquid and not a powder. So I ask him then what is the substance at the bottom of these two vials. This goes back and forth for several pm's at which point as of yesterday he tells me to reheat the vials in very warm water for about a minute or so.

I sent a pm back asking if there was anyway he would just consider replacing the two vials and to no surprise....I've gotten no response.

I'm not sure what this post will accomplish, if anything, but at least HeavyIron and Prince will know of the issue.


I have NEVER had EQ crash. it's a thick liquid at room temp, so I couldn't imagine it turning into white crystals. I would place them in an oven at 250*f for 30 min, let them cool and take another look 3 days later. If it's g2g after than I would say use it, if not I would either heat it and filter it or just chuck it. It doesn't sound like EQ to me. Did it have labels?
 
You won't. If you do get it just remember that is was quickly thrown together so that he could reach a deadline to get back on the board for more cash. I would heat it and refilter it and put it in new vials. Even then you just know it's clean and have no clue what it really is. Good luck brother!
 
I have NEVER had EQ crash. it's a thick liquid at room temp, so I couldn't imagine it turning into white crystals. I would place them in an oven at 250*f for 30 min, let them cool and take another look 3 days later. If it's g2g after than I would say use it, if not I would either heat it and filter it or just chuck it. It doesn't sound like EQ to me. Did it have labels?


Yes...it had labels. They were all 3 labeled Paramount EQ 300. One of them looks perfectly fine, the other two have something that continues to settle to the bottom.
 
I didn't want to put this out in the open, but I've been pm'ing RAWS about this issue for the past 2 weeks now and it looks as though I'm just going to get the run around on it.

2 out of the 3 vials of EQ I received appear to have crashed before ever even opening or pinning.(Still haven't started my cycle) The reason I say that they appear to have crashed is that they both have a white crystaline milky substance that settles to the bottom of the vial. If I shake them up real well it will mix in, but falls out of the oil and back to the bottom in about a minute or two.

He keeps insisting that there is no way for EQ to crash, because his is made with a liquid and not a powder. So I ask him then what is the substance at the bottom of these two vials. This goes back and forth for several pm's at which point as of yesterday he tells me to reheat the vials in very warm water for about a minute or so.

I sent a pm back asking if there was anyway he would just consider replacing the two vials and to no surprise....I've gotten no response.

I'm not sure what this post will accomplish, if anything, but at least HeavyIron and Prince will know of the issue.
Yea bro, eq can't crash. It's A liquid not a powder. Im not sure what that is that's settling at the bottom. I wouldn't pin it tho
 
Yes...it had labels. They were all 3 labeled Paramount EQ 300. One of them looks perfectly fine, the other two have something that continues to settle to the bottom.

Maybe the 2 vials that crashed is not really EQ....just a thought..

I wouldn't trust shit that comes from this fucker now since he does have a deadline to make shit right...
 
Deadline must be approaching quick, and hopefully thats why he's not answering because he's busy trying to make things right...hopefully. I hope you guys get your orders though...
 
That's what I hope and want to believe that he is too busy trying to get stuff straightened up but I do remain optimistic until completely proven wrong it is hard to be patient when you are not getting a response but I will wait and see
 
LOL @ RNM - You idiot, why type out the way you ship your stuff? You think LE dosen't see this board?

LOL @ any idiot who posts "I went to my mailbox...." Fuc$king stupid.

THIS IS HOW PEOPLE GET BUSTED, BY BEING SLOPPY.
 
I just checked my "new" paramount eq and the oil looks fine..... I've never heard of eq crashing.

why dont you post a pic...
 
I just checked my "new" paramount eq and the oil looks fine..... I've never heard of eq crashing.

why dont you post a pic...

I've tried to get a clear picture, but it's hard to with the dark brown vials...I had to hold them to the light just to notice the settling in the first place.
 
Ok...just realized something...I shook all 3 vials vigorously...The one that doesn't settle out I can see clearly through the brown vial. The two that have the white substance I cannot see through the vial at all and are both very cloudy.
 
Eq doesn't crash. Either it's not eq or there's something in there that shouldn't be in there. Either way, I wouldn't pin it
 
I was able to figure something out....turned on the flashlight app on my iPhone and sat the vials on top of the light to shine through the vials...

Here is a pic of the bad EQ
75377-albums380-picture1600.jpg

75377-albums380-picture1600.html


Here is a pic of the good EQ
75377-albums380-picture1601.jpg

75377-albums380-picture1601.html
 
Last edited:
Deadline must be approaching quick, and hopefully thats why he's not answering because he's busy trying to make things right...hopefully. I hope you guys get your orders though...

That's what I hope and want to believe that he is too busy trying to get stuff straightened up but I do remain optimistic until completely proven wrong it is hard to be patient when you are not getting a response but I will wait and see

Get a fuckin clue...he's done this same shit before...disappear and then surface to feed everyone some bullshit line and you guys gobble it up...

This fuck had about a month prior to heavy stepping in to "get caught up" on back orders and issues...think about it...


Coach5...think twice about pinnin that shit...just my .02
 
Back
Top