• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

homebrew powder

FrankJames said:
Okay, so i am hoping a friend of mine has not made a mistake.

He order this filter set up, and also ordered 100 .22 PTFE Filters. The Filters are not sterile. However, the PTFE membrane needs to be pre-wetted prior to use. If they are pre-wet with 70% ethyl alcohol, (which is recommended by the manf.), this would also sterilze the filter, correct?

After seeing so many fairly negative posts about plasticware, my friend thought just going straight to glass would be better.

Thoughts?
Click to expand...
You do understand that your glass set up needs to be sterilized as well right? The only problem with plastic is the fact that it's only good once. If your planning on doing some very high production every week, the steris are fine.
 
can we reuse the receiver or Media Bottles becuse i see the sell BOTTLE TOP FILTER UNITS
 
FrankJames said:
Okay, so i am hoping a friend of mine has not made a mistake.

He order this filter set up, and also ordered 100 .22 PTFE Filters. The Filters are not sterile. However, the PTFE membrane needs to be pre-wetted prior to use. If they are pre-wet with 70% ethyl alcohol, (which is recommended by the manf.), this would also sterilze the filter, correct?

After seeing so many fairly negative posts about plasticware, my friend thought just going straight to glass would be better.

Thoughts?
Click to expand...

from where he got this stuff can plz give link
and how much did that cost
 
My friend got his on Ebay for $150 usd, the seller stated it was the last one. However if you do a google or bing search on "Mobile Phase Filtration Apparatus" you will find a lot of them. 100 PTFE filters cost $45.
 
BigD, my friend does realize that the set up needs to be sterilized before each use. Thanks for the reminder though, we can't be too safe.
My friend is not going to do a lot of high production on a weekly basis, more like turning out a sizable batch as needed, he just wanted to use the best process, figures over time it will be safer and more cost effective.

BTW: is there a reason i cannot quote someone in my replies?
 
ok so like I had mentioned, I tried the tne/dbol at 50/50 and i got it to hold my first try, Im fairly sure with my recipe it will hold at 75/50.
 
BigD4life said:
not sure why you cant quote, If youre on here through a proxi serever like i am it gives you limited use of certain features.
Click to expand...

That could also be the noscript add-on, the proxi shouldn't hinder your options too much, if any at all.
 
BigD4life said:
ok so like I had mentioned, I tried the tne/dbol at 50/50 and i got it to hold my first try, Im fairly sure with my recipe it will hold at 75/50.
Click to expand...

Great news BigD!! The 75/50 sounds like a nice blend!!
 
My homebrew prop (100mg/ml) is crippling. I used 2%BA/20%BB and the rest GSO. The strange thing is I've been using prop from a UGL that claims it doesn't use ethyl oleate an its been totally painless.

At any rate I bought some EO. Should I use 50/50 GSO/EO or straight EO?
 
dwmer said:
My homebrew prop (100mg/ml) is crippling. I used 2%BA/20%BB and the rest GSO. The strange thing is I've been using prop from a UGL that claims it doesn't use ethyl oleate an its been totally painless.

At any rate I bought some EO. Should I use 50/50 GSO/EO or straight EO?
Click to expand...



Try adding around 5% GU and cutting back on the BB a bit. I personally would do EO/GSO for smoothness, cost, and lower toxicity. EO is pretty nasty stuff. Pharma companies have adopted using it, but from what I've read they aren't using it in solutions that have an every/every other day pin.

So if you will be running it ED for months, the safest bet is EO/GSO.
 
dwmer said:
My homebrew prop (100mg/ml) is crippling. I used 2%BA/20%BB and the rest GSO. The strange thing is I've been using prop from a UGL that claims it doesn't use ethyl oleate an its been totally painless.

At any rate I bought some EO. Should I use 50/50 GSO/EO or straight EO?
Click to expand...
you dont need eo or guaiacol or any of that for prop bro, 2% ba 18-20% bb will do it, you dont need anything else. You dont to only use EO unless you have to, some ppl have bad reactions to it,
gl
 
BigD4life said:
you dont need eo or guaiacol or any of that for prop bro, 2% ba 18-20% bb will do it, you dont need anything else. You dont to only use EO unless you have to, some ppl have bad reactions to it,
gl
Click to expand...

He could be one of those that has gnarly reactions to prop. I figured the GU would help ease it. I have a buddy who's glutes can take 3cc's prop with no issues, then he pins lats, and explains it as though he slipped a disk, and then was shot... (he has been shot in combat, so he knows the feeling). He brewed up using a bit GU, and it helped ease the pain quite a bit. If it is only for personal use, and he doesn't react to EO, he doesn't need to worry to much about it. Yet You are right. It doesn't NEED anything else.
 
anxious1 said:
He could be one of those that has gnarly reactions to prop. I figured the GU would help ease it. I have a buddy who's glutes can take 3cc's prop with no issues, then he pins lats, and explains it as though he slipped a disk, and then was shot... (he has been shot in combat, so he knows the feeling). He brewed up using a bit GU, and it helped ease the pain quite a bit. If it is only for personal use, and he doesn't react to EO, he doesn't need to worry to much about it. Yet You are right. It doesn't NEED anything else.
Click to expand...
ah, I see what you were talking about, yea some ppl have a hard time with prop

gl
 
BigD4life said:
ah, I see what you were talking about, yea some ppl have a hard time with prop

gl
Click to expand...

If he is saying his prop is debilitating, I can only assume he is sensitive to it. or has a low pain threshold. :hmmm:
 
Prop hurts for most.
For some its crippling.
Some people are mildly allergic to the prop ester and as a result the normally tolerable post injection pain becomes intolerable. Comperable to suspension on the pain scale.
My old training partner would literally hobble around like frankenstein for days after a prop shot.
I can shoot 400mg of cyp in his leg and hes fine.

You may want to switch esters. BEsides you gotta shoot alot more prop ml for ml.
I would rather have 250mg/ml than 100mg/ml.
Unless your competing prop is a poor choice in my opinion and I use to be a big fan.

You get with prop:
more pain
more overall volume of injection
more overall injections #
wider blood hormone swings even with eod injects.
Test flu for some.

Cyp you get:
none of those.
 
man ive been running prop only and yes, im getting sick of it!!! and im def not in any compitions..lol It doesnt hurt one bit(the hormone or ester) but yeah pringles B!!!!!!!!!!!lol I go through about 5 or 6 layers of scar tissue!!!!!!! to get to where i need to be! cyp is sounding a lot better... i like prop because it is fast acting, but thats the only thing i like better.. halfway through a cycle and im ready for cyp..lol
 
I know prop is faster in.....but its also gone faster.
You get a spike in test levels within like 12 hours with cyp and it drops slower. This is why total blood hormone levels get ALOT higher with cyp, because they compound and multiple are releasing at once.

I use to be prop only.
Now Im cyp only. If your gonna run 1g test that means 5x 200mg or 2ml shots of prop a week or 4x250 or 1ml ---or 2x 500mg or 2ml per week. I like eod 250mg sustained elevated blood hormone levels that remain stable throughout the cycle.
 
some ppl will just run it on the front end of the cycle along with a longer ester like enan or cyp. Im use to short esters ed tho, tne is my mothers milk lol my tne is very, very smooth. The cc at 100 mg i did today was the smoothest injection of it i have ever done. I think i have perfected the recipe. I didnt feel it going in and nothing at all a far as pain now. Funny tho coz to me prop will hurt me more than tne:hmmm:
 
which test is more pure test e or test cyp i herd test cyp is more pure
guys what you recommend
 
GT 500 said:
which test is more pure test e or test cyp i herd test cyp is more pure
guys what you recommend
Click to expand...
its not a matter of purity its a matter of ester length. They are only a molecule apart, If i recal correctly enan is 7 and cyp is 8. It may be 6 and 7 tho. Im sure brundel would know.

gl
 
pure??? u will get more hormone from one than the other, but thats just due to the ester wieght???
 
anxious1 said:
Try adding around 5% GU and cutting back on the BB a bit. I personally would do EO/GSO for smoothness, cost, and lower toxicity. EO is pretty nasty stuff. Pharma companies have adopted using it, but from what I've read they aren't using it in solutions that have an every/every other day pin.

So if you will be running it ED for months, the safest bet is EO/GSO.
Click to expand...

BA and BB are also not meant for ed injections like this community uses them - they *can* be toxic at the levels we use them. I don't think any studies have been done on the toxicity of EO long term, certainly none have been done on guaiacol. I'm of the opinion that guaiacol is nastier stuff than EO.

EO with prop is especially beneficial in terms of pain because the EO will actually cause the prop to release slower into the body (it will raise its half life). It prevents crystallization within the body which is causing you the pain.
 
UA_Iron said:
BA and BB are also not meant for ed injections like this community uses them - they *can* be toxic at the levels we use them. I don't think any studies have been done on the toxicity of EO long term, certainly none have been done on guaiacol. I'm of the opinion that guaiacol is nastier stuff than EO.

EO with prop is especially beneficial in terms of pain because the EO will actually cause the prop to release slower into the body (it will raise its half life). It prevents crystallization within the body which is causing you the pain.
Click to expand...

shit, good info UA...... Interesting about eo and the slower release of the hormone!!!
 
the way the manufacturer
because lot of people received weird test e powder comper to cyp
friend of mine received green test e
what i mant purty of the powder
 
GT 500 said:
the way the manufacturer
because lot of people received weird test e powder comper to cyp
friend of mine received green test e
what i mant purty of the powder
Click to expand...
green test e? waw, lol i would discontinue biz with anyone who sent me green test e. How was the end product?
gl
 
gear that uses grape seed oil as a carrier can have a green hue to it.... that is fine... how green is it!!!???lol
 
You must log in or register to reply here.

Similar threads

1
Homebrew Help!
Replies
1
Views
689
Multislacking
Multislacking
Arnold
Oils, Solubilizers and Bacteriostatics Used to Make Steroid Homebrew Preparations
Replies
0
Views
4K
Arnold
Arnold
Arnold
Simple Formulas for Making Injectable Homebrew Anabolic Steroid Preparations
Replies
0
Views
5K
Arnold
Arnold
Back
Top