homebrew powder

[JSwole]

Ok.....I just got 100grams of sustanon powder from a good friend of ours!!!!
and yes the esters are already combined. Just don't haves recipe, don't wanna fuck it up. I would think in I use the cypionate recipe then u Wong have a problem. But I'm not sure so......

 

[bulldogz]

Hmm. please keep us posted.

Oxygenated is not a bad thing - What do you think occupies the dead space in the vial/container the guaiacol is in?

So the company rep finally got back to me

The rep told me...all their guaiacol they have in stock does have a change in color to it and that is how they received it from the supplier...

I guess this is ok to brew with, but I'm kinda having my doubts about it..

 

[SloppyJ]

Ok.....I just got 100grams of sustanon powder from a good friend of ours!!!!
and yes the esters are already combined. Just don't haves recipe, don't wanna fuck it up. I would think in I use the cypionate recipe then u Wong have a problem. But I'm not sure so......

You're gonna need the ratio of the raw's to figure out what it contains.

 

[anxious1]

Ok.....I just got 100grams of sustanon powder from a good friend of ours!!!!
and yes the esters are already combined. Just don't haves recipe, don't wanna fuck it up. I would think in I use the cypionate recipe then u Wong have a problem. But I'm not sure so......

Here is what I would do just to be safe with brewing the first small batch... Go with 20%BB, 5%GU, 2% BA... That should hold no problem. Then on the next batch cut back the GU a bit. The less chems the better for most. But if you are worried about it not holding or wasting raws then just play it safe and use a tad more.

 

[anxious1]

So the company rep finally got back to me

The rep told me...all their guaiacol they have in stock does have a change in color to it and that is how they received it from the supplier...

I guess this is ok to brew with, but I'm kinda having my doubts about it..

That is a legit company brother. They aren't going to risk sending out oodles of GU that is bad. I am sure they did the same thing you are doing now and checked with their supplier. You could always order more and hope for some new stuff.

 

[pieguy]

Just curious, anybody ever make their test prop with half GSO, half EO? Did it reduce the injection pain and PIP considerably? The stuff's pretty pricey so i want to be sure there's a reason for using it.

ED injections of test p left my rat so sore everywhere despite injection rotation like crazy (both delts, both glutes, both quads). Could barely sit down or lay down without feeling pain/discomfort.

 

[anxious1]

Prop is an ester that some people never will respond to well. Other people it doesn't hurt at all. You could try throwing some GU into the brew and that should help keep some pip away if you're just using BB,BA. It stings a bit going in but most of the time it reduces PIP by a good amount.

 

[yerg]

^^^^^^^^^^Yeah it doesnt bother me at all(prop) LOL but this is correct.. man i know guys that get nearly crippled from it..

 

[probuilder]

I brewed some deca and the colour has been dark. Is it normal ? All the deca gears I have seen before were light, like bulldogz's one at #1843 post. Mine looks like the left on the picture.
The "raw" was liquid at room temperature.

 

[yerg]

Yeah that looks fine bro...although ive never had deca liquid at room temp.. waxy and malable yes.. liquid no... Sure its not EQ?????????

 

[SRX]

Yeah that looks fine bro...although ive never had deca liquid at room temp.. waxy and malable yes.. liquid no... Sure its not EQ?????????

I have not seen pic but i last year had my 500g of Test E melt in my car just traveing 1 hour to my friends home to brew. White powder turned Black. We brewed it anyway and the oil was Black. Filter 2xs still balck. We tossed it. I now know what a low melting point Test e has.

 

[yerg]

I have not seen pic but i last year had my 500g of Test E melt in my car just traveing 1 hour to my friends home to brew. White powder turned Black. We brewed it anyway and the oil was Black. Filter 2xs still balck. We tossed it. I now know what a low melting point Test e has.

this is correct and can happen, but he said room temp... what the room temp?? 120 degrees lol........

 

[SRX]

this is correct and can happen, but he said room temp... what the room temp?? 120 degrees lol........

Sorry did not read whole thread. Room tep is EQ not deca. I have a waxey looking deca in my hand now just to view for this thread. My EQ is all liquid.

 

[FordFan]

Your gui is fine bro. Mine is the same. My rats are growing like crazy on the tne w/ gui. I didn't use bb though. I quote shit wrong evertime I use my phone.

So the company rep finally got back to me

The rep told me...all their guaiacol they have in stock does have a change in color to it and that is how they received it from the supplier...

I guess this is ok to brew with, but I'm kinda having my doubts about it..

 

[probuilder]

Yeah that looks fine bro...although ive never had deca liquid at room temp.. waxy and malable yes.. liquid no... Sure its not EQ?????????

Yes I think it should be deca, I have eq and that is liquid too and has much lighter colour.

I hope the source is OK...

 

[booze]

Yes I think it should be deca, I have eq and that is liquid too and has much lighter colour.

I hope the source is OK...

I posted similar a few pages back. My deca arrived liquid and a dark colour. Darker than equipoise. I've searched it a fair bit and its not an isolated incident. I'm going to brew and pin anyway. Pm me your source if u want, prolly the same lol

 

[probuilder]

I posted similar a few pages back. My deca arrived liquid and a dark colour. Darker than equipoise. I've searched it a fair bit and its not an isolated incident. I'm going to brew and pin anyway. Pm me your source if u want, prolly the same lol

Good to know that I am not alone with this, and can share the experiences.

I pm you.

 

[bulldogz]

^^wtf is that...??

That is a legit company brother. They aren't going to risk sending out oodles of GU that is bad. I am sure they did the same thing you are doing now and checked with their supplier. You could always order more and hope for some new stuff.

I kind of figured this and I doubt they would send some messed up guaiacol..

I brewed some deca and the colour has been dark. Is it normal ? All the deca gears I have seen before were light, like bulldogz's one at #1843 post. Mine looks like the left on the picture.
The "raw" was liquid at room temperature.

My deca is a very fine white powder in which I used in that post/brew...it almost looks like tne powder..

Your gui is fine bro. Mine is the same. My rats are growing like crazy on the tne w/ gui. I didn't use bb though. I quote shit wrong evertime I use my phone.

This is def reasurring, since I was having 2nd thoughts about pinning the tne I brewed.

Going forward, I think I will use a less % of guaiacol in my next tne brew...also guaiacol lingers around the room for a while..!

 

[bulldogz]

Your gui is fine bro. Mine is the same. My rats are growing like crazy on the tne w/ gui. I didn't use bb though. I quote shit wrong evertime I use my phone.

Also wanted to ask...
Is/are your brews darker colored cuz of the dark guaiacol, like vial in the pic on the left..?

View attachment 37122

 

[yerg]

^^Nummy

 

[UA_Iron]

Ok.....I just got 100grams of sustanon powder from a good friend of ours!!!!
and yes the esters are already combined. Just don't haves recipe, don't wanna fuck it up. I would think in I use the cypionate recipe then u Wong have a problem. But I'm not sure so......

Are they mixed in the identical ratios to sustanon?

In any case, you don't need the powder information to make your gear...

100g = 400ml @ 250mg/ml

So you can make 400ml

get yourself a 500ml graduated cylinder:
Nalgene® Graduated Cylinder, Polypropylene, 500mL Capacity, 47314 | Lab Safety Supply

3% BA and 15% BB should hold sust just fine.

400ml*(0.03) = 12ml
400ml*(0.15) = 60ml

Put the 100g powder into the beaker, then dump 12ml BA and 60ml BB into your cylinder.

Let that dissolve overnight if it has to.

Fill the rest of the cylinder up to the 400ml mark with carrier oil

Shake it around, let it go into a consistent solution. If it doesnt go into solution, then pour the contents into a beaker and apply heat.

Filter the product.

 

[bulldogz]

^^Nummy

Does this mean yummy or nasty?

 

[FordFan]

Bulldog, mine looks very similar. It's darker than tren. Very orange. You will be fine. Shit is very pungent. You can taste the smell after you pin it. My tne at 15% gui just seemed to release quick. But I would have red welts for about 2-3 days.

I dropped gui % and life is good. Lmk if you need more help.

 

[yerg]

Does this mean yummy or nasty?

It means YUMMY!! lol

 

[bulldogz]

Bulldog, mine looks very similar. It's darker than tren. Very orange. You will be fine. Shit is very pungent. You can taste the smell after you pin it. My tne at 15% gui just seemed to release quick. But I would have red welts for about 2-3 days.

I dropped gui % and life is good. Lmk if you need more help.

Yeah...mine is also like an orange/yellowish color...

This particular brew which is 100mg/ml is at 20% guaiacol...

I might got with somewhere between 10-15% for next time on the guaiacol..

 

[bulldogz]

It means YUMMY!! lol

Apparently I have to spread more rep before hittin you off again..

 

[yerg]

huh? me no undersandy.....

 

[bulldogz]

huh? me no undersandy.....

I tried to give you rep points just now for the yummy post, but I have to spread more before I can give you more reps...

I get you on the rebound bro!

I know..."hittin you off" is ebonics...lol

 

[yerg]

oh i c... np brother... thanks for the almost reps...lol

 

[pieguy]

Anybody ever run into infection troubles using a .45 whatman instead of a .22? .22 takes an eternity (last batch of 50ml took me 2.5 hours) and gets really messy so if I can speed the process up, that'd be awesome.

After some quick research, I learned that staph won't get caught in a .45micron filter meaning infection can be a big problem. boo