homebrew powder

[tyzero89]

Say i was going to make an oral suspension of Var using a 60/40 mixture of Glycerine/Distilled Water....Would you guys also ad in some BA or something at 1% just to keep any bacteria from forming??

 

[anxious1]

Say i was going to make an oral suspension of Var using a 60/40 mixture of Glycerine/Distilled Water....Would you guys also ad in some BA or something at 1% just to keep any bacteria from forming??

It is oral... Sterile isn't really going to happen man. No need for BA. 40% water is a tad high on the water if you want a good hold @ 20-25mg/ml.

 

[FrankJames]

So i made a pretty simple Test Cyp recipe,
5 grams of Test Cyp
1 ml BA
15.25 ml of GSO
Looked good for a while but it crashed. I think i let the BA evaporate to much. My quetion is, should i add extra BA, (.5 ml or so?), after the fact, heat it up and see if it holds?

Any suggestions are welcome.

 

[tyzero89]

It is oral... Sterile isn't really going to happen man. No need for BA. 40% water is a tad high on the water if you want a good hold @ 20-25mg/ml.

Im not really worried about it being sterile. Im just not wanting any mold or anything to grow in the bottles. Last time i made a small bottle at 70/30 and it worked fine so i just figured id see if 60/40 would work but ill stick with the 70/30.

 

[probuilder]

So i made a pretty simple Test Cyp recipe,
5 grams of Test Cyp
1 ml BA
15.25 ml of GSO
Looked good for a while but it crashed. I think i let the BA evaporate to much. My quetion is, should i add extra BA, (.5 ml or so?), after the fact, heat it up and see if it holds?

Any suggestions are welcome.

I think you should add 15-20 % BB ( 3,75 - 5 ml ) to it and it will be fine, won't crash.
I made Test Cyp 200mg/ml with 2% BA and 20% BB. Looks and holds nice.

 

[FrankJames]

I was looking for a recovery method for this one. I added .5ml BA to each Vial and reheated, it seems to be holding for now.

Next time i will add some BB to it and see how it goes.
Thanks!

 

[rick89]

Has anybody made any decent labels for there homebrew?

 

[FrankJames]

Although you will need to dig through the thread, there are some real nice ones shown in here.

 

[FrankJames]

I just got done putting some labels I made on my vials of filtered GSO, I think it looks pretty legit. Overall I made 200cc of EQ, 70cc of Test E and 80cc of test P.

Here you go, they look pretty good to me.

 

[yerg]

Yes they do, but they look very familiar... did u get the template from somewhere?? Or did u design them yourself??

 

[rick89]

They look spot on Frank James

Dont suppose I could drop you a question through email could I bro

 

[FrankJames]

Yerg: They came from an earlier post from this thread, the quote states they are from bccs. He is the one who originally designed these.

rick: sure, but as i said, these originally came from bccs, however, whatever i can do to help a bro'.

 

[rick89]

Yerg: They came from an earlier post from this thread, the quote states they are from bccs. He is the one who originally designed these.

rick: sure, but as i said, these originally came from bccs, however, whatever i can do to help a bro'.

alright bro wont let me PM due to post count could you shoot me your email addy ??

Rick

 

[rick89]

Frank you got email bro

cheers Rick

 

[pieguy]

Anybody have good places to buy EO? Researchsupply kind of expensive but I bet EO is just expensive to manufacture.

 

[anxious1]

I have looked all over for EO... It is expensive everywhere. RS is cheaper than some places... The liter should last you a VERY long time.

 

[anxious1]

So i made a pretty simple Test Cyp recipe,
5 grams of Test Cyp
1 ml BA
15.25 ml of GSO
Looked good for a while but it crashed. I think i let the BA evaporate to much. My quetion is, should i add extra BA, (.5 ml or so?), after the fact, heat it up and see if it holds?

Any suggestions are welcome.

I know this was already addressed, I just want to cover it for others... Test Cyp needs to be brewed with BB for it to hold correctly 100% of the time.

 

[bulldogz]

Anybody have good places to buy EO? Researchsupply kind of expensive but I bet EO is just expensive to manufacture.

Yeah bro...RSL is one stop shopping...you should have jumped on the sale they which ended on the 2nd...

But they are transitioning over to...medical and lab supplies.com and if you register on the new site you will get a 5% discount off your order...I think that discount is still active...

 

[pieguy]

Any way to tell if you're allergic to EO? Like would an injection of straight EO let you know immediately? I'm about to go on a homebrewing spree and don't wanna make a bunch of gear i'm allergic too.

 

[bulldogz]

^^just brew a small batch of something, use 1 gram of raws...maybe tne in oil or some shit...

Maybe 10 or 20ml of it and inject 1ml and see if you have a reaction like swelling, redness or flu like symptoms...not everyone will have the same reaction to EO

 

[jordandiamond]

Cracked Two 150ml Nalgene Filter Bottles At Less Thank 10psi

Last month, I brewed 150ml of Primo -- twice. And both times the nalgene bottom container cracked at under 10psi.

Have I just been lucky? I've probably brewed test and tren a couple dozen times using various .22 filters -- and none cracked. But I put primo in, and bam!

Anyone else crack theirs?

~jc

PS: Yep, I'm posting because the Primo cracked. At about a zillion times more expensive than test, it's murphy's law. I've read about folks who've spilled their filters . . . since they're so light, it's easy to do . . . and I wouldnn't wanna do it with Primo.....



~jo

So my stupid Nalgene collector bottle cracked. I planned on using the 33mm media bottle I had with the filter, but it didn't fit. I used the plastic collector and it cracked at 5-6 psi. What a POS. Good thing it was only a hairline crack. No oil leaked out, but some air bubbles came in due to the vacuum. Funny thing is the oil stopped dripping down when there is no vacuum. But when I disconnect the tubing and pump, the oil started dripping down again and alot faster than when there was vacuum. The heck? I let it sit and filter the rest of my brew. Not sure if I should get another bottle filter (one that fits my media bottle!) and refilter...

 

[Dannie]

Hi guys, I just did my 1st ever home made AAS 40ml of EQ at 250mg/ml Filtered and baked, looks good. Although I need to wait another 4 weeks till I start jabbing it.

I need to homebrew some Test E, Preferably at 300mg/ml or higher without the use of EO as I am allergic to it.

Can you share some good recipes for high concentration Test E ?

 

[anxious1]

Bro, you can go up to 500mg/ml without using EO... Test E is EASY to work with, almost as easy as EQ IMO. Some people don't even use BB for 250mg/ml. I personally would use BB to thin it out since I enjoy small pins. Test E- Just go wit 2% BA and 10%BB with GSO for 300mg/ml. There are so many possible recipes for this, so I just posted one that will be a bit thinner.

 

[UA_Iron]

I have looked all over for EO... It is expensive everywhere. RS is cheaper than some places... The liter should last you a VERY long time.

LeMelange is much cheaper

 

[GT 500]

LeMelange from what i know is not pharmacy grade
some people had bad experience
and it can be from lot of things

 

[GT 500]

any good recipe for test e that is higher than 450mg and without EO
is ther any chart for oil Viscosity or what is the thinst oil

 

[anxious1]

RS's EO looks and feels much better, (I know it isn't pharm grade) however.

 

[UA_Iron]

Please Note: Although all of the solvents and chemicals we sell are all originally USP or NF grade, they are purchased in bulk containers and re-bottled. The re-bottling process takes place in a very clean environment, with the utmost care for maintaining the product's purity. However, since the re-bottling process does not take place in an FDA certified clean room, these products are technically no longer USP or NF grade. However, we guarantee the original potency of all re-bottled products.

that pretty much negates anything about it being USP grade.

You guys ever read the standards and requirements for an FDA clean room?

 

[anxious1]

I agree, and RS says the same thing. I have been in a clean room, and have looked into how they are made/ maintained. (looked into hardware manufacturing) It is insanely expensive, and labor intensive to build, let alone maintain the clean environment. I believe the site also went on to explain that's why USP NF grade is so much more expensive. In my above post I stated I knew how it WASN'T pharm (USP) grade.

 

[Digitalash]

once it's filtered it shouldn't matter a whole lot though whether it's pharm grade right?



Also what concentration of Test E can one go up to without EO and without it being extremely painful?