Has anyone pushed oil thru a 27g .5" pin with a 3cc syringe?

[Dyers Eve]

Ive done plenty of oil injects with a 27g slin pin.
I usually backload them also.
I was thinking about switching to a 3cc syringe and using a 27g .5" leur lock pin instead. (Usually I use 25g 1" pins with these).
I was just wondering if the bigger barrel on the 3cc syringe would make it more difficult when pressing down on the plunger.

 

[FordFan]

I grabbed a box of 27ga x 1 1/2, 3ml. They are ok. I tried to pin my glute with them and watched the needle try to buckle some. That was a no go.

I do pin quads with them, and haven't had any issues. It will take a LONG time to pin 1ml. But, pain is very minimal, similar to slin pin.

 

[Pittsburgh63]

Bigger barrell makes it easier to push IMO.

 

[manickanuck]

i prefer a 23, tried a 25 the other day found it to be shit but the oil i'm using is thick compared to most

 

[bodybuilder13]

25g is good since it forces you to take it slow, less pip but it takes so long. 23g is a happy medium, dont think ill every try 27g.

 

[Dyers Eve]

I grabbed a box of 27ga x 1 1/2, 3ml. They are ok. I tried to pin my glute with them and watched the needle try to buckle some. That was a no go.

I do pin quads with them, and haven't had any issues. It will take a LONG time to pin 1ml. But, pain is very minimal, similar to slin pin.

Wow, I didnt even realize they made 27g 1.5" pins. I would be scared of that breaking.

 

[independent]

Bigger barrell makes it easier to push IMO.

Incorrect, bigger barrel less pressure.

 

[Pittsburgh63]

Incorrect, bigger barrel less pressure.

But they're far easier to handle. Especially if your pushing thick oil.

 

[independent]

But they're far easier to handle. Especially if your pushing thick oil.

My point was if youre using a small gauge needle a small body syringe will push the oil easier.

 

[Pittsburgh63]

My point was if youre using a small gauge needle a small body syringe will push the oil easier.

I absolutely agree... I think the wording in the first post was a little vague.

 

[coolrise]

1cc syringe and 27g needle is the way to go.
either back fill syringe or warm the oil and draw with 22g then switch needle.

 

[Dyers Eve]

Incorrect, bigger barrel less pressure.

My point was if youre using a small gauge needle a small body syringe will push the oil easier.

Yes, this is what I was wondering, and was my concern.
Ive never had a problem pushing oil thru my slin pins, but they only hold 1cc and I was wanting to use more than 1cc on certain injects.
I guess I will just get a few 27g pins and see how it goes. If its too difficult, I will just go back to the 25g pins for the larger syringes.

 

[sugarshane1403]

I have used used 27g 1/2'' 3ml darts with great success. I actually tried a 29g slin pin and the pip was far worse I guess due to the added pressure during injection. All gear as far as carrier oil is 1/3 EO 2/3 GSO that I use. I have had no problem with test cyp and tren ace every other day. Would stick to using 25g though for glutes anything else 27's all the way.

 

[Grozny]

Needle size is about depth and comfort. So long as you have little fat, you could conceivably inject enanthate with an insulin needle. It just takes a REALLY long time to load the syringe and inject. Generally though, this is my advice:

Oils:
Draw into syringe with a 21g needle. Discard needle and replace with a 1" 25g (frozen) needle for injection. Most docs use a 1.5" 22g needle for this, as it is faster and easier.

hCG:
Insulin needle.

 

[rollo1101]

I use 27ga 1/2" 3cc all the time in delts, traps, bis, and tris no problem.

 

[GMO]

I am currently using a 3ml syringe with a 27g 0.5" needle with no issues. My BF% is around 7% though. If it were higher, I would go with a 25g 1" pin.