• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

homebrew powder

What can i say man...this product i really really needed!!! You Did it bro, this is exactly the right stuff!!! Tell me absorption again?? I delete PM's but it seems like you said like 6%, so for every 100 it would be like 6mg or something???
 
and to think i was worried that i was gonna have to buy a bunch of chemicals that smell like absolute crap.
 
So then in theory if u wanted ti say have 300mg in you a week. For say compared to 300mg/ml of test
E. U would have to apply how much if only 6mg is absorbed per 100mg applied
 
A.

So then in theory if u wanted ti say have 300mg in you a week. For say compared to 300mg/ml of test
E. U would have to apply how much if only 6mg is absorbed per 100mg applied
I was wrong, (thank GOD!) i got a pm from brundel, it's got a 10% absorption rate. What i'm doing is injecting an 160mg/TNE shot (i made some 80mg/cc stuff that came out really good) in thigh or delt (have serious problems with high mg in the glute) 20mg/TNE shot in a tri or bi and 100mg TNE get twice a day to give me 200mg/day. If my bi's or tri's are sore i'm gonna do an extra 2 applications of TNE gel. The cool thing is i don't work a regular job and i sit in an air conditioned house all day so if i can't do an injection i can do 5 applications of TNE gel and at least get a half dose that day, hell i can just shave my whole body and put 500mg on myself at a time to give me 50mg. The shit has already made my life a whole lot easier.
NOTE: It does matter what kind of hand sanitizer used. The Germ-X aloe i tried had almost exactly the same stuff but it must have been in different concentrations because it didn't work. The test didn't stay in the solution. It crashed after half an hour. The Natural Concepts holds!
 
Shoot 10%. Not to bad, could be a nice break from shots but sounds like ur not needing that lol!
 
10% is the min expected.
IF you
apply to the right areas
Make sure your skin is clean and moist (right out of the shower is best)
apply another coat of hand sanitizer only after about 20min
you can likely get 20%+
 
A.

O.K. Brundel smashed one out of the park fellas. I got the hand sanitizer he suggested and it was too easy!! I just mixed the TNE,-not supposed to go over 10mg./ml., into the hand sanitizer, while slowly heating and stirring ("don't heat too much because it's the alcohol that's keeping the TNE from crashing and it will evaporate if you do"-Brundel.) once the mixture was homogeneous it kept it's composure and didn't crash. It didn't paste up on me either. It was perfect. Well don't brundel.
Have to edit this:::: I didn't mean 10mg/ml. i meant 100mg/ml it's the absorbtion
rate that i was referring to when i said 10. Brundel said less is more so i'm gonna be making it like 40 or 50mg/ml.....Thought i should correct that.
 
A

So that was 4ml a day if you made it at 50mg/ml?
Yea, to get at least 20mg. But like brundel said if you are thoroughly clean dry and shaved and you do a coat of just the hand sanitizer 20min after you apply the TNE/Naturel Concepts your gonna get a higher absorption than 10%. I have been using it for 3 or 4 daz and i'm DEFINITELY getting at least 10%. yesterday i did 80mg in injection for and then applied 3, 40mg coats (400mg of TNE get) and did the sanitizer application 20min after each and i felt like i did at least 200mg of injection. Trust me there is no placebo effect that's gonna take place with this kind of stuff (TNE). It's out of your system so fast that if you don't dose every 18 hours your gonna feel tired. Not only did i have energy but i had a bit of a CNS boost, so i know i'm getting good absorption.
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
i'm actually gonna start dosing with the gel first thing in the a.m. after i do my shot and then around noon then mid evening. I'm so happy i have this stuff. If your only using TNE it's really a must have. injections are tough with this stuff let me tell you, and talk about running through pins!! I dose every day with my traditional protocol of long and short esters but more often than not if your working with an injection that's over 50mg whether it's 3mls of 25mg/ml or 1.5 mls of 50mg/ml it's easy for the needle to clog so you have to pull it out, unclog it attach another pin and try it again. I have already stuck myself 5 times (that's 5 needles)because the needle kept clogging - and this is with a 23 guage. Hell i have had 21 guage needles clog. immagine doing that 2 times a day. with the gel i only have to pin once a day and i don't have to use as much, so it doesn't clog as easily. Like i said if your only using TNE the stuff is a life saver.
 
I just counted 7 holes in my left bi from 3 days ago. That's just only administration of TNE injection. Don't get me wrong it's not like it happens all the time but when it does your like
"not this again"
 
I just counted 7 holes in my left bi from 3 days ago. That's just only administration of TNE injection. Don't get me wrong it's not like it happens all the time but when it does your like
"not this again"
Ive got so much of that shit its not even funny(androgel) by script. I dont use it. pain in the ass to keep my skinncovered and away from the kids so they dont get any on them over time.......Im glad to see there is a benefit from transdermal,,,,and at 10x stronger maybe it would be worth it. Me id rather just pin, but i can see where you might like the gel cause it sounds like you pin alot more than me!!lol
 
A.

Ive got so much of that shit its not even funny(androgel) by script. I dont use it. pain in the ass to keep my skinncovered and away from the kids so they dont get any on them over time.......Im glad to see there is a benefit from transdermal,,,,and at 10x stronger maybe it would be worth it. Me id rather just pin, but i can see where you might like the gel cause it sounds like you pin alot more than me!!lol
Oh i'm gonna have to pin, there is just no way around it, but i had to have a supplement of some kind, and TD was the only thing i could think of because i don't have the equipment or experience to make lozenges without the right equipment. it was just too much site pain because the size of the injections made it so the next injection site, in order, wouldn't be recovered before it was up again. Since i'm not working outside and it's easy for me to constantly apply it (if i need to because i'm out of pain free injection sites or whatever).

I gotta tell you guys, if i wasn't experienced with using daily injections (TNE being the worst) i would have gone to the emergency room about a week ago. I swear i had an abscess (not an infected one) that was soooo freaking painful that i couldn't even touch my medial glute.
 
alright, so.. i got all my supplies in and am in the middle of my finaplix conversion. Its my first trial and my first kit, so I decided to try the regular method instead of the actual extraction of powder via Methyl Alcohol, per the basskiller website. Anyone know what the probable dose would be since i didnt go with the crystalization method? Im guessing its between 75-90mg/mL . Is it a huge difference in yield if you extract the tren via the crystalization method? Is it worth it?
 
alright, so.. i got all my supplies in and am in the middle of my finaplix conversion. Its my first trial and my first kit, so I decided to try the regular method instead of the actual extraction of powder via Methyl Alcohol, per the basskiller website. Anyone know what the probable dose would be since i didnt go with the crystalization method? Im guessing its between 75-90mg/mL . Is it a huge difference in yield if you extract the tren via the crystalization method? Is it worth it?
All I ever do is the crystal method. YES it is worth it!!!!!!!!!!! I could help you with that method, but not just the pellets and solvent method... sorry
 
I just finished with my first finaplix conversion. I used 1 kit... mixed it with 14.5mL of GS oil, 0.4mL of BA and 3.6mL of BB. this should be 2%:18%. all filtered through a coffee filter and then a .20 whatman. and then filtered 1.5 mL more of the GS oil through the whatman i now have 20mL of Tren A. I bought my oils and solutions from Lemange.com. they seem to have awesome reviews and I know the solution and filtering should sterilize it enough, but im a bit skeptical. To cook or not to cook? I dont want to over oxidize my new gear and reduce my potency but i also dont want to F*&# myself up either. what do you guys think? Should i throw it in the oven or is it G2G? if you guys think i should cook it, then what specs do I heat it to and how long. thanks guys....
 
I just finished with my first finaplix conversion. I used 1 kit... mixed it with 14mL of GS oil, 0.4mL of BA and 3.6mL of BB. this should be 2%:18%. all filtered through a coffee filter and then a .20 whatman. i know have 20mL of Tren A. I bought my oils and solutions from Lemange.com. they seem to have awesome reviews and I know the solution and filtering should sterilize it enough, but im a bit skeptical. To cook or not to cook? I dont want to over oxidize my new gear but i dont want to F*&# myself up either. what do you guys think? Should i throw it in the oven or is it G2G? if you guys think i should cook it, then what specs to I heat to and how long. thanks guys....

I dont ever use the oven and the only time i heat is to help suspend the powder in the solvents. You will be fine. no need to heat again... Ive been pinning my own shit a long time bro. your ok if you used the proper solvents and filtered. Truth be told, i never filter with a .22 um. All I use is .45um some will disagree im sure. Just being honest. never had an infection or anything!!!!!
 
Awesome, thanks Yerg! That eases my mind a little. Being a member of the medical field tends to make me a bit over skeptical when it comes to stuff like this.. lol. I will be trying the crystallization method tomorrow if i can find some methyl alcohol around here. Not too many autozones in Korea. lol
 
alright, so.. i got all my supplies in and am in the middle of my finaplix conversion. Its my first trial and my first kit, so I decided to try the regular method instead of the actual extraction of powder via Methyl Alcohol, per the basskiller website. Anyone know what the probable dose would be since i didnt go with the crystalization method? Im guessing its between 75-90mg/mL . Is it a huge difference in yield if you extract the tren via the crystalization method? Is it worth it?

There is 0 chance your getting 90mg
75mg would be possible but really its gonna be more like 50mg.

The worst part????
You really will never know.
 
A.

There is 0 chance your getting 90mg
75mg would be possible but really its gonna be more like 50mg.

The worst part????
You really will never know.

Yea, it's been said and said again but the people that assume they are getting 75-100mg from the kit method are usually the same ones that say they have to take 150-200mg/day or EOD. The guys who do the crystal fina method do 75-100mg/day. And they KNOW exactly how much they are doing.
 
thanks for the input fellas. Looks like the crystal fina method is the way to go..
 
Has Dora gotten a new email. I emailed her last week and replied again this week only to have my email sent back saying her email no longer existed. Anyone else talked to her recently?
 
She did change it...she sent an email with her new address but I guess only the VIP's got it lol
 
Anyone ever test their HCG by shooting it on a pregnancy test? I know that's what those test are looking for is HCG in the urine...so I wanted play a little joke lol, plus that would be a cheap and easy way to test your supplier...just wondering?
 
If u shoot it directly on the pregnancy test it will show positive?^^^
 
Back
Top