homebrew powder

[TREMBO]

Keith, why did you used 0.9? Some special reason?

 

[keith1569]

a few pages back there was discussion about weights of powders and that is you use .9 it is a good number to use for all powders. When making 100ml the amount displaced between .85 and .9 is minimal but i still go with .9

 

[UA_Iron]

a few pages back there was discussion about weights of powders and that is you use .9 it is a good number to use for all powders. When making 100ml the amount displaced between .85 and .9 is minimal but i still go with .9

thanks for paying attention bro

between .85 and .95 is your range, with .9 being an excellent choice for all compounds which will put very close to accurate dosing.

never, ever, ever should one use anything below .85. Your gear will be underdosed.

 

[Imosted]

Hey got a question to vets on brewing, ok so i have been reading and nobody really mentioned using olive oil for brewing, is there a reason behind this, i was looking at some HG gear, like Sustanon and Primo from Turkey and they use Olive oil.

 

[keith1569]

Olive oil is just thick as hell

Sent from my Samsung Infuse 4G

 

[awhites1]

homebrew powder
HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

 

[TREMBO]

homebrew powder
HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

You mean beverage?

 

[RAWS n More]

I'm going to make an test prop/npp blend. make up 100 ml and see how it goes. 100/100 mg/ml. sounds yummy

 

[maxwkw]

I'm planning on trying my hand at home brewing. I'm going to start with some test prop.

My ultimate goal is to be able to make my own HRT and have

100mg/ml test E
50mg/ml mast E

blend, and dose that at 1ml 2x/week

 

[RAWS n More]

I'm planning on trying my hand at home brewing. I'm going to start with some test prop.

My ultimate goal is to be able to make my own HRT and have

100mg/ml test E
50mg/ml mast E

blend, and dose that at 1ml 2x/week

That is easy as pie brother

 

[booze]

so i made 100mls of test e but ran out of time to filter it all. Half is filtered, half is not but are in separate vials. I baked both vials in the oven. Is it ok for me to filter the unfiltered stuff at later date? I assume it will be. Thanks.
PS some of you have pm'd me. I can reply yet because i dont have enough posts. Sorry.

 

[tyzero89]

Wow this thread is filled with great info. I think im gonna pull the trigger on some powder. Im thinking about brewin up some Test E to start off because it seems pretty basic. My question is, if i were to just do this for personal use, would i need all that fancy set up or could i get away with just using say a 20cc syringe and a filter?

 

[booze]

no need for a fancy set up with small volumes. i tried to do 100mls but ran out of time because it took so fukn long to filter lol
has anybody got some info on using the pump/vacuum method!?! thanks.

 

[tyzero89]

Ya I don't plan on doing more than 50ml at a time. I am so close to ordering. Just a quick questions though...what is the usual amount of time it takes to brew 50ml of test e with a basic setup?

 

[Dannie]

Sorry it it has been asked before.
How should I sterilise the glassware?
Do I need Nylon or PVDF filter to filter the oil (and then the substance) ?
Do I need to 'bake' the final product?

Also Is there a website where homebrew of aas is described, preferably with some kick ass pain free recipes for Bold

 

[TREMBO]

Wow this thread is filled with great info. I think im gonna pull the trigger on some powder. Im thinking about brewin up some Test E to start off because it seems pretty basic. My question is, if i were to just do this for personal use, would i need all that fancy set up or could i get away with just using say a 20cc syringe and a filter?

This is the basic:

Powder
Oil
BA
BB
Filter .22
Sterile vial
Beaker

 

[TREMBO]

no need for a fancy set up with small volumes. i tried to do 100mls but ran out of time because it took so fukn long to filter lol
has anybody got some info on using the pump/vacuum method!?! thanks.

How long did you take to filter up that 50ml?

What filter are you using? .45 or .22?

Did you try to push the syringe attached to the filter while pull the other one, creating a vacuum that facilitate the sucking of the oil to the vial?

 

[TREMBO]

Sorry it it has been asked before.
How should I sterilise the glassware?
Do I need Nylon or PVDF filter to filter the oil (and then the substance) ?
Do I need to 'bake' the final product?

Also Is there a website where homebrew of aas is described, preferably with some kick ass pain free recipes for Bold

1) Usually pple buy the vials already sterilised... I've never brewed yet, but I think that few persons sterilise their beakers in bowling water before mixing.

2) Some people filter the oil before the mix, but it's not necessary. You do need to filter the oil + ba + bb + powder solution before putting in the vial.

3) No

PS. I've never brewed before, all I'm talking about here is from my previous reading (that's serious, I'm not joking or trying to be fake something that I do). Soon I'll be brewing.

 

[Dannie]

Thanks,
& I believe you, seen your post in some RNM thread



What filter do I need?
Nylon or PVDF?

 

[weightslayer]

ALWAYS filter your oil before using....ALWAYS!!!!! you can never be to sterile when it comes to this. and, use already sealed sterile vials, believe me it will save you some infections.

 

[tyzero89]

This is the basic:

Powder
Oil
BA
BB
Filter .22
Sterile vial
Beaker

Ya that's pretty much what I planned on using plus a 20ml syringe. I was gonna follow the basskillers test e conversion guide.

Another question...do I need a lurelock syringe or can I use a lureslip syringe to attach with the filter.

 

[keith1569]

You need luerlock. You may want to get a 10cc syringe to. 20cc is harder to push imo

Sent from my Samsung Infuse 4G

 

[TREMBO]

ALWAYS filter your oil before using....ALWAYS!!!!! you can never be to sterile when it comes to this. and, use already sealed sterile vials, believe me it will save you some infections.

Another good obsevation is to use a .22 filter instead a .45

 

[keith1569]

True. .22 is safer but is quite a buy harder to push oil through. I haven't had any problems using a .45um.
I have used both though.

Sent from my Samsung Infuse 4G

 

[Bigbully100678]

I see no point in filtering twice. In my opinion it is an unnecessary step, particularly if you are filtering into pre-sealed sterile vials. It's not touching the air, it's passing straight through the filter into the closed vial.

 

[tyzero89]

Another good obsevation is to use a .22 filter instead a .45

Ya I planned on getting .22 filters. I don't mind the extra hassle as long as it is filtered good.

 

[TREMBO]

True. .22 is safer but is quite a buy harder to push oil through. I haven't had any problems using a .45um.
I have used both though.

Sent from my Samsung Infuse 4G

Hw long it took when you used a .45 and a .22?

Did you use another needle attached to the vial for depresurizing?

 

[booze]

How long did you take to filter up that 50ml?

What filter are you using? .45 or .22?

Did you try to push the syringe attached to the filter while pull the other one, creating a vacuum that facilitate the sucking of the oil to the vial?

took me forever. i remember the first 30ml took me 1 hour and it was hard work lol so i would say hour and a half for the 50ml. using a .45.

And Im not sure what you mean by pulling the other one?! i just filtered straight into a vial.

Im never using a standard syringe filter again. I need some info on the hand pumps please. Also will my unfiltered gear that i have left over be fine to filter at a later date? Thanks.

 

[booze]

It's real comparable to E, it's a slower ester by about 4 or so days, the E is what I like. But get the millipore set up and filtering with a .22 will be a walk in the park

cutright, are you able to list what is required for the millipore setup? thanks.

 

[keith1569]

Milipore you just need the hand pump and the milipore. Get some large syringes with a bug guage to suck up the oil to be transferred to your sterile vials.

Sent from my Samsung Infuse 4G