Pin size???

[Ronnie81]

Just have a question I'm wanting to know what size pin to be using for quad/delt injections for test prop,tren ace? I heard of people using insulin syringes if you can what size is best in those? Feed back much appreciated thanks.

 

[Santhemum]

I would not try to use a slin pin for the Quad. Use a 23 gauge 1" pin with a 3 cc syringe for the Quad inject.

You can use a 5/8" pin and 3 cc syringe for the delt, or a 5/8" slin pin.

There are 2 issues with a slin pin that make it less attractive. First, it takes a long time to load - you'll have to be patient. Second, you have to use the same pin to load and pin, which dulls the pin. It can be done - I've done many pins with a slin pin.

 

[heckler7]

25g 1 inch

 

[Sherk]

I use a 25g x 1.5 for quads and a 29g x1/2 for delts. The way you load a slin is not the traditional way you'd load a regular 3cc syringe. That would be fucking ridiculous to even attempt lmao. You back load slins. I use slins for every injection I do in the upper body and the other pins for glutes, quads and VG.

 

[Ronnie81]

Alright I think I'm gonna go ahead and pick up some 25g x 1.5's and give them a try I have a lot of 23g's and see what works the best thank you for feed back.

 

[Presser]

I have used 27g all the way up to 31g insulin pins for my quads without any problem. They were all 1/2" length. I have very little BF on them so this works perfectly for me. It is easier loading a 27g though.

 

[jtm]

25g 1 inch

^^^^^^^^ this.......sometimes i will use the 5/8 on the delts

 

[Swfl]

1" 25g on quads

 

[The Prototype]

I use 1", 25 g for delts, quads, VG and glutes. I rarely pin quads anymore. The other 3 are much easier and less painful for me.

 

[Ronnie81]

Yeah was thinking of trying a 27g wasn't sure if I'd have issues with that size though a lot of people suggesting 25g so probably going that way to be safe thank you all for the help deciding really appreciate it.

 

[Big Puppy]

30 gauge 5/16 in the quads

 

[Swfl]

I have used 25g, 27g , 29g 31g all on quads. 31&29g take forever to get the oil in, 27 kinda same boat but work. 5/8"is best depth unless you have tons of fat on quads, most guys don't have that issue... 1" is my max on quads I always have trouble with them very sensitive on me, I either hit a nerve and makes my whole muscle contract or hurts going in, not initial puncture but deeper no clue but I do them dead last and only when everything else hurts like hell. But others love em so hopefully your one of those guys.

 

[Ronnie81]

Never had no quad sensitivity usually besides glutes best spot for me at least. I have only had issues with bumps or swelling pinning my quads since I ran out of my AY gear at that time and decided to use my biotech test cyp I've had saved a few months now don't know if its the gear,pin size I have been using awhile now 23g ,or what that's why before I begin my next cycle wanted to see what pin size would be best for quads running test prop,tren ace,and Masterson prop. I picked up some 25g x 1's today gonna give them a run worst case can always go up or down in gauge pin.

 

[Santhemum]

I only pin my upper body, and i only use 25g 5/8" pins. I pin 6 cc's of gear easily (my GF pins my lats and traps mostly, or I do my pecs).

 

[jay_steel]

i slin pin my quads and chest all day.

but I mostly go...

23 1 1/4 glutes
25 quad if its a big injection
29 Slin quad if its a quick one
29 slin chest
29 slin shoulders

I am pinning 4cc on M W F so I do 3 CC glutes and 1 cc shoulders or chest. giving my quads a break.