• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

UG Gear Problems

R

rongli

Newbie
Joined
Mar 6, 2013
Messages
9
Reaction score
1
Points
0
Location
US
Okay so I placed my order from a highly recommended provider about a month ago. The Test-E was crystallized and the EQ was cloudy. I did lightly heat the Test-E to dissolve the ester back in the oil. It worked, but only temporary and both oils were extremely painful. I have a knot in each cheek. I know UG is a bit different, but it cant be this bad can it??

I've been out of the game for about 8 years and figured I would test out some UG gear first, but damn this makes me want to spend the extra bucks and go back to human grade.
 
rongli said:
Okay so I placed my order from a highly recommended provider about a month ago. The Test-E was crystallized and the EQ was cloudy. I did lightly heat the Test-E to dissolve the ester back in the oil. It worked, but only temporary and both oils were extremely painful. I have a knot in each cheek. I know UG is a bit different, but it cant be this bad can it??

I've been out of the game for about 8 years and figured I would test out some UG gear first, but damn this makes me want to spend the extra bucks and go back to human grade.
Click to expand...

FYI
no users here are dumb enough to buy what your saying with only one post on this forum.
 
WTF would I have to gain from what I said above? Sure I am new to the forum, however all I asked was a simple question about UG gear since I'm not too familiar with it. Is it generally that bad or not? I didn't think you had to be a member of some fucking underground secret society to get competent input on such a simple question.
 
I've gotten gear like that from sponsors here. Just talk to the sponsor and he will replace it. At least in my case they did.
 
sendit08 said:
FYI
no users here are dumb enough to buy what your saying with only one post on this forum.
Click to expand...

Op you have to recognize that there is truth to this statement. Or at least the logic behind it.
i have purchase from several ug vendors here. And I have gotten a bad batch by one lab. It happens. Get your post count up and pm me.
 
I got some vials from a friend of mine at the gym. It was underground lab stuff. The masteron was crystallized. I heated it back into solution but the injections were still very painful.

As far as the cloudy solution, I would draw it out of the vial, heat it, than filter it. Hopefully you can salvage something from it.
 
I also don't see anything wrong with your original post. I don't know why someone would attack you for it.

You are not naming any source and he is not asking for a refund. HG gear is always desired over UG gear.
 
Thanks bro! They did say they would replace. How typical is it to get gear like that? This is not what I have and I know it's still UG, but is BD a decent brand?
 
BD stopped making gear years ago. Chinaman took the name and can be hit or miss.
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
Thanks Kad. It's funny, I placed my first order from that Chinaman over 14 years ago! I did know BD died and he picked it up, but was just curious. I haven't ordered from him in a long time.
 
rongli said:
Okay so I placed my order from a highly recommended provider about a month ago. The Test-E was crystallized and the EQ was cloudy. I did lightly heat the Test-E to dissolve the ester back in the oil. It worked, but only temporary and both oils were extremely painful. I have a knot in each cheek. I know UG is a bit different, but it cant be this bad can it??

I've been out of the game for about 8 years and figured I would test out some UG gear first, but damn this makes me want to spend the extra bucks and go back to human grade.
Click to expand...



but you got it cheap,so you got what you pay man!
 
Get your self some .22 filters and some GSO from walmart and some BB. filter some GSO into the vial about 2ml if the vial will hold it. vent and heat. (thats for the crystalized one). that should get it back into suspension... its too concentrated thats the problem and its crystalizing in your ass or wherever. that sucks, been there... the cloudy gear pull it out of the vial into several syringes filter it back in through the .22 that shoudl take care of it. if they used EO it may be melting the filters and leaving a cloud of melted filter in the vial. Refilter then heat. should be fine. if you do all of that your gonna be out maybe $30 tops with shipping for the supplies. If there sending you replacement gear and you can save this stuff thats twice the cycle!!! Yeah Boy! if it still hurts and the replacement stuff doesn't then toss it.
 
Swfl said:
Get your self some .22 filters and some GSO from walmart and some BB. filter some GSO into the vial about 2ml if the vial will hold it. vent and heat. (thats for the crystalized one). that should get it back into suspension... its too concentrated thats the problem and its crystalizing in your ass or wherever. that sucks, been there... the cloudy gear pull it out of the vial into several syringes filter it back in through the .22 that shoudl take care of it. if they used EO it may be melting the filters and leaving a cloud of melted filter in the vial. Refilter then heat. should be fine. if you do all of that your gonna be out maybe $30 tops with shipping for the supplies. If there sending you replacement gear and you can save this stuff thats twice the cycle!!! Yeah Boy! if it still hurts and the replacement stuff doesn't then toss it.
Click to expand...

If you have to go through all that i think its time for a new source.
 
bigmoe65 said:
But it doesnt hurt and leave a big lump in your ass.
Click to expand...
If it crashes when ur injecting ur goin to have pain and a lump anyways so not sure where ur comment is coming from lol. But ya its common knowledge hg gear is going to be better although there are a ton of ugls that make some damn good gear
 
Swfl said:
Get your self some .22 filters and some GSO from walmart and some BB. filter some GSO into the vial about 2ml if the vial will hold it. vent and heat. (thats for the crystalized one). that should get it back into suspension... its too concentrated thats the problem and its crystalizing in your ass or wherever. that sucks, been there... the cloudy gear pull it out of the vial into several syringes filter it back in through the .22 that shoudl take care of it. if they used EO it may be melting the filters and leaving a cloud of melted filter in the vial. Refilter then heat. should be fine. if you do all of that your gonna be out maybe $30 tops with shipping for the supplies. If there sending you replacement gear and you can save this stuff thats twice the cycle!!! Yeah Boy! if it still hurts and the replacement stuff doesn't then toss it.
Click to expand...

Interesting post bro. I was under the impression cloudy gear was from moisture. I've never heard of the filter melting into the solution. Learned something new. I study, research and preach this stuff daily, nearly all day to the point my wife bitches at me for it and this is the first I've heard of this. Thanks for the new info to look into.
 
Sherk said:
Interesting post bro. I was under the impression cloudy gear was from moisture. I've never heard of the filter melting into the solution. Learned something new. I study, research and preach this stuff daily, nearly all day to the point my wife bitches at me for it and this is the first I've heard of this. Thanks for the new info to look into.
Click to expand...

she's cheating on you bro
 
Yeah if they use EO it can eat through a filter if its not the right type. Had it happen recently. was going 50% EO
 
Swfl said:
Yeah if they use EO it can eat through a filter if its not the right type. Had it happen recently. was going 50% EO
Click to expand...

Damn bro 50%? What temp were you at when it melted?
 
It was hot. It didn't melt the filter visibly. It just made a white haze come out of the filter into the oil

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
 
longworthb said:
If it crashes when ur injecting ur goin to have pain and a lump anyways so not sure where ur comment is coming from lol. But ya its common knowledge hg gear is going to be better although there are a ton of ugls that make some damn good gear
Click to expand...

How many times have you read here about terrible pip from ugl gear vs. Hg gear? Dont you see the trend?
 
FYI, there's no human grade steroids here.
 
You must log in or register to reply here.

Similar threads

C
  • Locked
Napsgear Problems
Replies
10
Views
4K
TwisT
TwisT
Arnold
How Do I Know if My Gear is Fake
Replies
0
Views
1K
Arnold
Arnold
Arnold
4 Ways to tell if you're GEAR is real?
Replies
0
Views
1K
Arnold
Arnold
Back
Top