• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

homebrew powder

Muscle Gelz Transdermals
IronMag Labs Prohormones
I did my first shot of the homebrew last night, 1cc of the test e and 1cc of the EQ in the quad and I can barely feel it this morning. The GP test E that I used last cycle felt like i got hit by a baseball the next morning so this is a great improvement. Each is 2% BA and 20% BB.
 
bccs said:
I did my first shot of the homebrew last night, 1cc of the test e and 1cc of the EQ in the quad and I can barely feel it this morning. The GP test E that I used last cycle felt like i got hit by a baseball the next morning so this is a great improvement. Each is 2% BA and 20% BB.
Click to expand...

Was it the clear stuff? I had some golden GP that wasn't bad. Then i got some clear shit and it fucking hurt.

Yeah the septa tops woulda have been nice. Makes it much easier and sterile. I'm not sure those milipore reciever flasks like the oil. Some dripped on the outside and it kinda etched the bottle. Made me uneasy about leaving it in there for too long.
 
Im running the clearish gp test c and its got some pain to it the day after.

On a side note...im gonna be brewing this weekend!!!!
 
Just opened my package of test e powder. It isn't really a powder but it feels hard....i haven't opened the actual bag but i can break chunks apart. Is this normal or should it be powdery?
 
The Test E I had was about like parafin wax and smelled kinda sweet, like a fruity smell...The EQ on the other hand had more of a body odor smell.
 
It has a weird smell, that's for sure.
 
Update on homebrew test prop.

Painless injection like yerj said, never going to buy UGL test ever knowing this. Shit went in smooth like butter. Next morning my leg is pretty sore, like i just did heavy quad work. I guess this is expected. Did 1.25ml worth at 100mg/ml of sesame oil based 2%/20% prop.

Anybody wanna comment on how long it took for their test prop to kick in?

Also, is the homebrew method used for test prop exactly the same for NPP and Tren Acetate? Those might be my next to raw powder orders. Tren A is expensive as hell though. Jeesus.
 
SloppyJ said:
Was it the clear stuff? I had some golden GP that wasn't bad. Then i got some clear shit and it fucking hurt.

Yeah the septa tops woulda have been nice. Makes it much easier and sterile. I'm not sure those milipore reciever flasks like the oil. Some dripped on the outside and it kinda etched the bottle. Made me uneasy about leaving it in there for too long.
Click to expand...

You can buy the millipore filter without the receiver. Then purchase media bottles that can hold 1000's of MLs. Make sure the neck fits the filter.
THen you can use a septa top. Get glass media bottles, they are a bit more expensive but they are far more durable.
 
bccs said:
The Test E I had was about like parafin wax and smelled kinda sweet, like a fruity smell...The EQ on the other hand had more of a body odor smell.
Click to expand...

I think you have them backwards. I have always heard of test-e having a strong pungent smell, similar to bo. It also melts right around body temperature. So if you rubbed it between your fingers it will melt. I'll check and see what eq's melting point is.
 
pieguy said:
Update on homebrew test prop.

Painless injection like yerj said, never going to buy UGL test ever knowing this. Shit went in smooth like butter. Next morning my leg is pretty sore, like i just did heavy quad work. I guess this is expected. Did 1.25ml worth at 100mg/ml of sesame oil based 2%/20% prop.

Anybody wanna comment on how long it took for their test prop to kick in?

Also, is the homebrew method used for test prop exactly the same for NPP and Tren Acetate? Those might be my next to raw powder orders. Tren A is expensive as hell though. Jeesus.
Click to expand...

You can use the same recipe for NPP and tren A.
There is good reason why people buy fina and recrystallize it...tren is expensive. You should feel the prop pretty quick.....libido will likely go up in a week or so...the rest within 3 I would think.
 
The thing is with the crystallization method, you get maybe 90% conversion so a $40 kit runs you 1.8g of tren. That's 18ml for $40 bucks. If you buy the raw from overseas, you can usually get it overseas for about $150/10g. That's 100ml for $150 so you're payin $1.50/ml vs $2.22/ml. Also saves you the trouble of the time consuming distilled water crystallization.

Thanks for the info brundel
 
pieguy said:
Anybody wanna comment on how long it took for their test prop to kick in?.
Click to expand...

Felt it in 1 week. Kicked in within 2. You'll know if it's good to go soon. :winkfinger:


brundel said:
You can buy the millipore filter without the receiver. Then purchase media bottles that can hold 1000's of MLs. Make sure the neck fits the filter.
THen you can use a septa top. Get glass media bottles, they are a bit more expensive but they are far more durable.
Click to expand...

Yeah I think that's the best route. Those plastic milipore recievers are pretty fragile. They crack very easily. I believe that the milipore uses a 45mm neck correct?
 
so my friend was gonna let me borrow his digital pocket scale this weekend but at the last minute decided to go out of town. Do you think i would be fine just using a regular food scale to brew up 50ml. it only measures in 1g incriments. If anything i would just overdose it slightly just to be sure.....what do you guys think??
 
You overdose a gram of test c powder in a 50ml batch using 2%/10% and you only get to 270mg/ml. No biggie at all. Realistically, i doubt you'd even go a gram over.
 
I went 5% over to cover impurities. And if it's overdosed then that's even better!
 
whats the diffrence between unrefined and refined oil? Which is better for home project?
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
Basically it's filtered or not filtered. Non-filtered will work because you're going to filter it anyway. And it's cheaper.
 
SloppyJ said:
Basically it's filtered or not filtered. Non-filtered will work because you're going to filter it anyway. And it's cheaper.
Click to expand...


Thanks bro
 
So would a 2/18% ba/bb work fine for good ol test e? Im wanting to possibly make it at 300mg/ml if possible. If not i could settle for 250mg
 
i think i found what im looking for. Im just gonna run 250mg/ml at 2%ba and 20%bb
 
Getting ready to do my fist homebrew. Just waiting for the goods to arrive. What % BA/BB should I use for 1-test(dihydroboldenone) cyp? I cant find a reliable recipe anywhere. btw this thread is awesome! I learn something new everytime I read it
 
had a bit of a brew today using PTFE membrane disc filters. I reckon i was getting around 20mls until they were nearly blocked and flow slowed big time. when the flow nearly stopped and filter was blocked, the flask started to leak slowly? i am using a vacuum set up with glassware. is it normal for them to start to leak when the filters become blocked? thanks.
 
I love this thread! Lots of great info. I always did enjoy chemistry-especially my o-chem lab. So thanks to all the bro's who have contributed info.

I'll contribute a little also. I have found this cheap heating block/melting point apparatus since some of you mentioned measuring melting points. It is $30 from here. You will have to buy the thermometer separate. But imagine putting this on a hot plate (preferable) or even the stove-top. And just a pinch of product is all you would need to use with this.

MeltingPointAl_4125-1_M.jpg


For the record, our o-chem lab used a cheap-ass melting-point apparatus. It was basically a light bulb shining on a capillary tube with a thermometer sticking out. Oh and don't forget the cheap magnify glass that completely obscured your view :hmmm:. Point is it would seem easy to do a homemade apparatus. Just suspend a capillary tube (cheap from amazon) over a light bulb and have a thermometer suspended at the same level as the capillary tube and that's it. Easy peasy lemon squeezy.
 
booze said:
same as enth mate.
Making 50mls Test Enanthate With Pictures for starters.
Click to expand...


No, it's not the same as test enanthate. It's 1-test cypionate, not Test cypionate, big difference.

Getting ready to do my fist homebrew. Just waiting for the goods to arrive. What % BA/BB should I use for 1-test(dihydroboldenone) cyp? I cant find a reliable recipe anywhere. btw this thread is awesome! I learn something new everytime I read it
Click to expand...
If you make it at 100mg/ml it might hold. 200mg/ml won't even hold with 100% EO as the carrier oil (so I've read).


Your next step is to use guaiacol, BB, BA and EO to get it all to hold at higher mg.
 
You must log in or register to reply here.

Similar threads

1
Homebrew Help!
Replies
1
Views
689
Multislacking
Multislacking
Arnold
Oils, Solubilizers and Bacteriostatics Used to Make Steroid Homebrew Preparations
Replies
0
Views
4K
Arnold
Arnold
Arnold
Simple Formulas for Making Injectable Homebrew Anabolic Steroid Preparations
Replies
0
Views
5K
Arnold
Arnold
Back
Top