• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

Is my homebrew bunk?

1genius

Amateur Bodybuilder
Registered
Joined
Nov 25, 2011
Messages
35
Reaction score
2
Points
0
Location
USA
How long should I wait before classifying my homebrewbrew as bunk? I did a batch of eq and a batch of test prop. I started 1cc of each in the same pin last night and no post injection pain as of now. I was restless and had weird dreams lastnight and had a mild hardon throughout the night, i noticed because I kept waking up.
 
you dont make any sence....
you took one shot (think) you felt something and you think its bunk because you felt something?
or did you think you where going to wake up jacked? lol
Sorry I just dont understand your comment, doesnt make sence.
what are you expecting from shot? if it makes you sore its real? I sure hope not.
 
LOL soreness isn't a very big indicator whether or not it's real! I've shot 100% bunk prop before, I know this because I got bloods done, and I had had some crazy PIP like you're "supposed" to with real prop. You're not gonna notice a damn thing after one shot anyway. You had a hard on because you were excited to jump back into cycle, my cawk get's hard for tren & test.
 
you dont make any sence....
you took one shot (think) you felt something and you think its bunk because you felt something?
or did you think you where going to wake up jacked? lol
Sorry I just dont understand your comment, doesnt make sence.
what are you expecting from shot? if it makes you sore its real? I sure hope not.


At least a little post injection from the propionate.
 
LOL soreness isn't a very big indicator whether or not it's real! I've shot 100% bunk prop before, I know this because I got bloods done, and I had had some crazy PIP like you're "supposed" to with real prop. You're not gonna notice a damn thing after one shot anyway. You had a hard on because you were excited to jump back into cycle, my cawk get's hard for tren & test.


How long does it take to start feeling the effects of testosterone propionate?
 
How long does it take to start feeling the effects of testosterone propionate?

You brewed your own gear and dont no fucking nodda about shit.. you fucking kidding me bro ?? :jerkit:
I think your full of shit and should do some home work before I put you over my knee and jam a finger in your rectum buddy ! :thinking:
 
You brewed your own gear and dont no fucking nodda about shit.. you fucking kidding me bro ?? :jerkit:
I think your full of shit and should do some home work before I put you over my knee and jam a finger in your rectum buddy ! :thinking:
I was about to say this too, you are homebrewing and dont know how long before it kicks in. this post is suspect.
 
x2 you're already brewing but you don't know how prop works? What are your stats and cycle layout bro?

Anyway you should wait at least 2-3 weeks imo, or pay the $50 for bloodwork and you'll know right away. If you trust your powder source you shouldn't have an issue though. If you have leftover powder try a melting point test.
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
Research longer, and put your dedication towards learning about the compounds you are willing to brew yourself and put into your body. Buying from a source with not much education on the compound is one situation, but brewing it yourself with only a slight knowledge of what you are doing is another. Not very smart on your end. Research until you are 100% comfortable with knowing the compound, and down the road, if you understand how they work, maybe then consider brewing it on your own.
 
x2 you're already brewing but you don't know how prop works? What are your stats and cycle layout bro?

Anyway you should wait at least 2-3 weeks imo, or pay the $50 for bloodwork and you'll know right away. If you trust your powder source you shouldn't have an issue though. If you have leftover powder try a melting point test.



I did two cycles of sustanon within the last year.
First Cycle: 1cc per week=250mg @ 8weeks
Second Cycle: 1cc weeks 1-6/2cc weeks 6-12 Mon & Thurs @ 12 weeks

This cycle:

1cc Eq 200mg/ 1cc Prop 100mg Monday
1cc Eq 200mg/ 1cc Prop 100mg Wednesday
1cc Eq 200mg/ 1cc Prop 100mg Friday @ 16weeks

I usually feel the propionate in sustanon in a few hours or the next day! For some reason i just remember sustanon kickin in faster.


I've been researching for the past year. The only thing i've tried is sust and to tell you the truth I'm satisfied with it, but I placed an order for raws that i couldn't resist. It came at a nice time when I had the money to gamble. I was tired of reading others' experiences and wondering, so I decided to give things a go.
 
Last edited:
tell us EXACTLY how you 'made' the prop and EXACTLY how you made the eq...
and, you felt the placebo effect kick in in a few hours bro.. just like the placebo effect made you wake up several times last night... and, holy shit! a man having a hard on when he woke up?!?!?! MUST be OFF THE HOOK!!!

for real though, tell us exactly how you made it... how many ml of everything you put in it, what order you put it together... how many grams of test... how many grams of eq... and your procedure from start to finish...
there are some things about prop(that I'm sure you are unaware of... or you wouldn't have posted this thread) that we could tell you with pretty good confidence, if it was legit or not...
 
I did two cycles of sustanon within the last year.
First Cycle: 1cc per week=250mg @ 8weeks
Second Cycle: 1cc weeks 1-6/2cc weeks 6-12 Mon & Thurs @ 12 weeks

This cycle:


Not all prop. hurts.Iv had prop that was human and it didnt have any PIP to it.

1cc Eq 200mg/ 1cc Prop 100mg Monday
1cc Eq 200mg/ 1cc Prop 100mg Wednesday
1cc Eq 200mg/ 1cc Prop 100mg Friday @ 16weeks

I usually feel the propionate in sustanon in a few hours or the next day! For some reason i just remember sustanon kickin in faster.


I've been researching for the past year. The only thing i've tried is sust and to tell you the truth I'm satisfied with it, but I placed an order for raws that i couldn't resist. It came at a nice time when I had the money to gamble. I was tired of reading others' experiences and wondering, so I decided to give things a go.


Not all prop. hurts.Iv had prop that was human and it didnt have any PIP to it.
 
This is true, I homebrewed prop at 1.5% ba, 15% bb 60% GSO, 40% EO and theres no pip at all. If you warm it up under hot tap water, it flows through 29g insulin syringes so ED injections are no problem
 
tell us EXACTLY how you 'made' the prop and EXACTLY how you made the eq...
and, you felt the placebo effect kick in in a few hours bro.. just like the placebo effect made you wake up several times last night... and, holy shit! a man having a hard on when he woke up?!?!?! MUST be OFF THE HOOK!!!

for real though, tell us exactly how you made it... how many ml of everything you put in it, what order you put it together... how many grams of test... how many grams of eq... and your procedure from start to finish...
there are some things about prop(that I'm sure you are unaware of... or you wouldn't have posted this thread) that we could tell you with pretty good confidence, if it was legit or not...

First Brew: (On The Hotplate Method)- Also, used were AAS Calculator Calculated Recipes.

Eq: 15g powder

31.80 grapeseed oil
1/2 cc ba
50ml@300

Step 1: Put oil in flask and heat(directly on hotplate)
Step 2: Put powder in a beaker added ba(stirred with glass thermometer), while oil was heating(slightly boiled)
Step 3: Added heated oil to the powder/ba mix(stirred)

Step 4: Heated the combined powder/oil/ba solution close to 220F(stirred)


Prop: 5g powder
39.96 grapeseed oil
5cc bb
1/2cc ba
50ml@100

Step 1: Put oil in flask and heat(directly on hotplate)
Step 2: Put powder in a beaker, added bb then ba(stirred with glass thermometer), while oil was heating(slightly boiled)
Step 3: Added heated oil to the powder/bb/ba mix(stirred)
Step 4: Heated the combined powder/oil/bb/ba solution close to 220F(stirred)



Note: This process took no more than 10min each brew. I used an extra 1/2g for each. I only did three pins, one every other day and there was a strong taste and feel of oil in my mouth.
P.S. I threw this first brew out because I didn't think the brew could be saved!



Second Brew: ( On The Hotplate and Water Boil Method)- Also, used were the Classic Recipes.
Eq: 10g powder

41ml cottonseed oil
1 1/2cc ba
50@200

Step 1: Put oil in beaker, added powder(stirred for 1-2min with a steel digital thermometer)
Step 2: Put the beaker in a pot filled with water slightly above the solution
Step 3: Placed the pot with beaker on hotplate
Step 4: Set hotplate to 5, then stirred with steel thermometer every couple of minutes until the water went down
Step 5: Filled the pot with water again and stirred every couple of minutes until water went down
Step 6:Repeated Step 5
Step 7: Took beaker out of pan, turned down the hotplate to 3 or 2 placed beaker directly on hot plate and stirred ( temp read 356-4??)
Step 8: Took beaker of the hotplate and placed in a 1/2gallon cooler of ice, then covered cooler
Step 9: After 4-5 minutes added ba(stirred)
Step 10: Filtered





Test Prop: 5g powder
36.25 cottonseed oil
7 1/2cc bb
2 1/2cc ba
50@100


Step 1: Put oil in beaker, added bb, then added powder(stirred for 1-2min with a steel digital thermometer)
Step 2: Put the beaker in a pot filled with water slightly above the solution
Step 3: Placed the pot with beaker on hotplate
Step 4: Set hotplate to 5, then stirred with steel thermometer every couple of minutes until the water went down
Step 5: Filled the pot with water again and stirred every couple of minutes until water went down
Step 6:Repeated Step 5
Step 7: Took beaker out of pan, turned down the hotplate to 3 or 2 placed beaker directly on hot plate and stirred ( temp read 356)
Step 8: Took beaker of the hotplate and placed in a 1/2gallon cooler of ice, then covered cooler
Step 9: After 4-5 minutes added ba(stirred)
Step 10: Filtered




Note: This process took 30-45 minutes each brew, I added an extra 2g in each. There is no taste or feel of oil in my mouth.

As of this morning I noticed the prop was more cloudy than yesterday but I shook it up for a while and decided to shoot anyway. I really noticed after this difference after this injection.
 
Last edited:
I never brewed due to hassle so.............................. BUMPPPPP on any feed back on this guys steps?
to me it looks fine, but I know when I am unsure on things and I am unsure right now.
 
I never brewed due to hassle so.............................. BUMPPPPP on any feed back on this guys steps?
to me it looks fine, but I know when I am unsure on things and I am unsure right now.


The second brew is working. I noticed it with the second pin as with the third(yesterday). It's consistent. It took alot of heat and stirring, but it's 100%gtg.
 
I have no idea why you'd feel or taste oil in your mouth bro, sounds like placebo. You shouldn't feel or taste anything really, especially oil since that will definitely be stuck at the point of injection
 
Only time i got that taste was with tren and nicking a vein. Usually followed by tren cough
 
you brewed your own gear and dont no fucking nodda about shit.. You fucking kidding me bro ?? :jerkit:
I think your full of shit and should do some home work before i put you over my knee and jam a finger in your rectum buddy ! :thinking:

lmao!
 
Only time i got that taste was with tren and nicking a vein. Usually followed by tren cough

I've heard of people tasting tren, and test base, I think it's possible especially with shorter esters but you will only taste the hormone and maybeeee some solvents. It's common for IV drug users to taste their drug but thats the chemical itself hitting the bloodstream and coming into contact with taste buds through the many superficial vessels in the mouth. Oil I seriously doubt would transfer to the blood in such a large quantity and if it did it would most likely be dangerous...
 
Your brewing method leaves a lot to be desired I got to the words slightly boiled and didn't really want to read the rest
 
I've heard of people tasting tren, and test base, I think it's possible especially with shorter esters but you will only taste the hormone and maybeeee some solvents. It's common for IV drug users to taste their drug but thats the chemical itself hitting the bloodstream and coming into contact with taste buds through the many superficial vessels in the mouth. Oil I seriously doubt would transfer to the blood in such a large quantity and if it did it would most likely be dangerous...

Hey bro, did you get my pm???
 
Back
Top