• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

Might sound like a noob question but...mixing oils

C

clipse

Registered
Joined
May 22, 2011
Messages
118
Reaction score
8
Points
0
Location
gym
If I were to want to mix test prop and tren ace in the same syringe, how do you go about doing that? Can you only do this with ampules? I don't see how you would pull twice into the same syringe, considering you have to push air into the vial before you pull the oil.
 
clipse said:
If I were to want to mix test prop and tren ace in the same syringe, how do you go about doing that? Can you only do this with ampules? I don't see how you would pull twice into the same syringe, considering you have to push air into the vial before you pull the oil.
Click to expand...

You won't be pushing any air into an ampule since it's not a closed seal. Just draw up both into the same syringe and you'll be juts fine.
 
Ya I mean with vials. I know you can do it with amps, I was wondering if people only mix using amps? Or can it be done with vials?
 
suck up the test as you would and then suck up as much air as your tren you need insert it in your tren vial, puch the air in and suck out you tren...got it :winkfinger:
 
LightBearer said:
I think he's wondering how to do this with vials
Click to expand...

Good point...then again, it's pretty much the same. Inject the amount of air into the 1st vial equal to your dose and then draw. For the 2nd vial, pull back on the plunger equal to the amount of your 2nd dose and insert into the vial and draw. Simply stating...if you are pinning 2ml's total then push 1ml of air into each vial (assuming you have a 3ml plunger). I'm also assuming you can change the needle after filling and before injecting.
 
chucky1 said:
suck up the test as you would and then suck up as much air as your tren you need insert it in your tren vial, puch the air in and suck out you tren...got it :winkfinger:
Click to expand...

thats what i was thinking, but it seems like a kinda haphazard way to do it. Seems like you'd end up pushing some test into your tren vial
 
Fresh needle for each vial, and another before pinning. Just to be safe
 
theCaptn' said:
Fresh needle for each vial, and another before pinning. Just to be safe
Click to expand...

thats not the question

the question is the displacement of air into each vial before pulling. how do you inject air into vial #2 when you already have oil in the syringe?
 
clipse said:
thats what i was thinking, but it seems like a kinda haphazard way to do it. Seems like you'd end up pushing some test into your tren vial
Click to expand...

ok draw a little more air and dont push all of it in and suck out your tren and pull it out then flick the pin a few times till all the air is at the top and push it out... easy as shit bro i do it all the time
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
with the vial upside down of cours
 
chucky1 said:
ok draw a little more air and dont push all of it in and suck out your tren and pull it out then flick the pin a few times till all the air is at the top and push it out... easy as shit bro i do it all the time
Click to expand...

thanks, repped
 
clipse said:
thats not the question

the question is the displacement of air into each vial before pulling. how do you inject air into vial #2 when you already have oil in the syringe?
Click to expand...

It's not rocket science noob. After drawing from one vial, pull back air into the syringe before changing needle and injecting air into the next :coffee:
 
I pressurize the first vial but usually not the second. You can then pressurize the other vial the next time but not the one after it. I have done it many many times with up the 4 different compounds in a pin. Never had any issues.

attachment.php
 
Any opinions on backloading syringes anyone? I have always done two injections. Please don't bash me, I have only backloaded slin pins.
 
11572590.jpg
 
Last edited:
bdeljoose said:
Any opinions on backloading syringes anyone? I have always done two injections. Please don't bash me, I have only backloaded slin pins.
Click to expand...

I actually prefer to pin twice- but back fill is gtg if you prefer-Thanks-OD
 
chucky1 said:
what oil comes out air must go in, i use 18g to draw and i still got to push air in
Click to expand...

Not sure what your doing different, but when u remove the pin, air is sucked into the vial anyways... Never once have i actually had to push air into a vial when using larger pins.

Either way we are arguing about a pretty irrelevant topic regarding pinning
 
Movin_weight said:
Not sure what your doing different, but when u remove the pin, air is sucked into the vial anyways... Never once have i actually had to push air into a vial when using larger pins.

Either way we are arguing about a pretty irrelevant topic regarding pinning
Click to expand...

:roflmao: what ever works right... its just it comes out like a waterfall if you give it air. i pull 2-3 ml's at a time so it needs air lol.
 
chucky1 said:
lol... not to pin with just to draw, that would be hardcore to pin with
Click to expand...


My bad- actually back in the old days we would hit water base suspension with 18s as was only damn thing that wouldn't clog !! Some real good shit:eek: ( LOL) Thanks chucky-OD:winkfinger:
 
heavyiron said:
I pressurize the first vial but usually not the second. You can then pressurize the other vial the next time but not the one after it. I have done it many many times with up the 4 different compounds in a pin. Never had any issues.

attachment.php
Click to expand...

That pic is better than tranny porn or even banging's mom in the arse. I have copied it and put it in the old Jamie Eason Spank Bank file. I promise I won't think of HeavyIron whilst I LHJO tonight.
 
You must log in or register to reply here.

Similar threads

robbiek426
I feel like a noob
Replies
11
Views
5K
solidassears
solidassears
Back
Top