One inch in glutes

[malfeasance]

Who uses a one inch in the glutes? Does it depend upon how lean one is?

This is me:

View attachment 32390

Lean enough for one inch for glute or need 1.5?

1.5 inch generally comes in 23 guage, and 1 inch comes in 25 gauge. I have a bunch of extra one inch (both 23 and 25) and I am curious whether I can use them for anything other than quads and delts.

 

[malfeasance]

Not sure what I did wrong on displaying the pic, but you can click on it.

 

[ted8541]

I use 1" for my glutes, never had a problem. Usually 23 gauge. I use 25 gauge for quads.

 

[GMO]

I use 1" for my glutes, never had a problem. Usually 23 gauge. I use 25 gauge for quads.

^^^This

 

[Usealittle]

Yeah, your lean..... Use 1"x25, no need to use a big pin and make more scar tissue then needed.

 

[Vibrant]

I use 25g 1 inch for glutes/quads and I've never had a problem with it. I can't really judge by your pic because you're pretty lean up top but you could have a lot of junk in the trunk but I think you'll be ok unless you want to provide some ass pics?



















No homo......

 

[mnpower]

ick on the 23 guague i used to use that and said f that noise...also kudos if you an pin your own ass

 

[skinnyguy180]

just pin your quad its a big muscle and its right in front of you.. and those pins should work fine. and if you want to pin smaller muscles like pecs bis and tris you can use the back load method with slin pins that heavy iron has posted about that seems like it would be the way to go. I havent tried it yet but i have slin pins waiting and that is like a 30 gauge needle.

 

[heavyiron]

I have used 1" in glutes quite a few times with no problems.

 

[keith1569]

I use 1in 23g for glutes quads, delts and 25g 5/8in for pecs

Sent from my Samsung Infuse 4G

 

[malfeasance]

unless you want to provide some ass pics?

Not a chance!

 

[malfeasance]

Yeah, your lean.....

I have been guessing around 12%. Does that look accurate to you?

 

[TGB1987]

I use 25G 1 in for Glutes all with no issue at all. As for BF% I would guess between 9-12%.

 

[sofargone561]

live been looking for more info on this good post!

 

[Usealittle]

I have been guessing around 12%. Does that look accurate to you?

Not 12%.... i'd say closer to 10 but not 9. Your abs are lean but the rest of you hold more fat then your abs. So, I'd go with 10-11.

 

[Usealittle]

I pin 1x25 every where on my body.... Even use 27-29x 5/8 on calfs.

 

[malfeasance]

Not 12%.... i'd say closer to 10 but not 9. Your abs are lean but the rest of you hold more fat then your abs. So, I'd go with 10-11.

Thanks for the guesses, guys.

 

[malfeasance]

kudos if you an pin your own ass

Not a problem at all. Easier than anywhere else for me.

 

[BigBird]

1" in glute is fine for me. If I am pinning a particularly large volume of compound(s) - that is 3+ cc's - I prefer the length to be 1.5" in order to get a deeper deposit.

 

[Usealittle]

Shoulders, calf, bis and tris are easy I can still get to the glute but it's gettin hard. For some reason every time I twist to get my are back there my abs cramp....lol. Quads Iv only pinned 2x and will not try em again, F that pain.

 

[KUVinny]

I use 1" 23g for glutes and quads. Works just fine.

 

[Gfunk]

I use 1 inch, 23G for gluts too..no problem for me..

 

[Drew1975]

I use 1 inch, 23G for gluts too..no problem for me..

same here mate 1" all over ...from your pic put up ide say you have no problems with the above^^

have fun.

 

[castlehill]

1.5 inch generally comes in 23 guage, and 1 inch comes in 25 gauge. I have a bunch of extra one inch (both 23 and 25) and I am curious whether I can use them for anything other than quads and delts.

I have both 23g and 25g in 1.5" that I use in glutes, all depends on oil thickness. I use 25g or 27g in .5 - 1" in delts. all pin sizes are available online.