Sterility Issues??

[secdrl]

This morning I was in the middle of drawing my Test E. As I was drawing, I noticed that the rubber stopper was getting wet and a SMALL amount of Test was leaking from where I put the pin in the vial. It wasn't dripping or anything, just made the rubber stopper completely wet.

I'm assuming this is from the multiple pins to the rubber stopper as I probably only had 2-3 more draws out of my vial before it was empty.

I sterilized the rubber stopper before putting the pin in, with this small amount of "test condensation," should I just pitch the vial and chalk it up to a loss? Or you guys think I'm gtg?

 

[pieguy]

Was the bottle flipped over since you were drawing the last bit of oil? If that's the case, no problem cause the movement and pressure while drawing probably caused oil to come out of the stopper due to the needle hole.

 

[secdrl]

Was the bottle flipped over since you were drawing the last bit of oil? If that's the case, no problem cause the movement and pressure while drawing probably caused oil to come out of the stopper due to the needle hole.

Yes, I was in the middle of drawing when the rubber stopper became wet. Vial was upside down, pin in it.

When I took the pin out, turned the vial upside down and nothing came out. So, obviously it's leaking from where I put the pin in.

 

[big60235]

Probably a pressure build up is side since you pushed air in and had not drawn the liquid out yet. Extra pressure pushed a little oil out and it just fine. Clean with alcohol and repeat the process many more times!!!!

 

[LightBearer]

Probably a pressure build up is side since you pushed air in and had not drawn the liquid out yet. Extra pressure pushed a little oil out and it just fine. Clean with alcohol and repeat the process many more times!!!!

Or possible he tilted the needle to an angle which opened the hole more while he was drawing
this happens to me with HCG, maybe his gear is thin

 

[booze]

Or possible he tilted the needle to an angle which opened the hole more while he was drawing

yeah could be this also. nothing to worry about tho, just swap it and youre GTG.

 

[ANIMALHAUS]

Don't sweat it bro. It's just a fluke!

 

[secdrl]

Thanks bros!!!