• Hello, this board in now turned off and no new posting.
    Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!
  • Check Out IronMag Labs® KSM-66 Max - Recovery and Anabolic Growth Complex

Tren Hex Vs. Tren Enan

Muscle Gelz Transdermals
IronMag Labs Prohormones
All trenbolone esters yield trenbolone, all testosterone esters yield testosterone,.. etc. What make a difference is attached ester. Now esters create a depot on the site of administration, (thus some injectable steroids have "depot" on their names) on the site of administration, and from within the muscles the hormone is released in sustained manner.

The role of esters is basically to make the synthetic hormones to resist immediate metabolism. Because of esters, the hormones are released steadily to prevent fluctuation in blood levels. The rate at which the hormones are released depends on the weight and length of the esters; some may take days, while some may take weeks. The longer and the heavier the ester attached, the longer the active life of the steroid.
 
bwrag said:
me personal I would go with e a bottle of tren E 200 is cheaper than a bottle of hex 100. twice the strength less money no brainer.
Click to expand...

,tren 200 sold on the net only tested 80mg as tren is not soluble more then 80 mg *Be advised to produce tren at higher doses need to add solvents such as PEG , BB , BA .. while PEG directly cause cancer , BB and BA attack (desolve) the silicon rubber in syrenge plunger & vial stoper so every time injecting some silicon into your body ,
 
I'm doing a run first 5 weeks tren e, 2nd 5 weeks tren hex and last 2-3 weeks tren a. I will have feedback on all. I am on 7th week. I'm cuttin. never been this big with abs. 5'9" 231.
 
spartan1 said:
,tren 200 sold on the net only tested 80mg as tren is not soluble more then 80 mg *Be advised to produce tren at higher doses need to add solvents such as PEG , BB , BA .. while PEG directly cause cancer , BB and BA attack (desolve) the silicon rubber in syrenge plunger & vial stoper so every time injecting some silicon into your body ,
Click to expand...


I have made tren E 200 and was able to make it work with 2% ba, 20%bb with no crash.
 
bwrag said:
I have made tren E 200 and was able to make it work with 2% ba, 20%bb with no crash.
Click to expand...

Like I said you would have to add BA and BB to go higher like you did.

I was just saying because I know some people like to limit the amount of Solvents they put into their body.
 
spartan1 said:
,tren 200 sold on the net only tested 80mg as tren is not soluble more then 80 mg *Be advised to produce tren at higher doses need to add solvents such as PEG , BB , BA .. while PEG directly cause cancer , BB and BA attack (desolve) the silicon rubber in syrenge plunger & vial stoper so every time injecting some silicon into your body ,
Click to expand...



That is horse shit. Every last bit of gear has ba, bb, in it. A lot of EO in it also.

Tren will hold at 100mg/ml at 2%ba and 20%bb.


There just seems to be this mystic property about tren hex that people have. I mean fuck I can find Tren E for half the price of Hex. Fuck it, E it is.
 
Last edited:
Ya sloppy I'm with you here. FUCK SCIENCE WE ALL KNOW THE STUPID ESTER SHIT AND HOW IT'S MADE BS. What I want to know is someone who had blasted both for 12-16 weeks an the difference between the two.
 
tinyshrek said:
Ya sloppy I'm with you here. FUCK SCIENCE WE ALL KNOW THE STUPID ESTER SHIT AND HOW IT'S MADE BS. What I want to know is someone who had blasted both for 12-16 weeks an the difference between the two.
Click to expand...

That's exactly what I was hoping this would generate. But we haven't got much.
 
I think I'm gonna give BD tren depot a shot this offseason why not prob at 400mg wk with some test and either drol or dbol then try some tren e
 
SloppyJ said:
That is horse shit. Every last bit of gear has ba, bb, in it. A lot of EO in it also.

Tren will hold at 100mg/ml at 2%ba and 20%bb.


There just seems to be this mystic property about tren hex that people have. I mean fuck I can find Tren E for half the price of Hex. Fuck it, E it is.
Click to expand...

Ya can you find it for $40 for 25ml ?? Because I can and it is GTG.

Edit: And by the way all there oils are this price just so you know flat rate on all oils, deca test e prop, ect
 
spartan1 said:
Ya can you find it for $40 for 25ml ?? Because I can and it is GTG.

Edit: And by the way all there oils are this price just so you know flat rate on all oils, deca test e prop, ect
Click to expand...


I was not talking of a specific brand.
 
Here's what I've learned from this thread:

Fucking absolutely nothing.
 
Not my fault the dudes around here don't know shit.

Here's what I've gathered you fag!!! :lol:

Hex ester doesn't add anything to the tren except for another carbon and oxygen making it a heavier ester. So in theory enan is more potent. I'm still gonna run some BD-Depot (Hex) cause I want to.

so suck on that one ben.

PS. I love you.
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
I agree with the captn,.No such thing as a cutter,unless were talking about clen and t3 and growth,which stimulate metabolic rate and supress appetite,therefore helping the body to reduce fat levels.That said the main difference in steriod activity is caused by the actual strength of that particular steriod,mainly.You guys heard of the anabolic,androgenic ratio,right?Well the higher the anabolic ratio the more strong the compound is and the more muscle youre capable of building with it.The androgenic part is to do with sex drive,hair growth and manliness.The anabolic part is what causes cell growth,thus speeds up the protein processing and increases it within the body,therefore increasing muscle growth.and yeah,the esther chain relates to the speed of action of the steriod within the body.
 
squigader said:
There's nothing that makes it better than tren e or acetate except the half-life. The ester doesn't have anabolic or androgenic properties, the tren does (you already know that though) - it's simply a matter of the half-life and length of release. Tren ace hits you hard and at once, and your blood levels will rise/fall like crazy. Sides would be the worst on this because of the spikes/falls.

Enanthate ester - 7 carbons
Hexahydrobenzylcarbonate - 8 carbons and an oxygen (slightly longer half life)

The difference between the two is minimal. Price differences account for rarity, and heptanoic acid (aka enanthic acid) is cheap, readily available, and widely used for many processes (artificial flavors, cigarettes, cosmetics industry, etc.), so I'm guessing tren with that ester would be cheaper. Go with the tren e.

Let me know if you have any questions.
Click to expand...

^^^This is 100% true.. the main reason people see higher fat loss on the ace ester is because acetic acid is somewhat of a fat loss agent in itself, so it would stand to reason, you would see more fat loss with the acetate ester...

however, I'm running tren e right now(I can't comment on hex, never bothered to try and hunt down legit hex, it's too rare, and I'm not interested in fakes...) and can vouch that it is VERY strong!(sloppy, I'm sure you know who's I'm running)... I'm running the tren e in a bulker right now, and I haven't noticed any more sides than on tren a(im running 700mg/wk of tren e)... Everyone does react a little differently, but I wouldn't personally pay what people want for hex, when I can get legit ace or e for cheap!
 
Holy thread revival batman!

What's funny is I actually started my tren E 1 week ago. Running it at 600mg/wk to start out with. So far, nothing to report.
 
90 % of all that is labeled tren hex is actually trten e anyway. Just as test is test as Captn said tren is tren. Its just a difference in the ester and in this case a relatively small difference at that. Tren Hex has a mystique about it because thats what true Parbolan years ago was. Just go with the tren e ...it wont make a damn bit off difference except in your wallet.
LOL and I just saw how old this thread was and was bumped a few posts ago. Sheeh ! lol
 
even raws for tren hex are far more pricy than E, I trust my suppliers but if there's barely a difference in performance I wouldn't blame them for charging me out the ass for being an idiot lol.
 
In order of worst to least side effects Ace>>Enanth> Hex. Hes is easiest on you if you are prone to tren sides.
 
safeslam said:
I agree with the captn,.No such thing as a cutter,unless were talking about clen and t3 and growth,which stimulate metabolic rate and supress appetite,therefore helping the body to reduce fat levels.That said the main difference in steriod activity is caused by the actual strength of that particular steriod,mainly.You guys heard of the anabolic,androgenic ratio,right?Well the higher the anabolic ratio the more strong the compound is and the more muscle youre capable of building with it.The androgenic part is to do with sex drive,hair growth and manliness.The anabolic part is what causes cell growth,thus speeds up the protein processing and increases it within the body,therefore increasing muscle growth.and yeah,the esther chain relates to the speed of action of the steriod within the body.
Click to expand...

The androgenic factor has a lot more to do with it than what you just posted... you are pretty on cue with the anabolic part, but there is FAR more to the androgenic factor than just sex drive, hair growth(or loss, in the case of hair on your head) and manliness.... it has a HUGE effect on glycogen loading, insulin sensitivity and many other factors that are HUGE for growth... it's not as simple as saying 'androgen or anabolic'... there's so much more to it than that, it really takes some fine tune thinking and planning based on what your goals for the cycle are
 
Never had my hands on Tren Hex myself so I can't be of much assistance with that.

Myself, prefer Tren E on bulk stacked with Test E and other AAS or sometimes by itself.
Tren Ace I use when cutting...with Masteron and Test Prop. (Not that my preferences matter to you...I wouldn't be that presumptuous.)

Tren is Tren, Test is Test...the esters being the only difference...when cutting I pin EVERY day so I use the shorter esters. Bulking, I pin 2-3x week so longer esters are better suited.

Most guys will (and have) probably told you the same thing.

You got a lot of great input with this thread from some of the masters. It's a great topic.
Always good to know what others know, experienced and prefer.
 
You must log in or register to reply here.

Similar threads

tl0311
TREN HEX Dosing
2
Replies
36
Views
10K
theCaptn'
theCaptn'
jimm
Tren hex
Replies
2
Views
798
jimm
jimm
Tysdon
Fake Tren Hex??
Replies
10
Views
3K
lifterjaydawg
L
Back
Top