debris in vial

[heckler7]

ok so I was about to pin and noticed small rubber pieces floating in the vial. I'm pretty sure I can draw without catching them, then I noticed what looks like small fibers, maybe from wiping the port then the needle pushes it thru. Also oil is leaking out of the port. Should I toss it or by syringe filters?
<img_src="http://www.ironmagazineforums.com/members/66350-albums423-picture1853t.jpg">

 

[Noheawaiian]

I wouldn't risk it.

 

[colochine]

Toss it.

 

[Digitalash]

was it like this when you got it? are the rubber pieces/oil leaking because you're using a huge gauge pin? If it was clean when you got it that's one thing, if it's had fibers and shit in it from day one that's entirely different. If it's your fault I say get syringe filters and a new vial, and don't destroy it with 18g's

 

[hypno]

Bottom line, is 1 vial worth an infection or worse?

 

[heckler7]

was it like this when you got it? are the rubber pieces/oil leaking because you're using a huge gauge pin? If it was clean when you got it that's one thing, if it's had fibers and shit in it from day one that's entirely different. If it's your fault I say get syringe filters and a new vial, and don't destroy it with 18g's

it was good before the first pin, drawing with a 23g and pinning with a 25g. I'm sure the 23g is puntching out chunks. kinda bummed cause the test was legit.

 

[Usealittle]

I pull with 21s and try to make sure not to pin the same spot in the rubber. Not had a problem using that method(not pinning the rubber in the same spot)

 

[swollen]

I pull with 21s and try to make sure not to pin the same spot in the rubber. Not had a problem using that method(not pinning the rubber in the same spot)

A light bulb just went off!
I've been try'n to stick the vial in the same spot, n never relized that-that could cuz issues...

Thx Usealittle

 

[Usealittle]

Anytime......

 

[shadowcaster]

Happens from time to time. I've seen entire batches of 50ml bottles with rubber stoppers that had dry rot. All you have to do is rescue the oil and shell out 13.00 for ten filters that can process up to 100ml each. I use Scientific Strategies (I'm not affiliated) they have the best price to reputation ratio and they sell in 10 and 25 count. Which is important if you don't know ahead of time what you're going to run through them. i.e. keep both .20 and .45 filters on hand for all your research needs

 

[heckler7]

Happens from time to time. I've seen entire batches of 50ml bottles with rubber stoppers that had dry rot. All you have to do is rescue the oil and shell out 13.00 for ten filters that can process up to 100ml each. I use Scientific Strategies (I'm not affiliated) they have the best price to reputation ratio and they sell in 10 and 25 count. Which is important if you don't know ahead of time what you're going to run through them. i.e. keep both .20 and .45 filters on hand for all your research needs

thats what I was thinking, using a filter, but I was mainly wondering if it was worth it because oil was leaking from the port where the rubber chunks broke off. So if oil is getting out that means bacteria is getting in. Wasnt sure if I should try and save it. only got 3mls gonna move on to the next vial. Is it possible to save it with a filter or is it not worth it?

 

[heckler7]

I pull with 21s and try to make sure not to pin the same spot in the rubber. Not had a problem using that method(not pinning the rubber in the same spot)

thats sounds like good advice right there, I'm gonna try that. thanks.

 

[GMO]

Either toss it or filter it with a whatman filter into a new sterile vial.

 

[shadowcaster]

oh 3ml? that's like a busted amp man, write it off

Thanks for the xp! BTW... When will I level up?

 

[Caz Rad]

That's more like 3 busted amps or around $16. If you feel comfortable filtering it, then ok - otherwise pitch it and start a new vial. Draw as Usealittle mentioned and hopefully you won't have this problem again.

 

[KingLouie]

write it off, not worth the risk... you'll blow more eating out at lunch or at happy hour than the gear costs... simply not worth rolling the dice.

 

[bulldogz]

 

[shadowcaster]

write it off, not worth the risk... you'll blow more eating out at lunch or at happy hour than the gear costs... simply not worth rolling the dice.

I know you're technically right, but there's this daemon inside of me that wouldn't let me walk away from the problem if it were me.... The little bastard want's me to get Jaundice, I swear!

 

[SloppyJ]

Little fibers? Sounds like it crashed. Heat it up and filter it back into a sterile vial. G2G.

 

[Pork Chop]

i would fill out the customer satisfaction card and send it back...... if that dont work, i would call the company and ask to speak to a manager..

 

[heckler7]

i would fill out the customer satisfaction card and send it back...... if that dont work, i would call the company and ask to speak to a manager..

LOL! I'm lucky the sh1t even showed up, to bad walmart doesnt carry gear.

 

[heckler7]

Little fibers? Sounds like it crashed. Heat it up and filter it back into a sterile vial. G2G.

I tried to post a pic in the first post but the fibers are too translucent for my camera to pick up. Theres only a couple of small fibers.

 

[charley]

yo heck...............i'd take it back to 'Sears' where you bought it........

 

[colochine]

I tried to post a pic in the first post but the fibers are too translucent for my camera to pick up. Theres only a couple of small fibers.

http://www.ironmagazineforums.com/showthread.php?p=2612085

I posted some pics in there of the floaties I had.