• Please REGISTER at Anabolic Steroid Forums, and become a member of our NEW community!

trap injections

Standard Donkey

Standard Donkey

Registered
Joined
Jun 18, 2011
Messages
6,189
Reaction score
1,087
Points
0
Location
VA
aren't bad at all, just put .5 ml x2 in each trap via .5" 28g slin pin




i feel like this will really help my traps grow because ive always had a difficult time feeling them while lifting, but now ill be able to focus on them because of the pain from the oil lol.


no blood, no leakage, good shit
 
man idk where yall people get your gear from that will pass thru this pinns.when i use 25g the plunger bends and i think it is going to brake from me pushing so hard.so i usually have to use 23 g which sucks.i have used about 5 diff ugl ,wp and hg and all of them were all to thick to use anything higher than 25g wtf were are yall geting this thin gear.
 
Heat your oil first... I push steady one I start I just keep it flowing smooth... U do have to push hard though when I pin I use a 25g now when the nurse does it she uses a 21g
 
I've tried trap injects before. They were great until I woke up the next day. No thanks!! I don't have problem building my traps, they are probably one of my best muscle groups. I'll stick to quads. I did tren in them though so maybe some prop or something long estered would be better.
 
Yep did this once and won't ever, ever do this again. Felt like I had been kicked in the traps and wasn't able to move my neck or shoulder for two days. People at work keep asked me what happened. How do you explain it. Lol.
 
^ i bet. i could see myself now with a dam syringe dangling off the side of me
 
Muscle Gelz Transdermals
IronMag Labs Prohormones
traps and lats always seemed like easy muscles to put alot of oil into, never tried it for some reason...
 
pinning your traps is not very smart... at all


scar tissue gets exposed real quick!
 
BIGBEN2011 said:
man idk where yall people get your gear from that will pass thru this pinns.when i use 25g the plunger bends and i think it is going to brake from me pushing so hard.so i usually have to use 23 g which sucks.i have used about 5 diff ugl ,wp and hg and all of them were all to thick to use anything higher than 25g wtf were are yall geting this thin gear.
Click to expand...

Im with you. 23G FTW
 
BIGBEN2011 said:
man idk where yall people get your gear from that will pass thru this pinns.when i use 25g the plunger bends and i think it is going to brake from me pushing so hard.so i usually have to use 23 g which sucks.i have used about 5 diff ugl ,wp and hg and all of them were all to thick to use anything higher than 25g wtf were are yall geting this thin gear.
Click to expand...

slin syringes have a much smaller diameter than normal syringes therefore pushing is muuuuch easier and requires much less pressure.


it's actually harder for me to push the same gear through 25g
 
I got some 27ga 3ml ones that are 1.5" and pretty much impossible to push through, 29ga slin pins aren't that bad though
 
my traps are killin' me fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuck



tne injected into virgin muscle... probably not my best idea
 
I use slins in the traps.1ml.They do tend to get alittle sore! LOL!Since i started using slins,i havent had a bad inject.I think its do to the smaller needle,and less volume.No more swollen shit.Thats convinced me to bump my glute shots down to 2ml.I use a 23g there of course.Its been a good move.Less volume per shot means more shots,of course.But the slins allow you to shoot damn near into any muscle.I like my slins! LOL!
 
I don't think I could do the trap or lat. I'll stick to glutes, delts, and bi's. Also I've tried a 27ga and my oil would barely move, and that's also warming oil up first.
 
03SVS said:
I don't think I could do the trap or lat. I'll stick to glutes, delts, and bi's. Also I've tried a 27ga and my oil would barely move, and that's also warming oil up first.
Click to expand...


is it a slin syringe or a standard syringe?
 
Standard Donkey said:
my traps are killin' me fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuck



tne injected into virgin muscle... probably not my best idea
Click to expand...

I'm glad yoar the crash test dummy :lol:

Slin pin lower quads, that's another virgin spot ppl forget about. Anything but a slin will hurt!
 
03SVS said:
I don't think I could do the trap or lat. I'll stick to glutes, delts, and bi's. Also I've tried a 27ga and my oil would barely move, and that's also warming oil up first.
Click to expand...
I've never had any problems pushing through a 28g 1/2 even when my gear is cold
 
I think the longer needle makes it harder too, along with the larger barrel. I have 3ml 27ga 1.5" that are the hardest thing ever
 
I've never had any problems pushing through a 25g 1.5" with either DP or my own using grape seed oil which is thin. Iv'e never had to heat it.
 
25 and 27/28/29 ga are a bit different bro, everything should go through 25
 
I've done up to 3cc in traps, just dont use anything that irritates like a rough prop, or suspension.
 
I tried doing my traps the other day. I started shaking too much, so I didn't do it. Just recently started doing delts with tren as a suggestion from someone. I have to say, it's been over a month, and I haven't had one cough session yet. Tren cough is the worst!
 
Ya tren cough is rough lol. I've got a ton of injection sites so I'm staying away from traps for sure. Pecs tris delts glutes lats is plenty of sites for me to rotate
 
You must log in or register to reply here.

Similar threads

01dragonslayer
How To Prevent Infections From Improper Steroid Injections
Replies
1
Views
269
01dragonslayer
01dragonslayer
01dragonslayer
SAFE INJECTIONS
Replies
0
Views
1K
01dragonslayer
01dragonslayer
Arnold
Intramuscular Steroid Injections
Replies
0
Views
2K
Arnold
Arnold
Back
Top